Sunbeam Heated Throw Blanket with Dual Pockets and 3 Heat Settings (Model 31160303) User Manual

1. Introduction and Overview

This manual provides instructions for the safe and efficient use of your Sunbeam Heated Throw Blanket, Model 31160303. This microplush heated throw features two integrated pockets for hands and feet, three adjustable heat settings, and an automatic 3-hour shut-off for convenience and safety. It is designed to provide warmth and comfort.

Image 1.1: The Sunbeam Heated Throw Blanket in Garnet, showcasing its overall design and integrated hand pocket.

2. Important Safety Instructions

READ ALL INSTRUCTIONS BEFORE USING THIS HEATED THROW. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

• Do not use with an infant, child, incapacitated person, or anyone insensitive to heat.
• Do not use with a person who cannot operate the controls properly.
• Do not use if the throw is wet.
• Never use pins or other metallic objects with this appliance.
• Do not use if the power cord or plug is damaged.
• Do not use with a generator, power converter, or inverter.
• Do not use with adjustable beds.
• Do not tuck in, fold, or bunch the heated throw. Ensure it lies flat during use.
• Do not dry clean this product. Dry cleaning solvents may damage the insulation of the heating element.
• Unplug the throw when not in use.
• Keep the control unit away from open windows or moisture.
• Inspect the throw, cord, and control regularly for any signs of wear or damage. If damaged, discontinue use immediately.

3. Package Contents

Your Sunbeam Heated Throw Blanket package should contain the following items:

• 1 x Sunbeam Heated Throw Blanket (Model 31160303)
• 1 x Detachable Heat Control Unit with Power Cord

4. Setup Instructions

1. Unpack: Carefully remove the heated throw and control unit from the packaging.
2. Connect Control: Locate the connector on the heated throw. Firmly plug the control unit's cord into this connector. Ensure it clicks securely into place.
3. Position Throw: Lay the heated throw flat on a sofa, chair, or bed. Ensure there are no folds, creases, or bunched areas. The pockets should be easily accessible.
4. Plug In: Plug the power cord from the control unit into a standard 120V AC electrical outlet.

Image 4.1: The detachable control unit, showing the power button, heat settings (High, Med, Low), and auto-off indicator.

5. Operating Instructions

The Sunbeam Heated Throw Blanket is designed for ease of use with a simple control unit.

5.1 Powering On and Adjusting Heat

1. Turn On: Press the power button on the control unit. The indicator light will illuminate.
2. Select Heat Setting: Press the heat setting button (labeled "High", "Med", "Low") to cycle through the three available heat levels. Choose the setting that provides your desired warmth.
3. Using Pockets: Utilize the integrated hand and foot pockets for enhanced warmth. The foot pocket is designed to provide extra heat concentration.
   

   Image 5.1: Demonstrating the use of the foot pocket for concentrated warmth.

   

   Image 5.2: Demonstrating the use of the hand pocket for added comfort.

5.2 Automatic Shut-Off

For safety and energy conservation, the heated throw is equipped with a 3-hour automatic shut-off feature. After approximately 3 hours of continuous operation, the throw will automatically turn off. To resume heating, simply press the power button again.

The ThermoFine® technology automatically adjusts for consistent heat, ensuring a stable temperature throughout use.

6. Maintenance and Care

Proper care will ensure the longevity and performance of your heated throw. Always follow these instructions carefully.

6.1 Washing Instructions

1. Disconnect: Ensure the heated throw is unplugged from the wall outlet and the control unit is detached from the throw.
2. Pre-soak (Optional): For best results, pre-soak the throw for 15 minutes in mild soap and cold water.
3. Machine Wash: Machine wash on the "delicate" or "gentle" cycle in cold water (maximum 30°C / 86°F). Use a small amount of mild, non-bleach detergent. Do not use bleach.
4. Rinse: Rinse on the "normal" cycle.
5. Machine Dry: Tumble dry on low heat for 5-10 minutes. Remove while still damp and air dry over a clothesline or shower rod. Do not use commercial dryers.
6. Air Dry: Ensure the throw is completely dry before reconnecting the control unit and plugging it in.

DO NOT dry clean, iron, or wring the heated throw.

Image 6.1: The heated throw is machine washable for easy care.

6.2 Storage

When not in use, store the heated throw neatly folded in a cool, dry place. Avoid placing heavy objects on top of the throw, as this may damage the internal wiring.

7. Troubleshooting

If your Sunbeam Heated Throw Blanket is not operating as expected, please refer to the following common issues and solutions:

If you experience any issues not covered here, or if the problem persists, please contact Sunbeam Customer Service.

8. Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the warranty card included with your product or visit the official Sunbeam website. You may also contact Sunbeam Customer Service directly for assistance with product operation, troubleshooting, or parts replacement.

Sunbeam Customer Service: www.sunbeam.com/support