KMC 3-Outlet Wall Mount Surge Protector with 4 USB Charging Ports (Model B0798M639B) User Manual

1. Product Overview

The KMC 3-Outlet Wall Mount Surge Protector (Model B0798M639B) is designed to expand your power options and protect your electronic devices from power surges. It features three standard AC outlets and four USB charging ports, making it ideal for home, office, or school environments. The integrated phone holder cradle adds convenience for charging mobile devices.

Key Features:

• 3 AC Outlets: Provides additional power access for various devices.
• 4 USB Charging Ports: Delivers a combined 4.8 AMP output for charging smartphones, tablets, and other USB-powered devices.
• 900 Joules Surge Protection: Shields connected electronics from damaging voltage spikes.
• Wall-Mountable Design: Plugs directly into a standard wall outlet, saving space and eliminating cable clutter.
• Integrated Phone Holder Cradle: Conveniently holds your phone while it charges.
• ETL Certified: Ensures product safety and quality standards are met.

Image 1.1: Front view of the KMC 3-Outlet Wall Mount Surge Protector, showing the three AC outlets, four USB ports, and 'Protected' and 'Grounded' indicator lights.

2. Safety Instructions

Please read and follow these safety instructions carefully to prevent injury or damage to the product and connected devices.

• Do not exceed the electrical ratings of the surge protector.
• Do not use in wet environments or near water.
• This device is intended for indoor use only.
• Do not disassemble or modify the surge protector.
• Ensure the wall outlet is properly grounded before plugging in the unit.
• Keep children away from the surge protector and connected devices.
• If the surge protector becomes damaged, discontinue use immediately.

3. Setup and Installation

Follow these steps to properly install your KMC Wall Mount Surge Protector.

1. Inspect the Unit: Before installation, ensure the surge protector is free from any visible damage.
2. Choose an Outlet: Select a standard, grounded 3-prong wall outlet. The unit is designed to plug directly into the top outlet of a duplex receptacle, leaving the bottom outlet free.
3. Plug In: Align the prongs of the surge protector with the wall outlet and push firmly until it is securely seated. The unit is designed for a snug fit to ensure stability.
4. Verify Indicator Lights: Once plugged in, the 'Protected' and 'Grounded' indicator lights on the front of the unit should illuminate green, indicating proper operation and surge protection.

Image 3.1: Illustration of the back of the KMC surge protector showing the ground and support pins, along with diagrams of compatible standard and decorative outlets. It also indicates that GFCI and USB outlets require destructive removal of the support pin for compatibility.

Note on Outlet Compatibility: The surge protector is compatible with standard and decorative wall outlets. For GFCI or USB outlets, the lower support pin on the back of the unit may need to be removed. This is a permanent modification and should only be done if necessary and with caution.

4. Operation

Using AC Outlets:

• Plug your electronic devices directly into the three available AC outlets on the front of the surge protector.
• Ensure that the total power draw of all connected devices does not exceed the surge protector's maximum electrical rating.

Using USB Charging Ports:

• Connect your USB-powered devices (e.g., smartphones, tablets) to any of the four USB ports using appropriate charging cables.
• The USB ports provide a combined output of 4.8 AMPs, suitable for charging multiple devices simultaneously. Charging speed may vary depending on the number of devices connected and their individual power requirements.

Image 4.1: Close-up view of the four USB charging ports on the KMC surge protector, labeled with '4.8A 24W Total Output'.

Indicator Lights:

• Protected (Green LED): This light indicates that the surge protection feature is active and your devices are protected from power surges. If this light is off, the surge protection has been compromised, and the unit should be replaced.
• Grounded (Green LED): This light indicates that the wall outlet is properly grounded, which is essential for effective surge protection. If this light is off, the outlet may not be grounded, and an electrician should be consulted.

Image 4.2: The KMC surge protector highlighting the 'Protected' and 'Grounded' indicator lights, which illuminate green when functioning correctly.

Phone Holder Cradle:

• The top edge of the surge protector features a built-in cradle to hold your smartphone or small tablet while it charges via the USB ports.

Image 4.3: The KMC surge protector mounted on a wall outlet, with a smartphone resting in its integrated phone holder cradle.

5. Maintenance

• Cleaning: Disconnect the surge protector from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Replacement: The surge protection components wear out over time and with each surge event. If the 'Protected' indicator light turns off, the surge protection is no longer active, and the unit should be replaced to ensure continued protection for your devices.

6. Troubleshooting

• No Power to Devices:
  • Ensure the surge protector is firmly plugged into a working wall outlet.
  • Check if the 'Protected' and 'Grounded' indicator lights are illuminated green. If not, refer to the 'Indicator Lights' section.
  • Test the wall outlet with another device to confirm it is functional.
• Slow USB Charging:
  • The total output for all USB ports is 4.8 AMPs. Charging multiple devices simultaneously may distribute this power, resulting in slower charging for individual devices.
  • Ensure your charging cable is not damaged and is suitable for your device.
• 'Protected' Light is Off:
  • This indicates that the surge protection components have absorbed a surge and are no longer active. The unit will still provide power, but without surge protection. Replace the unit immediately for continued protection.
• 'Grounded' Light is Off:
  • This indicates that the wall outlet is not properly grounded. Consult a qualified electrician to inspect and correct the wiring of your outlet. The surge protector cannot provide effective protection without a proper ground.

7. Specifications

Image 7.1: Diagram illustrating the approximate dimensions of the KMC 3-Outlet Wall Mount Surge Protector: 5.7 inches in height, 3.7 inches in width, and 1.5 inches in depth.

8. Warranty and Support

Limited Product Warranty:

This KMC product is covered by a 24-month limited product warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or external causes.

Customer Support:

For any questions, technical assistance, or warranty claims, please contact our friendly US-based support team. Refer to the product packaging or the KMC official website for the most current contact information.