Product Overview
The JONATHAN Y JYL4024A Arthur 29" Ceramic LED Table Lamp features a cream-colored glaze and quatrefoil trellis texture, offering a transitional design. It includes a hardback linen shade and brass accents. This lamp is designed for indoor use and comes with an energy-saving LED bulb.
Image: The JONATHAN Y Arthur table lamp with a cream ceramic base and white linen shade.
Setup and Assembly
Follow these steps to assemble your JONATHAN Y Arthur table lamp. Refer to the assembly video for visual guidance.
Assembly Video
Video: Official assembly instructions for JONATHAN Y table lamps, demonstrating the steps to connect the socket, attach the harp, and secure the shade.
Step-by-Step Instructions:
- Pull Wire: Carefully pull the lamp wire through the top of the lamp base until the socket assembly is accessible.
- Secure Socket: Ensure the socket reaches the top of the lamp base.
- Twist Lamp Base: Turn the lamp base over and twist the base onto the socket assembly until it is securely tightened.
- Attach Harp: Squeeze the ends of the harp and insert them into the saddle on the lamp socket.
- Place Shade: Position the lamp shade onto the harp.
- Secure Finial: Place the finial onto the threaded rod at the top of the harp and tighten it to secure the shade.
- Straighten Shade: Adjust the shade as needed to ensure it is straight and centered.
- Install Bulb: Screw the included LED bulb into the lamp socket.
Image: Diagram showing the dimensions of the JONATHAN Y Arthur table lamp, including height, shade width, and shade height.
Operating Instructions
The JONATHAN Y Arthur table lamp is designed for simple operation.
- Power Connection: Plug the lamp's cord into a standard 120-volt electrical outlet.
- Turning On/Off: The lamp features a rotary switch. Rotate the switch clockwise to turn the lamp on, and counter-clockwise to turn it off.
- Bulb Type: This lamp uses an E26 base LED bulb. An energy-saving LED bulb is included.
- Smart Outlet Compatibility: The lamp is compatible with Alexa smart outlets (sold separately) for voice control or scheduled operation.
Maintenance
Proper care will ensure the longevity and appearance of your lamp.
- Cleaning the Base: Dust the ceramic base with a soft, dry cloth. Avoid abrasive cleaners or harsh chemicals, as these may damage the finish.
- Cleaning the Shade: Gently dust the linen shade with a soft brush or a lint roller. Spot clean with a damp cloth if necessary, but avoid saturating the fabric.
- Bulb Replacement: Ensure the lamp is unplugged before replacing the bulb. Allow the bulb to cool completely before handling. Use only E26 base LED bulbs.
- General Care: Periodically check the electrical cord for any signs of damage. Do not place the lamp in areas of high humidity or direct sunlight for extended periods.
Troubleshooting
If you encounter issues with your lamp, refer to the following common solutions:
- Lamp Does Not Turn On:
- Check if the power cord is securely plugged into the wall outlet.
- Ensure the wall outlet is functional by testing it with another appliance.
- Verify that the bulb is screwed in tightly and is not burnt out. Replace the bulb if necessary.
- Confirm the rotary switch is fully turned to the "on" position.
- Flickering Light:
- Tighten the light bulb in the socket.
- Ensure the bulb is compatible with the lamp's wattage requirements (up to 100 watts).
- If using a smart outlet, ensure it is functioning correctly.
- Shade is Uneven:
- Loosen the finial, adjust the shade to be level, and then re-tighten the finial.
- Ensure the harp is properly seated in the socket's saddle.
Specifications
| Brand | JONATHAN Y |
| Model Name | JYL4024A (Arthur) |
| Product Dimensions | 16"D x 16"W x 29"H |
| Item Weight | 10.34 pounds |
| Material | Ceramic, Metal (Iron base) |
| Finish Type | Painted |
| Shade Material | Linen |
| Shade Color | White |
| Light Source Type | LED |
| Bulb Base | E26 |
| Wattage | 100 watts (Max) |
| Brightness | 800 Lumens (Included Bulb) |
| Voltage | 120 Volts |
| Switch Type | Rotary |
| Certification | ETL, UL |
| Indoor/Outdoor Usage | Indoor |
Warranty Information
The JONATHAN Y JYL4024A Arthur 29" Ceramic LED Table Lamp comes with a 30-day manufacturer warranty for defects only. This warranty does not cover normal wear and tear. Visible damages not noted upon delivery will be considered customer damage and will not be warranted. All products are inspected upon arrival, and worn, dirty, or stained merchandise will not be accepted for warranty claims.
For warranty inquiries, please contact the internet customer service center.
Support
For additional support, product information, or to view other JONATHAN Y products, please visit the official JONATHAN Y website or contact their customer service department.
You can find more information at the JONATHAN Y Store on Amazon.
