APDTY 24098 Brake Hydraulic Hose Line Retaining Clips User Manual

1. Introduction

This manual provides essential information for the APDTY 24098 Brake Hydraulic Hose Line Retaining Clips. These clips are designed as direct replacements for damaged or rusted original equipment brake line retaining clips, ensuring the secure fastening of brake hydraulic hoses.

Kit Contents:

• 4 x Brake Line Retaining Clips

2. Safety Information

⚠ WARNING: California Proposition 65

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Always ensure the vehicle is properly supported and secured before working on any brake system components. Wear appropriate personal protective equipment, including safety glasses and gloves. If unsure about any procedure, consult a qualified automotive technician.

3. Product Overview

The APDTY 24098 clips are crucial components for maintaining the integrity and safety of your vehicle's brake system. They are specifically designed to secure brake hydraulic hoses in place, preventing movement and potential damage.

Figure 3.1: APDTY 24098 Brake Hydraulic Hose Line Retaining Clips. This image displays the four black metal clips included in the kit, showing their distinct shapes designed for securing brake lines.

These clips feature a 1/2-inch diameter opening, suitable for various brake hose applications. They are constructed from durable steel with a black oxide finish for corrosion resistance.

4. Compatibility

The APDTY 24098 Brake Hydraulic Hose Line Retaining Clips are compatible with select vehicle models from 1979 to 2006. Please verify your specific vehicle's year, make, and model against the compatibility chart in your vehicle's service manual or consult a professional to ensure proper fitment.

Known Compatible Models (Select Years):

• Buick (1982-2005)
• Cadillac (1982-2005)
• Chevrolet (1979-2006)
• Ford (1981-1997)
• GMC (1979-2005)
• Oldsmobile (1982-2004)
• Pontiac (1982-2006)

Replaces OEM Part Numbers:

• 22555667
• N800968-S436

5. Installation

Installation of brake hydraulic hose retaining clips should be performed by individuals with appropriate mechanical knowledge and tools. Incorrect installation can compromise vehicle safety.

1. Preparation: Park the vehicle on a level surface and engage the parking brake. If lifting the vehicle, use appropriate jack stands to secure it.
2. Locate Existing Clips: Identify the brake hydraulic hose retaining clips that need replacement. These are typically found where the brake lines attach to the chassis or suspension components.
3. Remove Old Clips: Carefully remove the old, damaged, or rusted clips. This may require pliers or a flat-head screwdriver. Dispose of old clips responsibly.
4. Clean Mounting Area: Clean any rust or debris from the mounting points where the new clips will be installed.
5. Install New Clips: Position the new APDTY 24098 clips over the brake hydraulic hose and align them with the mounting points. Press firmly until the clips are securely seated. Ensure the brake hose is properly routed and not pinched or stressed.
6. Inspect: After installation, visually inspect the clips to ensure they are fully seated and the brake hose is securely held. Check for any signs of damage to the brake hose during the process.
7. Test Brake System: After any work on the brake system, it is crucial to test the brakes in a safe environment before driving the vehicle.

It is highly recommended to consult your vehicle's specific service manual for detailed instructions and torque specifications related to brake system components.

6. Specifications

7. Warranty and Support

For information regarding warranty coverage, returns, or technical support for your APDTY 24098 Brake Hydraulic Hose Line Retaining Clips, please refer to the seller's policy or contact APDTY directly through their official website or customer service channels.

Always retain your proof of purchase for warranty claims.