Introduction
This instruction manual provides detailed guidance for the assembly, operation, maintenance, and troubleshooting of your Mcage 64-inch Extra Large Double Flight Bird Cage. Please read all instructions carefully before assembly and use to ensure safe and proper functionality. This cage is designed for small birds, finches, canaries, parakeets, lovebirds, cockatiels, conures, pionus, or any small animal such as sugar gliders.
Features
- Extra Large and Durable Design: Wrought iron frame construction allows for use as one single extra-large cage or two separate compartments with a center divider. Overall size with stand: 63" Length x 19" Depth x 64" Height. Single cage size: 31" x 18" x 37" Height.
- Secure Access: Features two large swivel-out front doors with safety locks for easy access and security.
- Breeding Nest Doors: Includes two side breeding nest doors for convenience.
- Optimal Bar Spacing: Tight 1/2" bar spacing is suitable for small to medium-sized birds.
- Included Accessories: Comes with wood stand perches and transparent clear feeder cups.
- Easy Cleaning: Equipped with a slide-out bottom grate and slide-out bottom pan for simplified cleaning.
- Convenient Storage: A bottom shelf provides storage space for toys, treats, and other bird supplies.
- Removable Rolling Stand: The cage can be removed from its stand, which features wheels for easy mobility.
- Bird-Safe Finish: Features a non-toxic powder-coated finish for the safety of your birds.
Assembly Instructions
Assembly requires careful attention to detail. It is recommended that assembly be performed by adults aged 18 and older. Ensure all components are present before beginning. While no official seller assembly video is available, general assembly principles apply.
1. Unpacking and Component Identification
Carefully unpack all parts and lay them out. Identify each component using the visual guides provided. Pay close attention to the different screw sizes and their intended use.

Figure 1: Overview of all cage components and key dimensions.
2. Stand Assembly
Begin by assembling the removable rolling stand. Ensure all connections are secure. The stand provides mobility and a storage shelf.

Figure 2: The cage and its separate rolling stand with storage shelf.
3. Cage Panel Installation
Connect the cage panels using the appropriate screws. The design allows for either a single large enclosure or two separate compartments using the slide-out center divider.

Figure 3: Detail of the slide-out center divider.
4. Tray and Grate Insertion
Insert the pull-out metal grate and plastic tray into the bottom of the cage. These are essential for easy cleaning and waste collection.

Figure 4: Pull-out metal grate and plastic tray for easy cleaning.
5. Door and Accessory Installation
Install the large swivel-out front doors and the side breeding nest doors. Place the wood perches and transparent feeder cups as desired within the cage.

Figure 5: Large swivel-out front doors for convenient access.

Figure 6: Side breeding doors for specialized use.
Maintenance and Cleaning
Regular cleaning is crucial for maintaining a healthy environment for your birds. The cage's design facilitates easy cleaning.
- Daily: Remove and clean the slide-out bottom pan and grate. Replace cage liners if used. Wipe down perches and feeder cups.
- Weekly: Thoroughly clean all cage surfaces with a bird-safe disinfectant. Rinse thoroughly and allow to dry completely before returning birds.
- Monthly: Inspect all cage components for wear, damage, or loose connections. Tighten any screws as needed.
Safety Guidelines
To ensure the safety of your pets and household, adhere to the following guidelines:
- Always supervise children around the cage.
- Ensure all doors and latches are securely closed to prevent escapes.
- Regularly check for any sharp edges or broken wires that could harm your bird.
- Place the cage in a stable location, away from direct sunlight, drafts, and hazardous materials.
- Only use bird-safe cleaning products and materials.
- This product is intended for indoor use only.
Troubleshooting
If you encounter any issues during assembly or use, refer to the common problems and solutions below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cage feels wobbly after assembly. | Screws are not fully tightened. | Ensure all screws are securely tightened using the provided wrench. Check all connection points. |
| Tray slides out too easily. | Incorrect assembly of bottom frame or missing stopper. | Verify that the bottom frame components are correctly oriented and secured, allowing the tray to sit properly without excessive movement. |
| Difficulty inserting divider. | Panels not aligned correctly. | Ensure the cage panels are perfectly aligned and the divider rails are clear of obstructions. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Mcage |
| Model Number | 10115 |
| Overall Dimensions (with stand) | 63" L x 19" D x 64" H |
| Single Cage Dimensions | 31" L x 18" D x 37" H |
| Bar Spacing | 1/2 inch (12.7 mm) |
| Material | Wrought Iron (Metal) |
| Color | White Vein |
| Intended Use | Indoor |
Warranty and Support
Mcage products are manufactured to high-quality standards. For information regarding product warranty, returns, or technical support, please refer to the contact information provided at the point of purchase or visit the official Mcage website. Please retain your proof of purchase for any warranty claims.