JONATHAN Y JYL2050A Table Lamp

1. Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your JONATHAN Y JYL2050A Table Lamp. Please read all instructions carefully before assembly and retain this manual for future reference.

Important Safety Information

• Always disconnect the power supply before cleaning, changing the bulb, or performing any maintenance.
• Do not use this lamp in wet locations. For indoor use only.
• Ensure the lamp is placed on a stable, level surface to prevent tipping.
• Use only the specified bulb type and wattage to avoid overheating.
• Keep flammable materials away from the lamp.

2. Product Overview and Components

The JONATHAN Y JYL2050A Table Lamp features a clear/chrome finish with a white linen shade. Familiarize yourself with the main components:

Image 1: Labeled components of the JYL2050A Table Lamp, highlighting the linen shade, LED bulb, crystal base, and rotary switch.

• Shade: White linen drum shade.
• Finial: Decorative top piece securing the shade.
• Socket: Holds the light bulb.
• Lamp Body: Chrome-finished metal and crystal pillar.
• Base: Stable square base with protective barrier.
• Rotary Switch: Integrated on the lamp body for power control.
• Power Cord: 60-inch silk cord with a standard USA 2-prong plug.
• LED Bulb: One LED bulb is included.

3. Setup and Assembly

The JYL2050A Table Lamp is designed for easy assembly. Follow these steps:

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, flat, and soft surface to prevent scratches. Ensure all components listed in Section 2 are present.
2. Attach Shade: Place the white linen drum shade onto the lamp body, aligning it over the socket.
3. Secure Finial: Screw the finial onto the top of the lamp body, through the center of the shade, until the shade is securely held in place. Do not overtighten.
4. Install Bulb: Carefully screw the provided LED bulb into the lamp socket. Ensure the bulb is fully seated but do not overtighten.
5. Position Lamp: Place the assembled lamp on your desired stable surface.
6. Connect to Power: Plug the power cord into a standard 120V electrical outlet.

Image 2: The JYL2050A Table Lamp fully assembled and ready for use.

4. Operating Instructions

To operate your JONATHAN Y JYL2050A Table Lamp:

• Turning On/Off: Locate the rotary switch on the lamp body. Rotate the switch clockwise to turn the lamp ON. Rotate it counter-clockwise to turn the lamp OFF.
• Bulb Information: The lamp uses an E26 base LED bulb. The included bulb provides 800 lumens of brightness. When replacing, ensure the new bulb does not exceed 100 watts.

5. Maintenance

Regular maintenance ensures the longevity and appearance of your lamp.

Cleaning

• Lamp Body (Crystal/Chrome): Wipe with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or chemicals that may damage the finish.
• Shade (Linen): Dust regularly with a soft brush or a lint roller. For minor spots, gently dab with a clean, damp cloth. Do not saturate the fabric.

Bulb Replacement

1. Ensure the lamp is unplugged from the power outlet and the bulb has cooled completely.
2. Unscrew the finial and remove the shade.
3. Carefully unscrew the old bulb from the socket.
4. Screw in a new E26 base LED bulb, ensuring it does not exceed 100 watts.
5. Replace the shade and secure it with the finial.

6. Troubleshooting

If you encounter issues with your lamp, refer to the following common problems and solutions:

• Lamp Does Not Light Up:
  • Check if the power cord is securely plugged into the outlet.
  • Ensure the wall switch (if applicable) is in the ON position.
  • Verify the bulb is screwed in correctly and is not loose.
  • Replace the bulb with a known working bulb to check if the original bulb is faulty.
  • Check the circuit breaker in your home's electrical panel.
• Flickering Light:
  • Ensure the bulb is screwed in tightly.
  • Try a different bulb.
  • Check for loose connections in the power outlet.
• Lamp is Unstable:
  • Ensure the lamp is placed on a flat, level surface.
  • Verify all assembly components are securely tightened.

7. Specifications

Detailed specifications for the JONATHAN Y JYL2050A Table Lamp:

Image 3: Dimensions of the JYL2050A Table Lamp.

8. Warranty and Support

For warranty information, please refer to the documentation included with your product at the time of purchase or contact JONATHAN Y customer support directly. Keep your proof of purchase for warranty claims.

For further assistance or inquiries, please visit the official JONATHAN Y website or contact their customer service department.