Eglo SOTOS 1 Table Lamp (Model 32835) User Manual

1. Introduction

Thank you for choosing the Eglo SOTOS 1 Table Lamp, Model 32835. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new lamp. Please read these instructions carefully before use and retain them for future reference.

The Eglo SOTOS 1 Table Lamp features a modern design with a 35 cm diameter white/grey wooden slat shade and a matte nickel steel base. It is designed for one E27 bulb with a maximum wattage of 60W.

2. Important Safety Instructions

• Always disconnect the lamp from the power supply before cleaning or replacing the bulb.
• Do not use bulbs exceeding the maximum wattage of 60W.
• Ensure the lamp is placed on a stable, flat surface to prevent tipping.
• This lamp is designed for indoor use only (IP20 protection class). Do not expose to moisture or extreme temperatures.
• Do not modify the lamp in any way. Any modifications may void the warranty and pose a safety risk.
• Keep out of reach of children and pets.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

3. Package Contents

Please check the package contents to ensure all parts are present and undamaged:

• Eglo SOTOS 1 Table Lamp (Model 32835)
• Instruction Manual
• Note: E27 bulb is not included and must be purchased separately.

4. Setup and Installation

1. Unpack the Lamp: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
2. Position the Lamp: Place the lamp base on a stable, flat, and dry surface. Ensure there is adequate space around the lamp for ventilation and to prevent obstruction of the light.
3. Install the Bulb:
   • Ensure the lamp is unplugged from the power outlet.
   • Gently screw an E27 bulb (max. 60W) into the lamp holder until it is secure. Do not overtighten.
4. Connect to Power: Plug the power cord into a suitable electrical outlet.

An image of the Eglo SOTOS 1 Table Lamp, featuring its white/grey wooden slat shade and matte nickel base. This illustrates the assembled lamp.

5. Operating Instructions

The Eglo SOTOS 1 Table Lamp is operated via a touch control method.

1. Turning On/Off: Gently touch the metal base of the lamp to turn the light on or off.
2. Dimming (if applicable): If your lamp supports dimming (depending on the bulb and internal wiring, not explicitly stated but common for touch lamps), repeated touches may cycle through brightness levels. Refer to your bulb's specifications for dimming compatibility.

6. Care and Maintenance

• Cleaning: Disconnect the lamp from the power supply before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement:
  • Ensure the lamp is unplugged and the bulb has cooled down completely.
  • Unscrew the old E27 bulb counter-clockwise.
  • Screw in a new E27 bulb (max. 60W) clockwise until secure.
• Storage: If storing the lamp, ensure it is clean and dry. Store in its original packaging in a cool, dry place to protect it from dust and damage.

7. Troubleshooting

8. Product Specifications

9. Warranty and Support

Eglo products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Eglo website.

If you encounter any issues or require technical assistance, please contact Eglo customer support. Contact details can typically be found on the product packaging or the official Eglo website.