Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Kwikset Avalon Handleset, Model 98150-001. This non-locking entry handleset is designed for exterior front doors and features a Venetian Bronze finish. Please read all instructions carefully before beginning installation or operation to ensure proper function and longevity of your product.
Product Overview
The Kwikset Avalon Handleset combines a stylish exterior handle with an interior reversible lever. It is intended for use on exterior doors where a separate deadbolt (sold separately) provides locking security. The product features Microban Protection, which helps keep the surface 99.9% cleaner than an unprotected surface.
Image: The Kwikset Avalon Handleset in Venetian Bronze, installed on a door. Note that the keypad deadbolt shown above the handleset is sold separately and not included with this product.
Key Features:
- Handleset and Interior Lever: Designed for exterior front doors, to be combined with a Kwikset electronic or mechanical deadbolt (sold separately) for security.
- Easy Installation: Can be installed in minutes using only a screwdriver. A drill may be required if the door lacks a bottom handleset support hole.
- Standard Door Fit: Accommodates standard door thicknesses from 1-3/8" to 1-3/4".
- Adjustable Latch Backset: Features an adjustable latch backset from 2-3/8" to 2-3/4" for versatile installation.
- Microban Protection: The hardware is treated with Microban, providing enhanced surface cleanliness.
- Traditional Design: Classic style with unique details in a Venetian Bronze finish.
Setup and Installation
The Kwikset Avalon Handleset is designed for straightforward installation. Ensure you have a Phillips head screwdriver. If your door does not have a pre-drilled bottom support hole for the handleset, a drill will be necessary. Refer to the detailed installation guide included in the product packaging for specific drilling templates and instructions.
Image: A person using a screwdriver to install a Kwikset door handle, demonstrating the ease of installation.
Door Preparation:
- Verify your door thickness is between 1-3/8" and 1-3/4".
- Adjust the latch backset to either 2-3/8" or 2-3/4" by twisting the latch mechanism as needed.
- Ensure all necessary holes are drilled according to the provided template.
Image: A diagram illustrating how to measure door thickness and adjust the latch backset for proper fit.
Reversible Handing:
The interior lever is reversible, allowing it to be installed on both left-handed and right-handed doors. Follow the instructions in the installation guide to correctly orient the lever for your specific door configuration.
Image: Illustration showing the reversible nature of the interior lever for both left and right-handed door installations.
Operation
The Kwikset Avalon Handleset is designed for easy entry and exit. To open the door from the exterior, depress the thumb piece on the handleset. From the interior, simply depress the lever handle. This handleset does not provide locking functionality on its own; it must be paired with a separate deadbolt for security.
Image: Exterior view of the Avalon Handleset, showing the thumb piece for operation.
Image: Interior view of the Tustin Lever, which operates the latch from inside.
Maintenance
To maintain the appearance and functionality of your Kwikset Avalon Handleset, follow these simple maintenance guidelines:
- Cleaning: Clean the handleset regularly with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and the Microban protection.
- Lubrication: Periodically apply a silicone-based lubricant to the latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dirt and debris.
- Inspection: Routinely check all screws and fasteners to ensure they are tight. Loose components can affect performance and security.
Troubleshooting
If you encounter issues with your Kwikset Avalon Handleset, consider the following common solutions:
- Handle Sticking or Difficult to Operate:
- Check for any obstructions around the latch or strike plate.
- Apply a silicone-based lubricant to the latch mechanism.
- Ensure all mounting screws are properly tightened, but not overtightened.
- Loose Handleset:
- Tighten all visible screws on both the interior and exterior components of the handleset.
- Latch Not Engaging Properly:
- Verify that the strike plate on the door frame is correctly aligned with the latch bolt. Adjust the strike plate if necessary.
- Confirm the latch backset was correctly set during installation (2-3/8" or 2-3/4").
If these steps do not resolve the issue, please contact Kwikset customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 98150-001 |
| Brand | Kwikset |
| Material | Metal (Bronze) |
| Color/Finish | Venetian Bronze |
| Product Dimensions | 7.39"L x 3.99"W |
| Item Weight | 4.74 Pounds |
| Door Thickness Compatibility | 1-3/8" to 1-3/4" |
| Adjustable Latch Backset | 2-3/8" to 2-3/4" |
| Lock Type | Lever (Non-locking) |
| Hand Orientation | Ambidextrous (Reversible) |
| Special Feature | Microban Protection, Easy to Install |
Warranty and Support
Your Kwikset Avalon Handleset is backed by a Lifetime Mechanical and Finish Warranty. This warranty covers defects in material and workmanship for the lifetime of the original residential user. For specific details regarding warranty coverage and claims, please refer to the warranty information provided with your product or visit the official Kwikset website.
Customer Support:
For technical assistance, troubleshooting, or warranty inquiries, please contact Kwikset Customer Service. Contact information can typically be found on the Kwikset website or in the product packaging.
