Zodiac Jandy AquaPalm Wireless Remote

1. Introduction

The Zodiac Jandy AquaPalm Wireless Remote (Model R0687300) provides convenient control and programming capabilities for your pool and spa system. Designed for ease of use, this water-resistant handheld remote allows you to manage various pool/spa features and auxiliary functions from anywhere in your backyard.

Key features include:

• Rubberized material for enhanced grip and durability.
• User-friendly interface for intuitive operation.
• Easy-to-read backlit display and buttons for visibility in various lighting conditions.
• Dedicated 'Hot Keys' for quick access to up to two frequently used devices without navigating menus.
• Extended battery life, operating for months on two AA batteries.

2. Setup

2.1 Battery Installation

1. Locate the battery compartment cover on the back of the remote.
2. Using a small Phillips head screwdriver, loosen the screw(s) securing the battery cover.
3. Remove the cover.
4. Insert two (2) AA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
5. Replace the battery cover and tighten the screw(s) to secure it.

2.2 Initial Pairing/Synchronization

To ensure proper communication with your AquaLink system, the remote must be paired. Refer to your AquaLink system's main control panel manual for specific pairing instructions. Generally, the process involves:

1. Ensure your AquaLink main control panel is powered on.
2. Access the 'Pairing' or 'Add Device' menu on your AquaLink main control panel.
3. Follow the on-screen prompts on the main control panel and the AquaPalm remote to complete the synchronization process.
4. A confirmation message will typically appear on both devices once pairing is successful.

Figure 1: Front view of the AquaPalm Wireless Remote, showing the display, navigation buttons (back, up, down, select), power button, and hot keys (1, 2).

3. Operating the Remote

3.1 Powering On/Off

Press and hold the Power button (typically marked with a circle and vertical line) located on the right side of the remote to turn the device on or off.

3.2 Navigation

• Use the Up and Down arrow buttons to scroll through menu options on the display.
• Press the Select button (center button) to confirm a selection or enter a submenu.
• Press the Back button (left button) to return to the previous menu or screen.

3.3 Controlling Pool/Spa Features

Once paired, the remote will display available functions from your AquaLink system. Navigate through the menus to control:

• Pool Pump operation
• Pool Heater settings
• Spa Jets activation
• Pool Lighting (on/off, color changes if applicable)
• Other auxiliary devices connected to your AquaLink system.

3.4 Using Hot Keys

The '1' and '2' buttons are programmable hot keys. These can be configured through your AquaLink system's main control panel to instantly activate specific functions or devices without navigating through the full menu. Consult your AquaLink system manual for instructions on programming these hot keys.

4. Maintenance

4.1 Cleaning

The AquaPalm remote features a water-resistant housing. To clean, wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components. Ensure the battery compartment is securely closed before cleaning.

4.2 Battery Replacement

When the battery indicator on the display shows low power, replace the two AA batteries following the instructions in Section 2.1. Always use fresh, high-quality alkaline batteries for optimal performance and to prevent leakage.

4.3 Storage

When not in use for extended periods, store the remote in a cool, dry place away from direct sunlight and extreme temperatures. If storing for several months, it is recommended to remove the batteries to prevent potential leakage and damage to the device.

5. Troubleshooting

• Remote Not Responding:
  Check the batteries. Replace them if they are low or depleted. Ensure the remote is within range of your AquaLink system's receiver. Re-attempt the pairing process (Section 2.2) if communication issues persist.
• Display Not Working:
  Ensure the remote is powered on. Check battery levels. If the display remains blank or unreadable after checking batteries, contact customer support.
• Buttons Not Functioning:
  Ensure the remote is powered on. If specific buttons are unresponsive, there may be debris or internal damage. Avoid attempting to repair the device yourself.
• Intermittent Connection:
  This could be due to interference from other wireless devices or being at the edge of the operating range. Try moving closer to the AquaLink system's main control panel.

6. Specifications

Figure 2: Back view of the AquaPalm Wireless Remote, illustrating the battery compartment cover and regulatory information.

7. Warranty Information

Specific warranty terms and conditions for the Zodiac Jandy AquaPalm Wireless Remote (Model R0687300) are provided by the manufacturer at the time of purchase. Please refer to the warranty card included with your product or visit the official Zodiac website for detailed information regarding warranty coverage, duration, and claims procedures. Keep your proof of purchase for warranty validation.

8. Support

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Zodiac customer support. You can typically find contact information on the official Zodiac website or through your authorized dealer.

Online Resources: www.zodiac.com