1. Introduction
Thank you for choosing the La Crosse Technology WS6825 Weather Station. This device provides accurate indoor and outdoor temperature and humidity readings, along with a weather forecast, time, and date. This manual will guide you through the setup, operation, and maintenance of your new weather station to ensure optimal performance.
The WS6825 features a clear, colorful display and includes three wireless outdoor sensors for comprehensive environmental monitoring.
2. Package Contents
Please ensure all components are present before proceeding with the setup:
- 1 x Display Unit (Main Station)
- 3 x Temperature/Humidity Sensors (Wireless Outdoor Sensors)
- 1 x USB Cable (for optional power)
- 1 x Instruction Manual (this document)
Image 1: La Crosse Technology WS6825 Weather Station with main display unit and three wireless outdoor sensors.
3. Product Overview
3.1 Main Display Unit
The main display unit shows all collected data, including indoor and outdoor temperatures, humidity, time, date, and weather forecast. It features a color screen for easy readability and several control buttons.
Image 2: Close-up view of the WS6825 main display unit, illustrating various data points.
3.2 Wireless Outdoor Sensors
The three wireless sensors transmit temperature and humidity data to the main unit via 433 MHz radio frequency. Each sensor can be placed in a different location to monitor various outdoor conditions.
3.3 Control Buttons
The main unit features several buttons for configuration and data access:
- SNOOZE/LIGHT: Activates snooze for alarms or adjusts backlight.
- SETTINGS: Enters setup mode for time, date, and other preferences.
- MIN/MAX: Displays minimum and maximum recorded values.
- +/-: Adjusts values during setup or navigates channels.
- CHANNEL: Switches between data from different outdoor sensors.
- SENSOR: Manually searches for outdoor sensors.
- INFO: Displays additional information like heat index or dew point.
- ALERTS: Sets temperature/humidity alerts.
- ALARM: Sets and activates time alarms.
4. Setup
4.1 Powering the Main Unit
- Insert 3 AAA batteries (not included) into the main display unit, observing polarity.
- Alternatively, connect the provided USB cable to the main unit and a power adapter (not included) for continuous power.
- The display will light up and begin searching for sensors.
4.2 Installing Batteries in Outdoor Sensors
- Open the battery compartment on each of the three outdoor sensors.
- Insert 2 AA batteries (not included) into each sensor, observing polarity.
- Close the battery compartments securely.
4.3 Sensor Pairing
The main unit should automatically detect and pair with the outdoor sensors once they are powered on. If pairing does not occur within a few minutes:
- Ensure the sensors are within range (up to 100 meters in open air).
- Press the SENSOR button on the main unit to initiate a manual search.
- On each outdoor sensor, there is a small reset button (often labeled 'TX' or 'RESET'). Press this button to force a signal transmission.
4.4 Initial Settings (Time, Date, Units)
- Press and hold the SETTINGS button to enter setup mode.
- Use the +/- buttons to adjust values (e.g., hour, minute, year, month, day).
- Press SETTINGS again to confirm each setting and move to the next.
- You can typically set 12/24-hour format, Celsius/Fahrenheit units, and language preference during this process.
- Exit setup mode by pressing SETTINGS repeatedly until the normal display returns, or wait for it to time out.
4.5 Sensor Placement
For accurate outdoor readings, consider the following:
- Place sensors in a shaded area, away from direct sunlight, to prevent inaccurate temperature readings.
- Ensure sensors are protected from direct rain or snow.
- Mount sensors vertically to allow for proper drainage.
- Avoid placing sensors near large metal objects, electrical appliances, or sources of heat/cold that could interfere with readings or transmission.
- Keep sensors within the effective transmission range of the main unit.
5. Operating the Weather Station
5.1 Display Information
The display is divided into several sections, showing:
- Time and Date: Current time, day of the week, and date.
- Indoor Conditions: Indoor temperature and humidity.
- Outdoor Conditions: Outdoor temperature and humidity from the selected sensor.
- Weather Forecast: Icons representing predicted weather conditions (e.g., sunny, cloudy, rainy).
- Comfort Level: An indicator of indoor comfort based on temperature and humidity.
- Trend Indicators: Arrows showing if temperature or humidity is rising, falling, or stable.
Image 3: Angled view of the WS6825 display, showing the clear segmentation of information.
5.2 Viewing Multiple Outdoor Sensors
Press the CHANNEL button to cycle through the readings from the three connected outdoor sensors (CH1, CH2, CH3). The display will indicate which channel's data is currently shown.
5.3 Minimum/Maximum Readings
Press the MIN/MAX button to view the highest and lowest recorded indoor and outdoor temperatures and humidity levels since the last reset. Press again to cycle through MIN, MAX, and current readings. To reset the MIN/MAX values, press and hold the MIN/MAX button while viewing them.
5.4 Setting Alarms
- Press the ALARM button to view the alarm time.
- Press and hold the ALARM button to enter alarm setting mode.
- Use the +/- buttons to adjust the hour and minute.
- Press ALARM to confirm each setting.
- Press ALARM once more to activate or deactivate the alarm (an alarm icon will appear/disappear).
5.5 Temperature/Humidity Alerts
The station may support setting high/low alerts for temperature and humidity. Refer to the on-screen prompts or the ALERTS button functionality for detailed instructions on setting these thresholds.
6. Maintenance
6.1 Battery Replacement
- Replace batteries in the main unit and sensors when the low battery indicator appears on the display.
- Always replace all batteries in a unit at the same time with new batteries of the same type.
- Dispose of old batteries responsibly according to local regulations.
6.2 Cleaning
Wipe the display unit and sensors with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the surfaces or electronic components.
6.3 Environmental Considerations
Periodically check the placement of your outdoor sensors to ensure they remain protected from extreme weather and are still providing accurate readings. Clear any debris that may accumulate around the sensors.
7. Troubleshooting
| Problem | Possible Solution |
|---|---|
| No outdoor temperature/humidity reading. |
|
| Inaccurate temperature/humidity readings. |
|
| Display is blank or dim. |
|
| Time/Date is incorrect. |
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | WS6825BLA+2 |
| Brand | La Crosse Technology |
| Product Dimensions | 15 x 4.2 x 12.3 cm (Main Unit) |
| Weight | 0.3 g (Main Unit) |
| Indoor Temperature Range | 0°C to 50°C (32°F to 122°F) |
| Outdoor Temperature Range | -40°C to 60°C (-40°F to 140°F) |
| Indoor Humidity Range | 1% to 99% RH |
| Outdoor Humidity Range | 1% to 99% RH |
| Connectivity Technology | Radio Frequency (433 MHz) |
| Power Source (Main Unit) | Battery Powered (3x AAA, not included) or USB Cable |
| Power Source (Sensors) | Battery Powered (2x AA per sensor, not included) |
| Material | Kunststoff (Plastic) |
| Special Features | Color Display, Time & Date, Alarm with Snooze, Calendar, Min/Max Records, Trend Indicators, Weather Forecast, Comfort Level, Heat Index, Dew Point |
9. Warranty and Support
La Crosse Technology products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official La Crosse Technology website. If you encounter any issues not covered in this manual, please contact La Crosse Technology customer support for assistance.
Please retain your proof of purchase for any warranty claims.
