Doc Johnson Main Squeeze OPTIX™ Stroker

1. Product Overview

The Doc Johnson Main Squeeze OPTIX™ Stroker is designed for personal pleasure, featuring a unique variable pressure system. It combines a textured ULTRASKYN™ interior with a durable, clear outer case. The innovative design allows users to control both pressure and suction through a squeezable grip and an adjustable end cap.

Image 1.1: The Doc Johnson Main Squeeze OPTIX™ Stroker in Crystal Blue, showcasing its transparent outer casing and internal texture.

Key Features:

• Textured ULTRASKYN™ Interior: Provides a realistic and stimulating experience.
• Variable Pressure Control: A squeeze plate on the outer case allows users to adjust internal pressure.
• Adjustable Suction: The end cap can be twisted to modify suction strength.
• Discreet Design: Features a non-anatomical entrance and visually stimulating clear material.
• Easy Disassembly: Designed for complete disassembly to facilitate thorough cleaning.

Image 1.2: A detailed view of the internal textured sleeve of the Main Squeeze OPTIX™ Stroker.

2. Setup

Before first use, and after each subsequent use, it is crucial to clean the product thoroughly. The Main Squeeze OPTIX™ Stroker is designed for easy disassembly to ensure complete hygiene.

Initial Preparation:

1. Unpack: Carefully remove all components from the packaging.
2. Disassemble: Gently twist and pull the components apart. The product is designed to separate into its main parts for cleaning. Refer to the Maintenance section for detailed disassembly instructions.
3. Clean: Wash all parts with warm water and a mild, toy-safe soap. Rinse thoroughly.
4. Dry: Allow all components to air dry completely before reassembly.
5. Lubricate: For optimal comfort and performance, apply a generous amount of water-based lubricant to the entrance and interior of the sleeve before use.

Image 2.1: The Doc Johnson Main Squeeze OPTIX™ Stroker in its retail packaging.

3. Operating Instructions

The Main Squeeze OPTIX™ Stroker offers customizable sensations through its variable pressure and suction features.

Using the Product:

1. Apply Lubricant: Ensure a sufficient amount of water-based lubricant is applied to the product's entrance and your body for comfortable insertion.
2. Insert: Gently insert into the product.
3. Adjust Pressure: Locate the squeeze plates on the sides of the outer case. Squeeze these plates to increase the internal pressure and intensify the sensation. Release to reduce pressure.
4. Control Suction: The end cap of the device can be twisted. Rotate the end cap clockwise to increase suction, creating a tighter seal and stronger vacuum effect. Rotate counter-clockwise to decrease suction.
5. Experiment: Adjust both the squeeze pressure and end cap rotation to find your preferred level of sensation.

Image 3.1: A hand demonstrating how to hold and squeeze the Main Squeeze OPTIX™ Stroker to control pressure.

Image 3.2: A close-up view of the adjustable end cap, which can be twisted to modify suction.

4. Maintenance and Cleaning

Proper cleaning and maintenance are essential for the longevity and hygiene of your Doc Johnson Main Squeeze OPTIX™ Stroker.

Cleaning Instructions:

1. Disassemble: After each use, fully disassemble the product. The outer case can be separated from the inner ULTRASKYN™ sleeve and the end cap.
2. Wash: Wash all components thoroughly with warm water and a mild, toy-safe soap. Ensure all lubricant and residue are removed from both the interior and exterior surfaces.
3. Rinse: Rinse all parts under running water until no soap residue remains.
4. Dry: Allow all components to air dry completely before reassembly or storage. Avoid using towels, as they may leave lint.
5. Storage: Store the clean, dry product in a cool, dry place, away from direct sunlight and extreme temperatures.

Image 4.1: The Main Squeeze OPTIX™ Stroker disassembled into its main components for easy cleaning.

5. Troubleshooting

If you encounter any issues with your Doc Johnson Main Squeeze OPTIX™ Stroker, please refer to the following common solutions.

Common Issues:

• Difficulty with Insertion:
  Solution: Ensure you are using a generous amount of water-based lubricant. Reapply as needed during use.
• Insufficient Suction:
  Solution: Twist the end cap clockwise to tighten the seal and increase the vacuum effect. Ensure all components are properly assembled and there are no gaps.
• Lack of Pressure Control:
  Solution: Verify that the squeeze plates on the outer case are functioning correctly and are not obstructed. Ensure the inner sleeve is correctly seated within the outer case.
• Product Feels Sticky or Residue Remains After Cleaning:
  Solution: Use a dedicated toy cleaner or a mild, toy-safe soap. Rinse thoroughly with warm water. Ensure the product is completely dry before storage.

If the issue persists, please contact Doc Johnson customer support for further assistance.

6. Specifications

7. Safety Information

Please read and understand all safety information before using this product.

• This product is intended for adult use only.
• Clean the product thoroughly before first use and after each subsequent use.
• Use only water-based lubricants with this product. Oil-based lubricants may damage the material.
• Discontinue use immediately if you experience any discomfort, irritation, or pain.
• Do not use on broken, irritated, or swollen skin.
• Keep out of reach of children.
• Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. (Note: This disclaimer is provided by the manufacturer and is included for informational purposes.)

8. Warranty and Support

For information regarding product warranty, returns, or technical support, please contact Doc Johnson Enterprises directly.

Doc Johnson Customer Support:
Please refer to the official Doc Johnson website or product packaging for the most current contact information.

For general inquiries or to explore other products, visit the Doc Johnson Store on Amazon.