Product Overview
The HATHASPACE HSP001 True HEPA Air Purifier is designed to provide clean and healthy air in your home. It features a comprehensive 4-in-1 filter system that effectively targets a wide range of airborne pollutants.
Key Features:
- SMART FILTER FOR BEDROOM: Our 4-in-1 filter system targets pollen, dust, pet dander, VOC’s, smoke, and odors - the H11 HEPA filter captures 99.9% of particles down to 0.3 microns. Our lightweight device is portable, allowing you to improve air quality wherever you need it. Our smart air quality sensor & touch-screen display makes the purifier easy to use & adjust your settings, & also shows air quality information.
- EXCEPTIONALLY SILENT: Designed for quiet operation, making it perfect for use in bedrooms and living rooms. The purifier's efficiency in capturing dust and particles - see just how much our air purifiers for home can assist and support the body’s natural response.
- REMOVE ODORS, SMOKE, & VOC'S: Both an air cleaner & odor eliminator, our air purifier features a unique honeycomb activated-carbon filter that absorbs odors, smoke, and VOC’s. With a state-of-the-art fan and motor, enjoy clean air delivered quietly and efficiently in your home, bedroom, office, kitchen, basement, dorm, apartment, or living room.
Setup and First Use
Before operating your HATHASPACE air purifier, ensure all packaging materials are removed, especially from the filters.
Unboxing and Filter Installation:
- Carefully remove the air purifier from its packaging.
- Locate the front panel of the unit. Gently pull it off to access the filter compartment.
- Remove the filters from their sealed plastic bags. It is crucial to remove all plastic packaging from the filters before use.
- Insert the filters back into the unit, ensuring they are correctly oriented. The H11 HEPA filter and activated carbon filter should fit snugly.
- Reattach the front panel securely.
- Place the air purifier on a flat, stable surface in your desired location. Ensure there is adequate space around the unit for proper airflow.
- Plug the power cord into a suitable electrical outlet.
Operating Instructions
The HATHASPACE air purifier features a user-friendly touch-screen display and can also be controlled via the included remote.
Control Panel Functions:
- Power Button: Press to turn the unit ON or OFF.
- Air Quality Sensor & Display: The display shows the current air quality level. It uses a color-coded system (Green for good, Yellow for moderate, Red for poor) and a numerical value to indicate air purity. The unit automatically adjusts fan speed based on detected air quality in Auto mode.
- Fan Speed: Adjust the fan speed (low, medium, high) to suit your preference. Higher speeds provide faster purification.
- Timer: Set the purifier to operate for a specific duration (e.g., 1, 2, 4, 8 hours) before automatically turning off.
- Sleep Mode: Activates a whisper-quiet operation and turns off all display lights for undisturbed sleep.
- Light Button: Toggles the display lights ON or OFF.
- Ionizer/Anion Feature: This feature should only be used in unoccupied spaces. Clear the room of humans and animals and wait 30 minutes after completion before re-entry. Using it in an occupied space can cause irritation and injury.
Maintenance
Regular maintenance of your air purifier's filters is essential for optimal performance and longevity.
Filter Replacement and Cleaning:
- The filters should be replaced every 3-4 months, depending on usage and air quality.
- To extend filter life, you can vacuum the pre-filter and HEPA filter a few times before needing a full replacement.
- To access filters, gently pull off the front panel.
- Remove the used filters by pulling on the tabs.
- Vacuum any accumulated dust and debris from the filters.
- Insert new filters (if replacing) or reinsert cleaned filters, ensuring correct orientation.
- Reattach the front panel.
Replacement filters can be found on the HATHASPACE website or through authorized retailers to ensure continuous fresh air.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | Power cord not properly plugged in; filters still in plastic packaging. | Ensure power cord is securely plugged in. Remove all plastic packaging from filters before installation. |
| Air quality monitor shows consistent low readings (e.g., 7-9) or doesn't react to common pollutants. | Sensor calibration or specific pollutant detection limitations. | While the sensor is highly effective for VOCs and smoke, its sensitivity to pollen, pet dander, or general dust might vary. Ensure the unit is running on an appropriate fan speed for continuous circulation. |
| Reduced airflow or increased noise. | Clogged filters. | Clean or replace filters as per maintenance instructions. |
Specifications
- Model Number: HSP001
- Brand: HATHASPACE
- Product Dimensions: 8.9"D x 8.9"W x 22.2"H
- Weight: 12 Pounds
- Noise Level: 43 dB
- Particle Retention Size: 0.30 microns (H11 HEPA filter)
- Coverage Area: Up to 700 Sq. Ft.
- Color: White
- Manufacturer: Hathaspace
- Country of Origin: China
Warranty and Support
Your HATHASPACE air purifier comes with a 2-year warranty, ensuring peace of mind with your purchase.
Award-winning customer support is available 7 days a week to assist with any questions or concerns.
For additional information or to download the official user manual, please visit the User Manual (PDF).
