1. Introduction
This manual provides essential instructions for the safe and efficient operation of your MPM MSG-03 Electric Food Dehydrator. Please read it thoroughly before first use and retain it for future reference. The MSG-03 dehydrator is designed to preserve the nutritional value of vegetables, fruits, and herbs by gently removing moisture, allowing you to create healthy, long-lasting snacks and ingredients.
2. Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury.
- Read all instructions before operating the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical shock, do not immerse the cord, plugs, or appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact customer service for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- This appliance is equipped with an overheat protection system that automatically switches off the dehydrator if necessary.
3. Product Components
The MPM MSG-03 Food Dehydrator consists of the following main parts:
- Base Unit: Contains the heating element, fan, and control switch.
- Drying Trays: Four adjustable, BPA-free trays with a diameter of 28 cm for holding food items.
- Lid: Covers the top tray to retain heat and ensure even drying.
- Power Cord: For connecting the appliance to an electrical outlet.

Image 3.1: Overview of the MPM MSG-03 Food Dehydrator, showing the base unit, stacked trays, and lid.
4. Setup
- Unpacking: Carefully remove the dehydrator and all its components from the packaging. Dispose of packaging materials responsibly.
- Initial Cleaning: Before first use, wash the drying trays and lid in warm, soapy water. Rinse thoroughly and dry completely. Wipe the base unit with a damp cloth. Do not immerse the base unit in water.
- Placement: Place the dehydrator on a stable, flat, heat-resistant surface, away from water sources and other heat-generating appliances. Ensure adequate ventilation around the unit.
- Assembly: Place the desired number of drying trays onto the base unit. Ensure they are stacked correctly and securely. Place the lid on top of the uppermost tray.
5. Operating Instructions
5.1 Food Preparation
Proper food preparation is crucial for successful dehydration.
- Washing: Always wash fruits, vegetables, and herbs thoroughly before preparation.
- Slicing: Cut food into uniform slices (approximately 0.5 cm / 0.2 inches thick) to ensure even drying. Remove pits, cores, and tough skins where necessary.
- Pre-treatment (Optional): Some fruits (e.g., apples, bananas) may benefit from a pre-treatment (e.g., lemon juice bath) to prevent browning. Vegetables like carrots or broccoli may be blanched briefly to preserve color and texture.

Image 5.1: Example of fresh produce, including mushrooms and various herbs, suitable for dehydration.
5.2 Loading Trays
Arrange food items on the drying trays in a single layer, ensuring there is space between pieces for air circulation. Do not overlap or overcrowd the trays.

Image 5.2: Drying trays filled with uniformly sliced fruits (apples, bananas) and vegetables (bell peppers) for dehydration.
5.3 Drying Process
- Once trays are loaded and stacked, place the lid on top.
- Plug the power cord into a standard electrical outlet.
- Turn the appliance ON using the switch on the base unit. The dehydrator operates at 250W, providing efficient and rapid drying.
- The dehydrator's air recirculation system ensures uniform heat distribution across all trays, promoting consistent drying.
- Drying times vary depending on the type of food, thickness, moisture content, and ambient humidity. It is recommended to check the food periodically.
- To ensure even drying, you may rotate the trays or rearrange food items every few hours.
- Food is fully dehydrated when it is pliable but not sticky, or brittle and breaks easily (e.g., for chips).
- Once drying is complete, turn the appliance OFF and unplug it from the outlet. Allow the food to cool completely before storing.

Image 5.3: Example of perfectly dried apple slices, ready for storage or consumption.
6. Maintenance and Cleaning
Regular cleaning ensures the longevity and hygienic operation of your dehydrator.
- Unplug: Always unplug the dehydrator from the power outlet and allow it to cool completely before cleaning.
- Trays and Lid: The drying trays and lid are dishwasher safe. Alternatively, they can be washed by hand in warm, soapy water. Rinse thoroughly and dry completely before storing or reassembling.
- Base Unit: Wipe the exterior of the base unit with a soft, damp cloth. Do not use abrasive cleaners or scourers. Never immerse the base unit in water or any other liquid.
- Storage: Store the clean and dry dehydrator in a cool, dry place.
7. Troubleshooting
If you encounter any issues with your dehydrator, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dehydrator does not turn on. | Not plugged in; power switch off; power outage; overheat protection activated. | Ensure the unit is securely plugged into a working outlet. Check the ON/OFF switch. Verify power supply. Allow the unit to cool down if overheat protection was triggered. |
| Uneven drying. | Food slices are not uniform; trays overcrowded; insufficient air circulation. | Ensure food is sliced evenly. Do not overcrowd trays; leave space for air. Rotate trays periodically during the drying process. |
| Food not drying properly. | Drying time too short; food too thick; high ambient humidity. | Extend drying time. Ensure food is sliced thinly. Operate in a dry environment. |
If the problem persists after attempting these solutions, please contact customer support.
8. Specifications
- Model: MSG-03
- Brand: MPM
- Power: 250 Watts
- Voltage: 230 Volts
- Number of Trays: 4 (adjustable height)
- Tray Diameter: 28 cm
- Material: Plastic (BPA-free trays)
- Color: White
- Product Dimensions (L x W x H): 31 x 28 x 16 cm
- Item Weight: 1.58 Kilograms
- Dishwasher Safe: Yes (trays and lid)
- Safety Features: Overheat protection

Image 8.1: The MPM MSG-03 Food Dehydrator highlighting its 250 Watt power.
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
For further assistance, you may also visit the official MPM website or contact their customer service department directly.





