Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your hansgrohe Metropol Tub Spout, Model 32542001. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.
Image: The hansgrohe Metropol Tub Spout, Model 32542001, in a chrome finish. This image displays the modern, geometric design of the wall-mounted spout.
Safety Information
- Always turn off the main water supply before beginning any installation or repair work.
- Ensure all local plumbing and building codes are followed during installation.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- If you are unsure about any part of the installation process, consult a qualified professional plumber.
- Do not use harsh chemicals or abrasive cleaners on the product finish, as this may cause damage.
Package Contents
Verify that all components are present before beginning installation:
- hansgrohe Metropol Tub Spout (Model 32542001)
- Mounting Hardware
- Installation Instructions (this manual)
Setup and Installation
The hansgrohe Metropol Tub Spout is designed for wall-mounted installation and requires a concealed cartridge for operation. This tub spout does not include a built-in diverter and must be paired with a shower trim that features a diverter if you intend to switch water flow between the tub spout and a showerhead.
Required Tools (Not Included):
- Adjustable wrench
- Pipe thread sealant or Teflon tape
- Screwdriver (Phillips or flathead, depending on mounting hardware)
- Measuring tape
- Level
Installation Steps:
- Prepare the Installation Area: Ensure the main water supply to the bathroom is turned off. Clear the area around the existing or planned tub spout location.
- Install Concealed Cartridge (if not already present): Follow the manufacturer's instructions for installing your chosen concealed cartridge and rough-in valve. This tub spout connects to the outlet of such a system.
- Prepare the Spout Connection: Apply pipe thread sealant or Teflon tape to the threads of the pipe extending from the wall where the tub spout will connect.
- Attach the Tub Spout: Carefully thread the hansgrohe Metropol Tub Spout onto the prepared pipe connection. Ensure it is level and securely tightened. Do not overtighten, as this can damage the spout or plumbing.
- Secure Mounting Hardware: If additional mounting hardware (e.g., set screws) is provided to secure the spout to the wall, install these according to the included instructions.
- Test for Leaks: Slowly turn the main water supply back on. Check all connections for any signs of leaks. If leaks are detected, turn off the water supply, tighten connections, and re-test.
- Final Inspection: Ensure the spout is firmly mounted and functions correctly.
Operating Instructions
The hansgrohe Metropol Tub Spout functions as a water outlet for your bathtub. Its operation is controlled by the separate concealed cartridge and trim kit installed in your wall.
- Water Flow Activation: To activate water flow from the tub spout, operate the handle or control on your wall-mounted shower trim kit.
- Temperature Control: Water temperature is regulated by the mixing valve within your concealed cartridge, controlled by the associated trim kit.
- AirPower Technology: This tub spout incorporates hansgrohe's AirPower technology, which enriches the water with air. This results in a fuller, softer water stream that splashes less, enhancing your bathing experience.
- Diverter Functionality: As this tub spout does not have a built-in diverter, any switching between the tub spout and a showerhead must be performed using the diverter mechanism on your separate shower trim kit.
Maintenance and Cleaning
Proper care and maintenance will ensure the lasting beauty and performance of your hansgrohe Metropol Tub Spout.
- Regular Cleaning: Clean the tub spout regularly with a soft cloth and a mild, non-abrasive cleaner.
- Avoid Harsh Chemicals: Do not use cleaners containing ammonia, bleach, acids, or abrasives, as these can damage the chrome finish.
- Rinse Thoroughly: After cleaning, rinse the spout thoroughly with clean water and dry it with a soft cloth to prevent water spots.
- Mineral Deposits: For hard water spots or mineral deposits, use a solution of white vinegar and water (50/50) applied with a soft cloth. Allow it to sit for a few minutes, then rinse and dry.
Troubleshooting
If you encounter issues with your tub spout, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow from spout | Partially closed shut-off valves; debris in aerator (if applicable); issues with concealed cartridge. | Ensure shut-off valves are fully open. Check and clean any aerator. Consult the manual for your concealed cartridge for troubleshooting flow issues. |
| Water leaking from base of spout | Loose connection; insufficient pipe thread sealant. | Turn off water supply. Carefully tighten the spout connection. If leaking persists, remove spout, reapply pipe thread sealant, and reinstall. |
| Water not diverting to showerhead | Diverter mechanism on shower trim kit is faulty or not engaged. | This tub spout does not have a diverter. Ensure your shower trim kit's diverter is functioning correctly. Refer to your shower trim kit's manual. |
If these steps do not resolve the issue, please contact hansgrohe customer support or a qualified plumber.
Specifications
| Feature | Specification |
|---|---|
| Brand | hansgrohe |
| Model Name | Metropol Tub Spout |
| Part Number | 32542001 |
| Color | Chrome |
| Material | Brass |
| Mounting Type | Wall Mount |
| Spout Height | 3 Inches |
| Spout Reach | 3 Inches |
| Product Dimensions (D x W x H) | 8.66" x 2.67" x 3.03" |
| Item Weight | 2.48 Pounds |
| Included Components | Tub Spout, Mounting Hardware |
| Special Features | AirPower Technology |
Warranty Information
Hansgrohe, Inc. warrants to the original consumer purchaser that hansgrohe products will be free from defects in material and workmanship for as long as the original consumer purchaser owns both the product and the home in which the product was originally installed. For commercial purchasers, the warranty period is one (1) year from the date of purchase. The warranty period for products in Rubbed Bronze, Matte Black, and Matte White finishes is three (3) years from the date of purchase. This warranty is non-transferable.
This warranty does not cover hansgrohe products purchased from unauthorized sellers, unless otherwise prohibited by law. Authorized sellers can be found on hansgrohe branded websites. Additional warranty restrictions apply. Please refer to the manufacturer's official website for full warranty details and terms.
Customer Support
For further assistance, technical support, or warranty claims, please contact hansgrohe customer service. Contact information can typically be found on the official hansgrohe website or through your local hansgrohe dealer.
