MOZA Racing SR-P Lite Brake Pedal Performance Kit User Manual

1. Introduction

The MOZA Racing SR-P Lite Brake Pedal Performance Kit is designed to enhance the feel and performance of your compatible MOZA brake pedal. This kit provides a more progressive and realistic braking experience by combining a specialized spring and damping block, offering higher braking resistance.

The components are engineered for durability, ensuring thousands of hours of reliable use. Installation is straightforward, requiring minimal effort to integrate the kit into your existing pedal setup.

Important Note: This kit is not compatible with the standard SR-P Pedal. It is specifically designed for the SR-P Lite Brake Pedal.

2. Package Contents

Please verify that all items listed below are present in your package:

• Lite Brake Pedal Performance Kit (main assembly)
• Allen Key (x2)
• Fixed Axis (x1)
• M3 Screw (x2)
• Spacer (x2)
• Spring (x1)
• Damping Block (x1)

Figure 2.1: Exploded view showing all components of the SR-P Lite Brake Pedal Performance Kit, including the main assembly, spring, damping block, fixed axis, spacers, M3 screws, and Allen keys.

3. Setup and Installation

Follow these steps to install the SR-P Lite Brake Pedal Performance Kit:

1. Prepare the Pedal: Ensure your MOZA SR-P Lite Brake Pedal is disconnected from power and any racing rig.
2. Disassemble Existing Components: Carefully remove any existing spring or damping components from your SR-P Lite Brake Pedal. Refer to your pedal's original manual if unsure.
3. Insert Damping Block and Spring: Place the provided damping block into the pedal mechanism, followed by the spring. Ensure they are seated correctly.
4. Position Fixed Axis and Spacers: Align the fixed axis through the spring and damping block. If applicable, use the provided spacers to ensure proper fit and alignment.
5. Secure the Assembly: Fix the top two screws to secure the new performance kit assembly. Gently push the bottom pivots into their designated grooves on the pedal. Use the provided Allen keys for tightening the M3 screws.
6. Verify Installation: Once installed, gently press the pedal to ensure smooth operation and proper resistance.

Figure 3.1: The SR-P Lite Brake Pedal Performance Kit components laid out, with an inset showing the kit installed within a MOZA pedal assembly, demonstrating the integration of the spring and damping block.

Figure 3.2: The fully assembled SR-P Lite Brake Pedal Performance Kit, ready for installation or showing its integrated form.

4. Operating the Performance Kit

Once installed, the SR-P Lite Brake Pedal Performance Kit will immediately alter the feel of your brake pedal. You will experience:

• Realistic Pedal Feel: The combination of the spring and damping block provides a more progressive resistance curve, mimicking the feel of a real car's brake pedal.
• Increased Braking Resistance: The kit increases the overall resistance, requiring more force to achieve full braking, which can improve muscle memory and consistency in sim racing.
• Enhanced Immersion: The improved tactile feedback contributes to a more immersive and realistic driving simulation experience.

No additional software or calibration is typically required for the kit itself, as it mechanically modifies the pedal's feel. Any calibration should be done within your racing simulator software or MOZA's proprietary software for the pedal base.

5. Maintenance

To ensure the longevity and optimal performance of your SR-P Lite Brake Pedal Performance Kit, consider the following maintenance tips:

• Regular Cleaning: Periodically clean the components with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• Inspect for Wear: Occasionally inspect the spring and damping block for any signs of wear, cracks, or deformation. While designed for durability, extreme use may eventually lead to wear.
• Check Fasteners: Ensure all screws and fasteners remain tight. If any feel loose, gently tighten them using the appropriate Allen key. Do not overtighten.
• Storage: If storing the pedal for an extended period, keep it in a clean, dry environment away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your SR-P Lite Brake Pedal Performance Kit, please review the following common solutions:

• Kit Does Not Fit:
  • Issue: The kit does not seem to fit your MOZA pedal.
  • Solution: Verify that you own the SR-P Lite Brake Pedal. This performance kit is specifically designed for the SR-P Lite model and is not compatible with the standard SR-P Pedal. Check your pedal model number.
• Pedal Feel is Not as Expected:
  • Issue: The pedal feel is too soft, too stiff, or inconsistent after installation.
  • Solution: Re-check the installation steps. Ensure the spring and damping block are correctly seated and that all screws are tightened appropriately. Make sure no components are misaligned or obstructed.
• Squeaking or Noise:
  • Issue: The pedal makes squeaking or unusual noises after installing the kit.
  • Solution: Ensure all components are clean and free of debris. A very small amount of silicone-based lubricant (avoid petroleum-based) can be applied to contact points if necessary, but typically this should not be required. Re-check alignment.

If these steps do not resolve your issue, please contact MOZA Racing customer support for further assistance.

7. Specifications

8. Warranty and Support

For detailed warranty information regarding your MOZA Racing SR-P Lite Brake Pedal Performance Kit, please refer to the warranty documentation provided with your original MOZA Racing product or visit the official MOZA Racing website.

For technical support, troubleshooting beyond this manual, or inquiries about replacement parts, please contact MOZA Racing customer service directly. You can typically find their contact information on their official website:

Official MOZA Racing Website: mozaracing.com