EGLO Ceprano Ceiling Light Model 31881 Instruction Manual

1. Introduction

Thank you for choosing the EGLO Ceprano Ceiling Light, Model 31881. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.

Image 1.1: Front view of the EGLO Ceprano Ceiling Light, showcasing its round, white satin glass design with a subtle spiral pattern.

The EGLO Ceprano ceiling light is designed to provide uniform, glare-free illumination, suitable for various indoor environments such as living rooms, bedrooms, kitchens, hallways, and offices. Its modern design integrates seamlessly into diverse interior styles.

Image 1.2: The EGLO Ceprano Ceiling Light installed on a ceiling in a modern room, demonstrating its aesthetic integration and light distribution.

2. Important Safety Instructions

• Electrical Safety: Always disconnect the power supply at the main circuit breaker before installation, maintenance, or bulb replacement to prevent electric shock.
• Qualified Installation: Installation should be performed by a qualified electrician or a competent person in accordance with local electrical codes and regulations.
• Voltage: Ensure the supply voltage matches the fixture's requirements (240 Volts AC).
• Bulb Type: Use only E27 bulbs with a maximum wattage of 25W. Exceeding this wattage can cause overheating and damage to the fixture.
• IP Rating: This fixture has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
• Handling: Handle the glass shade with care to avoid breakage.
• Cleaning: Do not use abrasive cleaners or solvents on the fixture. Refer to the maintenance section for proper cleaning instructions.

3. Package Contents

Please check that all components are present and undamaged before proceeding with installation.

• EGLO Ceprano Ceiling Light Fixture (Model 31881)
• Mounting hardware (screws, wall plugs)
• Instruction Manual

Note: An E27 light bulb is not included and must be purchased separately. The fixture supports E27 bulbs up to a maximum of 25 Watts.

Image 3.1: Visual representation of bulb requirements, indicating that no bulb is included, the socket type is E27, and the maximum supported wattage is 25W.

4. Product Specifications

Image 4.1: Dimensional diagram of the EGLO Ceprano Ceiling Light, illustrating its 24.5 cm diameter.

5. Installation Instructions

WARNING: Risk of electric shock. Ensure power is disconnected at the main circuit breaker before installation.

1. Prepare the Installation Area:
   • Turn off the main power supply to the installation area at the circuit breaker.
   • Ensure the ceiling surface is clean, dry, and structurally sound to support the fixture.
2. Mount the Bracket:
   • Carefully remove the mounting bracket from the light fixture.
   • Position the mounting bracket on the ceiling where the fixture will be installed. Mark the drilling points.
   • Drill holes at the marked points. Insert appropriate wall plugs if necessary.
   • Secure the mounting bracket to the ceiling using the provided screws.
3. Electrical Connection:
   • Connect the household electrical wires to the corresponding terminals on the fixture's wiring block. Typically:
     • Live (L) wire (usually brown or red) to the Live terminal.
     • Neutral (N) wire (usually blue or black) to the Neutral terminal.
     • Earth (E) wire (usually green/yellow) to the Earth terminal.
   • Ensure all connections are secure and properly insulated.
4. Attach the Fixture Body:
   • Carefully align the light fixture body with the mounted bracket.
   • Secure the fixture body to the bracket using the screws or clips provided.
5. Install the Bulb:
   • Insert an E27 bulb (max 25W) into the socket. Do not overtighten.
6. Attach the Glass Shade:
   • Carefully place the glass shade onto the fixture body.
   • Secure the glass shade using the retaining clips or screws as designed. Ensure it is firmly in place.
7. Restore Power:
   • Once installation is complete and all components are secure, restore power at the main circuit breaker.
   • Test the light fixture using the wall switch.

6. Operation

The EGLO Ceprano Ceiling Light is operated via a standard wall switch connected to its electrical circuit. There are no integrated switches on the fixture itself.

6.1 Turning On/Off

Simply toggle the connected wall switch to turn the light fixture on or off.

6.2 Bulb Replacement

WARNING: Always disconnect power at the main circuit breaker before replacing the bulb.

1. Turn off the power supply to the fixture at the main circuit breaker.
2. Allow the bulb to cool down completely if it has been recently in use.
3. Carefully remove the glass shade by releasing its retaining clips or screws.
4. Unscrew the old E27 bulb counter-clockwise.
5. Screw in a new E27 bulb (max 25W) clockwise until snug. Do not overtighten.
6. Reattach the glass shade, ensuring it is securely fastened.
7. Restore power at the main circuit breaker and test the light.

7. Maintenance and Care

WARNING: Disconnect power before cleaning or performing any maintenance.

7.1 Cleaning

• Ensure the fixture is cool and power is disconnected.
• Wipe the metal parts with a soft, dry cloth.
• For the glass shade, use a soft, damp cloth with a mild, non-abrasive cleaner if necessary. Dry immediately with a clean, soft cloth to prevent water spots.
• Do not use harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.

7.2 General Care

• Regularly check for any loose connections or damaged wiring. If any issues are found, consult a qualified electrician.
• Do not hang anything from the fixture or subject it to excessive weight.

8. Troubleshooting

If you experience issues with your EGLO Ceprano Ceiling Light, please refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact EGLO customer support or a qualified electrician.

9. Warranty Information

EGLO products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your region, please refer to the warranty card included with your purchase or visit the official EGLO website. The warranty typically covers manufacturing defects under normal use and service.

Please retain your proof of purchase for any warranty claims.

10. Customer Support

For further assistance, technical support, or inquiries regarding your EGLO Ceprano Ceiling Light, please contact EGLO customer service through their official website or the contact information provided on your product packaging.

EGLO Official Website: www.eglo.com