1. Introduction
Thank you for choosing the Zadro LEDVPRT Dimmable Touch LED Lighted Makeup Mirror. This mirror is designed to provide optimal illumination and magnification for your beauty and grooming needs. It features dual-sided optical quality glass with 1X and 5X magnification, energy-saving LED lighting, and intuitive touch controls for power and dimming.
This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new mirror. Please read it thoroughly before use and retain it for future reference.
Figure 1: Zadro LEDVPRT Dimmable Touch LED Lighted Makeup Mirror.
2. Safety Information
- Water Exposure: This product is not waterproof. To prevent electric shock or damage, keep the mirror away from direct water exposure and do not immerse it in water.
- Power Source: Use only the provided AC adapter. Ensure the voltage matches your power supply.
- Placement: Place the mirror on a stable, flat surface to prevent it from tipping over.
- Children: Keep out of reach of children.
- Magnification Warning: Magnified mirrors can concentrate sunlight, potentially causing fire. Do not leave the mirror in direct sunlight.
- Damaged Cord: Do not operate the mirror if the cord or plug is damaged. Contact customer support for assistance.
3. Package Contents
Verify that all items are present in the package:
- Zadro LEDVPRT Dimmable Touch LED Lighted Makeup Mirror
- AC Power Adapter
4. Setup
- Unpack: Carefully remove all components from the packaging.
- Placement: Position the mirror on a firm, level surface such as a countertop or vanity. Ensure there is adequate space around the mirror for rotation and use.
- Connect Power: Insert the small end of the AC power adapter into the power port located on the back or base of the mirror. Plug the other end of the adapter into a standard electrical outlet.
5. Operating Instructions
5.1 Power On/Off
To turn the LED lights on or off, simply tap the pedestal base of the mirror. The touch controls are designed to work exclusively on the base; touching the mirror glass, bezel, or neck/stem will not activate the controls.
Figure 2: Tapping the base to power on/off.
5.2 Dimmable Lighting Control
To adjust the brightness of the LED lights, press and hold your finger on the pedestal base. Slide your finger across the base to effortlessly dim or brighten the illumination to your desired level. The mirror features a memory setting, so when you turn it off, it will recall and return to the last brightness setting used upon the next power-on.
Figure 3: Smart Dimmer Control on the mirror base.
5.3 Magnification and Rotation
The mirror features dual-sided optical quality glass. One side provides 1X magnification for general viewing, hairstyling, and overall cosmetic application. The reverse side offers 5X magnification, ideal for detailed tasks such as makeup application, tweezing, or close-up grooming.
To switch between magnifications, simply rotate the mirror head 360 degrees. The mirror head is designed to rotate smoothly to provide the desired view.
Figure 4: Dual magnification and 360-degree rotation.
5.4 Optimal Viewing Distance for Magnification
When using the 5X magnified side, it is important to note that objects in the mirror will appear closer than they are. For a clear, undistorted image, maintain an optimal viewing distance of approximately 4-6 inches from the magnified surface. If you are too far away, the image may appear distorted or inverted. This is a normal characteristic of strong magnification and not a product defect. Prolonged use at an incorrect distance may cause temporary disorientation or nausea for some users.
6. Maintenance and Care
- Cleaning: To clean the mirror surface, use a soft, damp cloth. For the mirror frame and base, wipe with a soft, dry cloth. Do not use abrasive cleaners, chemical sprays, or harsh detergents, as these can damage the finish or electronic components.
- Water Exposure: As stated in the safety information, avoid direct water exposure. Do not rinse the mirror under running water.
- Storage: When not in use, store the mirror in a dry, safe place away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on. | Mirror not plugged in; power outlet not active; incorrect touch area. | Ensure the AC adapter is securely plugged into both the mirror and a working electrical outlet. Tap the pedestal base firmly. |
| LED lights do not dim. | Incorrect touch action; touch area not recognized. | Press and hold your finger on the pedestal base, then slide it to adjust brightness. Ensure your finger is in full contact with the base. |
| Image appears distorted or upside down on magnified side. | Viewing distance is too far from the magnified mirror. | Move closer to the 5X magnified mirror, maintaining an optimal viewing distance of approximately 4-6 inches for a clear image. This is a normal characteristic of high magnification. |
8. Specifications
Figure 5: Product Dimensions.
| Feature | Detail |
|---|---|
| Brand | Zadro |
| Model Number | LEDVPRT |
| Product Dimensions | 17"L x 11"W (Overall), 7" diameter reflective surface |
| Magnification | 5X / 1X (Dual-sided) |
| Lighting | Dimmable LED Ring Light (Soft-white color) |
| Control Type | ON/OFF & Dimming Touch Control Base |
| Rotation | 360-degree rotating head |
| Mounting Type | Countertop |
| Material | Metal (Stainless Steel Frame) |
| Finish Type | Polished (Chrome) |
| Item Weight | 3.5 pounds (1588 Grams) |
| Power Source | AC Adapter (Included) |
9. Warranty and Support
For warranty information or technical support, please contact Zadro customer service directly. Refer to the product packaging or the official Zadro website for the most current contact details.
