mDesign Steel Freestanding 3-Tier Storage Organizer Tower Instruction Manual

1.1 Unpacking

Carefully remove all components from the packaging. Verify that all parts listed in the assembly instructions are present. Keep packaging materials until assembly is complete to ensure no small parts are discarded.

1.2 Assembly Instructions

The mDesign 3-Tier Storage Organizer is designed for straightforward assembly. All necessary hardware and easy-to-follow instructions are included in the package. Please refer to the provided video for a visual guide to assembly.

General Assembly Steps:

1. Identify all components: side panels, baskets, and hardware (screws, hex key).
2. Connect the side panels as per the included diagram, ensuring proper alignment of screw holes.
3. Secure the connections using the provided screws and hex key.
4. Carefully place each basket onto the designated hooks or slots on the assembled frame.
5. Ensure all connections are tight and the unit is stable before use.

Important: Do not overload shelves during or after assembly. Always follow assembly instructions for safe installation.

2.1 Intended Use

The mDesign Steel Freestanding 3-Tier Storage Organizer is designed for organizing various items in bathrooms, powder rooms, master baths, guest baths, laundry rooms, kitchens, offices, garages, and playrooms. It is ideal for storing:

• Bath towels, washcloths, facial tissues, extra toilet paper rolls, bar soap.
• Shampoo, conditioner, body wash, hand lotion, sprays, facial scrubs, moisturizers, oils, serums, wipes, sheet masks, bath bombs.
• Hair styling tools: hair spray, waxes, pastes, spritzers, hair brushes, combs, blow dryers, straighteners, curling irons/wands.
• Fresh fruits and vegetables (in kitchens/pantries, open grid design allows air circulation).
• Detergents and cleaning supplies (in laundry/utility rooms).
• Office supplies, craft items, toys.

2.2 Placement and Stability

This freestanding unit is designed for stability on flat surfaces. Its slim design is perfect for small spaces, fitting nicely next to pedestal and bathroom vanity cabinets. Ensure the unit is placed on a level surface to prevent tipping.

Image: The mDesign 3-Tier Storage Organizer in Graphite Gray, positioned in a bathroom. The baskets are filled with bath salts, folded towels, and a jar of potpourri, demonstrating its use for organizing bathroom essentials.

Image: Two mDesign 3-Tier Storage Organizers showcasing versatility. One is in an office setting, holding documents and a plant. The other is in a craft setting, storing yarn and craft supplies, highlighting its adaptability beyond the bathroom.

3.1 Cleaning

To clean the mDesign 3-Tier Storage Organizer, simply wipe it with a damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these may damage the durable finish.

3.2 Inspection

Periodically inspect the unit for any loose connections or signs of wear. Tighten any screws as needed to maintain stability. Ensure the baskets are securely seated in their positions.

4.1 Instability/Wobbling

If the unit feels unstable or wobbles:

• Ensure it is placed on a completely flat and level surface.
• Check all screws and connections to ensure they are tightened securely.
• Verify that the side panels are correctly assembled and aligned.

4.2 Difficulty Assembling

If you encounter difficulty during assembly:

• Re-read the assembly instructions carefully.
• Watch the assembly video again for visual guidance.
• Ensure you are using the correct hardware for each step.
• Do not force parts together; if they don't fit, recheck alignment.