Dragon Touch Vision 3 Action Camera User Manual

Your Vision 3

This section provides an overview of the Dragon Touch Vision 3 action camera, identifying its various buttons and ports.

• Shutter / Select Button: Used to take photos or select options.
• Wi-Fi Indicator: Shows the status of the Wi-Fi connection.
• Power / Mode / Exit Button: Used to turn the camera on/off, switch modes, or exit menus.
• Micro USB Port: For charging and data transfer.
• MicroSD Slot: For inserting a microSD card.
• Micro HDMI Port: For connecting to external displays.
• Lens: Captures images and video.
• Screen: Displays camera information and previews.
• Charging Indicator: Shows the charging status of the battery.
• Working Indicator: Indicates the camera is powered on and operational.
• Up Button: Navigates up in menus or adjusts settings.
• Down Button: Navigates down in menus or adjusts settings.
• Speaker: Outputs audio.
• Battery Door: Provides access to the battery compartment.

Note: The camera does not record sound when it is in the waterproof case.

Getting Started

MicroSD Cards

To capture video and photos, a microSD card is required (sold separately). Ensure the card meets these requirements:

• microSD, microSDHC, or microSDXC
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32 format)

Note: Format the microSD card in the camera before first use. Reformatting erases all content, so back up your files first. FAT32 format may cause recording to restart on a new file if a single file exceeds 4GB.

Powering On and Off

• To Power On: Press and hold the Mode button for three seconds.
• To Power Off: Press and hold the Mode button for three seconds.

Switching Modes

• Turn on the camera and press the Mode button to cycle through modes.
• Press the Mode button to exit the current mode.

Turning On / Off Wi-Fi

• To turn on Wi-Fi: Press and hold the Up button, or navigate to Camera Settings.
• To turn off Wi-Fi: Press the Up button.

Overview of Modes

The Vision 3 offers 8 modes:

• Video
• Photo
• Slow Motion
• Playback
• Video Setting
• Photo Setting
• Camera Setting
• General Setting

Video Mode

This is the default mode. Press the OK button to start and stop recording video.