Casio MTP-V002D Analog Watch Instruction Manual

Introduction

Thank you for choosing the Casio MTP-V002D Analog Watch. This manual provides essential information regarding the operation, maintenance, and specifications of your new timepiece. Please read these instructions carefully to ensure proper use and longevity of your watch.

Product Overview

Image: Casio MTP-V002D Analog Watch featuring a black dial, silver-tone hands and markers, a date display at the 3 o'clock position, and a stainless steel case and band.

Key Features:

• Precise Japan Quartz Movement with an accuracy of +/-20 seconds per month.
• Durable Stainless Steel Case and Band with a Triple Fold Clasp.
• Mineral Crystal for enhanced scratch resistance.
• Date Display function.
• Classic 3-Hand Analog timekeeping.
• Water Resistant up to 3 ATM (30 meters).

Setup

Setting the Time:

1. Pull the crown out to the second click position. The second hand will stop.
2. Rotate the crown to move the hour and minute hands to the desired time. When setting the minute hand, advance it four or five minutes past the desired time and then turn it back to the correct time.
3. Push the crown back in to the normal position. The second hand will resume movement.

Setting the Date:

1. Pull the crown out to the first click position.
2. Rotate the crown clockwise to set the date. Ensure the date changes correctly for AM/PM. If the date changes during the day, advance the time by 12 hours.
3. Push the crown back in to the normal position.

Note: Avoid setting the date between 9:00 PM and 1:00 AM, as this may interfere with the automatic date change mechanism.

Operating Guidelines

Water Resistance:

This watch is water resistant up to 3 ATM (30 meters). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. It is not suitable for swimming, showering, or diving. Avoid operating the crown while the watch is wet.

General Care:

• Avoid exposing the watch to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
• Wipe the watch with a soft, dry cloth to remove dirt and moisture.
• Avoid contact with solvents, detergents, perfumes, and cosmetics, as they may damage the case, band, or gaskets.

Maintenance

Battery Replacement:

The watch is powered by 1 Lithium Metal battery (included). When the watch stops or the second hand moves erratically, it indicates that the battery needs replacement. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance.

Cleaning:

For the stainless steel band and case, use a soft cloth lightly dampened with water and a mild soap. Wipe gently, then dry thoroughly with a clean, soft cloth. Do not use abrasive cleaners or harsh chemicals.

Troubleshooting

• Watch has stopped:

  This usually indicates a depleted battery. Refer to the "Battery Replacement" section. If the watch still does not operate after battery replacement, contact customer support.

• Date changes at noon:

  The AM/PM setting is incorrect. Pull the crown out to the second click position and advance the time by 12 hours. Then, reset the time to the current hour.

• Water inside the watch:

  Immediately take the watch to a qualified technician for inspection and repair to prevent further damage.

Specifications

Warranty and Support

For information regarding warranty coverage, service, or additional support, please refer to the warranty card included with your product or visit the official Casio website. Keep your purchase receipt as proof of purchase.

Official Casio Website: www.casio.com