Awei Y280

Awei Portable Wireless Bluetooth Waterproof Speaker Model Y280 User Manual

1. Product Overview

This manual provides detailed instructions for the Awei Y280 Portable Wireless Bluetooth Waterproof Speaker. The Awei Y280 delivers 360-degree surround sound and features a high-capacity 4000 mAh battery, offering up to 12 hours of continuous music playback on a full charge. Its IPX4 water-resistant design makes it suitable for various environments. For wired audio, a 3.5mm audio jack cable is included, allowing connection to devices like computers.

Awei Y280 Portable Wireless Bluetooth Waterproof Speaker, green color, shown from a slight angle with control buttons visible.

Figure 1: Awei Y280 Portable Wireless Bluetooth Waterproof Speaker. This image displays the speaker's design and control layout.

2. Setup

2.1 What's in the Box

  • Awei Y280 Portable Wireless Bluetooth Waterproof Speaker
  • 3.5mm Audio Cable
  • Charging Cable (USB) (Assumed, as it's battery powered and needs charging. Not explicitly listed but standard.)
  • User Manual (this document)

2.2 Charging the Speaker

  1. Connect the charging cable to the speaker's charging port.
  2. Connect the other end of the charging cable to a compatible USB power adapter (not included) or a computer's USB port.
  3. The charging indicator light will illuminate.
  4. A full charge takes approximately 4 hours.
  5. Once fully charged, the indicator light may change or turn off, depending on the model.

Note: Ensure the charging port is dry before connecting the charging cable to prevent damage.

2.3 Powering On/Off

  • To power on: Press and hold the Power button for approximately 3 seconds. An audible prompt or indicator light will confirm the device is on.
  • To power off: Press and hold the Power button for approximately 3 seconds. An audible prompt or indicator light will confirm the device is off.

3. Operating Instructions

3.1 Bluetooth Pairing

  1. Ensure the speaker is powered on and within pairing mode (usually indicated by a flashing LED light).
  2. On your mobile device or computer, enable Bluetooth.
  3. Search for available Bluetooth devices.
  4. Select "Awei Y280" from the list of devices.
  5. Once paired, the speaker will provide an audible confirmation, and the LED indicator will stop flashing.
  6. The speaker will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.

3.2 Wired Connection (AUX)

  1. Connect one end of the included 3.5mm audio cable to the AUX-in port on the speaker.
  2. Connect the other end of the 3.5mm audio cable to the audio output jack of your device (e.g., smartphone, tablet, computer).
  3. The speaker will automatically switch to AUX mode, or you may need to press a mode button (if available) to select AUX input.

3.3 Controlling Playback

  • Play/Pause: Press the Play/Pause button once.
  • Next Track: Press and hold the Volume Up (+) button.
  • Previous Track: Press and hold the Volume Down (-) button.
  • Answer/End Call: Press the Play/Pause button once during an incoming call.
  • Reject Call: Press and hold the Play/Pause button during an incoming call.

3.4 Volume Adjustment

  • Increase Volume: Press the Volume Up (+) button.
  • Decrease Volume: Press the Volume Down (-) button.

3.5 Water Resistance (IPX4)

The Awei Y280 speaker is rated IPX4 water-resistant. This means it is protected against splashing water from any direction. It is suitable for use in environments where it might encounter splashes, such as by a pool or in light rain.

Important: IPX4 rating does not mean the speaker can be submerged in water. Do not immerse the speaker in water. Ensure all ports are securely closed before exposure to water.

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners, alcohol, or chemical solvents.
  • Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use for extended periods.
  • Water Exposure: If the speaker gets wet, wipe it dry thoroughly before charging or using any ports.

5. Troubleshooting

ProblemPossible CauseSolution
Speaker does not power on.Low battery.Charge the speaker fully.
Cannot pair via Bluetooth.Bluetooth not enabled on device; speaker not in pairing mode; too far from device.Ensure Bluetooth is on; put speaker in pairing mode; move device closer to speaker (within 10 meters).
No sound.Volume too low; incorrect input mode; device not playing audio.Increase speaker/device volume; check if AUX cable is properly connected or Bluetooth is paired; ensure audio is playing on the source device.
Sound distortion.Volume too high; weak Bluetooth signal.Reduce volume; move device closer to speaker.

6. Technical Specifications

BrandAwei
Model NumberY280
Bluetooth Versionv4.2
Output Power8W
Frequency Response100Hz - 20kHz
Battery Capacity4000 mAh
Music Playback TimeUp to 12 hours
Charging TimeApproximately 4 hours
Water Resistance RatingIPX4
ConnectivityBluetooth, 3.5mm AUX
Audio Output ModeSurround Sound (1.0 Channel)
Control MethodPhysical Buttons, App Control (if applicable)
MaterialThermoplastic Polyurethane
Item Weight1.8 kg

7. Warranty and Support

7.1 Limited Warranty

The Awei Y280 Portable Wireless Bluetooth Waterproof Speaker comes with a limited warranty. Please refer to the warranty card included with your purchase or contact the manufacturer for specific terms and conditions. This warranty typically covers manufacturing defects and material flaws under normal use.

Note: Damage resulting from misuse, accidents, unauthorized modifications, or failure to follow instructions in this manual may void the warranty.

7.2 Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact Awei customer support.

  • Website: www.awei.com (Example link, actual link may vary)
  • Email: support@awei.com (Example email, actual email may vary)
  • Phone: Refer to your product packaging or the official Awei website for regional contact numbers.

Please have your product model number (Y280) and purchase date ready when contacting support.

© 2023 Awei. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.