Dragon Touch Vision 3 4K Action Camera User Manual

1. Introduction

The Dragon Touch Vision 3 is a versatile 4K action camera designed to capture your adventures in stunning detail. With its robust waterproof capabilities and a wide array of features, it's perfect for sports enthusiasts and outdoor adventurers. This manual provides essential information for setting up, operating, and maintaining your camera.

Figure 1: Dragon Touch Vision 3 4K Action Camera and accessories.

Key Features:

• 4K Action Camera with 4X Zoom: Professional 4K/30FPS, 2.7K/30fps, 1080P/60FPS video and 20MP photo resolution. Features zoom range from 1.0X to 4.0X.
• 100FT Waterproof Action Camera: Waterproof up to 100ft (30m) with the included waterproof case. Ideal for water sports.
• Wireless Remote Control & Adjustable View Angle: Convenient wrist remote control for easy operation. Adjustable view angle from 70° to 170°.
• Versatile & Compact: Multiple functions including driving mode, image rotation, time-lapse, burst photo, loop recording, slow motion, dramashot, white balance, etc.
• Longer Battery Life & Free Mounting Accessories: Comes with 2 rechargeable 1050mAh batteries and an 18-piece accessories kit.

2. What's in the Box

Your Dragon Touch Vision 3 camera package includes the following items:

Figure 2: Included accessories for the Vision 3 camera.

• Dragon Touch Vision 3 Action Camera
• Waterproof Case
• 2 x Rechargeable 1050mAh Batteries
• 2.4G Wireless Remote Control
• USB Charging Cable
• Various Mounting Accessories (e.g., helmet mounts, bicycle mount, clips, bandages, tethers, adhesive pads)
• User Manual (this document)

3. Camera Overview

Physical Features

Figure 3: Front view of the Vision 3 camera.

• Lens: Captures images and videos.
• Power/Mode Button: Press to power on/off or switch between modes.
• Shutter/OK Button: Press to start/stop recording or take a photo.
• Up/Down Buttons: Navigate menus or adjust settings.
• MicroSD Card Slot: Insert your memory card here.
• USB Port: For charging and data transfer.
• HDMI Port: For connecting to a display.
• Battery Compartment: Houses the rechargeable battery.

4. Setup

4.1. Battery Installation

1. Open the battery compartment cover on the bottom of the camera.
2. Insert the battery, ensuring the correct orientation.
3. Close the battery compartment cover securely.
4. Charge the battery fully before first use using the provided USB cable.

4.2. MicroSD Card Installation

A MicroSD card (not included) is required to store photos and videos. Use a Class 10 or higher MicroSD card up to 64GB.

1. Locate the MicroSD card slot on the side of the camera.
2. Insert the MicroSD card with the gold contacts facing the back of the camera until it clicks into place.
3. To remove, gently push the card until it springs out.

4.3. Using the Waterproof Case

The waterproof case allows your Vision 3 camera to be submerged up to 100ft (30m).

Figure 4: Vision 3 camera in its waterproof case during underwater use.

1. Ensure the camera is clean and dry before placing it inside the case.
2. Close the case firmly, ensuring the latch is fully secured and the rubber seal is free of debris.
3. Before first use underwater, test the empty case for leaks by submerging it for 30 minutes.

5. Operating the Camera

5.1. Power On/Off

• To power on, press and hold the Power/Mode button.
• To power off, press and hold the Power/Mode button again.

5.2. Mode Switching

Press the Power/Mode button repeatedly to cycle through the main modes: Video Recording, Photo, and Playback.

5.3. Recording Video

1. Switch to Video Recording mode. The video icon will appear on the screen.
2. Press the Shutter/OK button to start recording. A red dot will flash on the screen.
3. Press the Shutter/OK button again to stop recording.

5.4. Taking Photos

1. Switch to Photo mode. The camera icon will appear on the screen.
2. Press the Shutter/OK button to take a photo.

5.5. Using the Remote Control

The 2.4G wireless remote allows for convenient control of your camera from a distance.

Figure 5: Remote control in use during an activity.

• Ensure the remote is paired with your camera (refer to the camera's on-screen menu for pairing instructions).
• Press the video button on the remote to start/stop video recording.
• Press the photo button on the remote to take a photo.

5.6. Wi-Fi Connection and App

Connect your Vision 3 camera to your smartphone via Wi-Fi using the XDV app for live preview, control, and file transfer.

Figure 6: Camera connected to a smartphone via Wi-Fi for remote control and sharing.

1. Download and install the XDV app from your smartphone's app store.
2. On the camera, enable Wi-Fi (usually found in the settings menu). The Wi-Fi name and password will be displayed.
3. On your smartphone, connect to the camera's Wi-Fi network using the provided credentials.
4. Open the XDV app to control the camera and access your media.

6. Maintenance

6.1. Battery Care

• Always use original or certified replacement batteries.
• Store batteries in a cool, dry place when not in use.
• Avoid exposing batteries to extreme temperatures.
• If the camera will not be used for an extended period, remove the batteries.

6.2. Cleaning Your Camera

• Use a soft, lint-free cloth to clean the camera body and lens.
• For the lens, use a lens cleaning solution and a microfiber cloth.
• After using the waterproof case in saltwater, rinse it thoroughly with fresh water and let it air dry.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For detailed warranty information and additional support, please refer to the official Dragon Touch website or contact customer service.

An official user manual in PDF format is available for download: Download User Manual (PDF)

Protection plans are also available for extended coverage:

• 2-Year Protection Plan
• 3-Year Protection Plan
• Complete Protect (monthly plan)