Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Jandy Pro Series PSB220 Pool and Spa Air Blower. The PSB220 is designed to provide powerful and quiet aeration for your pool or spa, enhancing your aquatic experience. Please read this manual thoroughly before attempting any installation or operation.
Safety Information
WARNING: Risk of Electric Shock or Electrocution.
- All electrical wiring must be performed by a qualified electrician and conform to all local and national electrical codes.
- Ensure the power supply is disconnected at the circuit breaker before performing any service or maintenance.
- This blower is equipped with a thermally protected motor which automatically shuts off under excessive operating heat. Allow 30 minutes for blower cooling and restart.
- Only use copper conductors for wiring connections.
- Do not operate the blower if it has been submerged in water.
- Keep hands, hair, and loose clothing away from moving parts.
Product Features
- Ultra Quiet Operation: Engineered for a more peaceful backyard experience.
- Powerful Performance: Features a 2.0 HP motor for effective aeration.
- Voltage: Operates on 240 volts.
- Water Damage Prevention: Built-in check valves prevent water from damaging the blower motor.
- Easy Installation: Designed for easy bottom mount installation with an included wall bracket.
- Indoor/Outdoor Use: Suitable for both indoor and outdoor installations.
Setup and Installation
Proper installation is crucial for the performance and longevity of your Jandy PSB220 blower. It is recommended that installation be performed by a licensed professional to ensure compliance with all safety standards and to maintain product warranty.
- Mounting Location: Select a suitable location for the blower. The unit is designed for bottom mount installation and includes a wall bracket for secure attachment. Ensure the location allows for proper ventilation and access for maintenance.
- Secure Mounting: Use the provided wall bracket to securely fasten the blower to a stable surface. The bottom of the unit is marked "FASTEN HERE" to indicate the mounting point.
- Electrical Connection: Connect the blower to a 240V power supply. Ensure all wiring is done with copper conductors and adheres to local electrical codes. The internal wiring connections are accessible for professional installation.
- Plumbing Connection: Connect the blower to your pool or spa's air line. The built-in check valves will prevent water from entering the motor.
- Final Check: Before restoring power, double-check all connections to ensure they are secure and correctly installed.
Figure 1: Bottom view of the Jandy PSB220 blower, highlighting the "FASTEN HERE" marking for secure installation.
Figure 2: View of the internal wiring compartment of the Jandy PSB220 blower, showing blue and green wires for electrical connection.
Figure 3: Front view of the Jandy PSB220 Pro Series Pool and Spa Air Blower, showing the product label.
Figure 4: Side view of the Jandy PSB220 Pro Series Pool and Spa Air Blower, illustrating its compact design.
Figure 5: Close-up of the Jandy PSB220 product label, displaying model number, serial number, peak HP, voltage, and amperage.
Operating Instructions
The Jandy PSB220 blower is designed for straightforward operation once properly installed.
- Power On: Restore power to the blower at the circuit breaker.
- Activation: The blower can be activated via your pool/spa control system or a dedicated switch, depending on your setup.
- Aeration: The blower will begin to push air into your pool or spa, creating bubbles and enhancing water circulation. This can be particularly useful for cooling down pool water in hot climates.
- Thermal Protection: In case of excessive heat, the motor's thermal protection will activate, shutting off the unit. If this occurs, allow the blower to cool for at least 30 minutes before attempting to restart it.
Maintenance
The Jandy PSB220 is designed for minimal maintenance. Regular checks can help ensure its longevity and optimal performance.
- Keep Clear: Ensure the area around the blower is free from debris, leaves, and other obstructions that could impede airflow or cause overheating.
- Inspect Wiring: Periodically check electrical connections for any signs of wear, corrosion, or looseness. Ensure power is off before inspection.
- Clean Exterior: Wipe down the exterior of the blower with a damp cloth to remove dirt and dust. Do not use harsh chemicals or abrasive cleaners.
- Listen for Unusual Noises: If you notice any unusual noises or vibrations during operation, disconnect power and consult a qualified technician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blower does not start. | No power supply; tripped circuit breaker; thermal overload activated. | Check power connection and circuit breaker. If thermal overload, allow 30 minutes for cooling. |
| Reduced airflow. | Obstruction in air intake/output; damaged impeller. | Clear any obstructions. If problem persists, contact support. |
| Unusual noise or vibration. | Loose mounting; internal component issue. | Ensure blower is securely mounted. Disconnect power and contact a qualified technician if noise continues. |
| Blower frequently shuts off. | Overheating due to poor ventilation or continuous operation; thermal overload. | Ensure adequate ventilation around the unit. Allow cooling periods if operating for extended durations. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Jandy |
| Model Number | PSB220 |
| Horsepower (HP) | 2.0 HP |
| Voltage | 240 Volts |
| Power Source | Corded Electric |
| Item Weight | 5 Pounds |
| Color | Black |
| Specific Uses | Inground Pools & Spas |
| UPC | 052337070904 |
Warranty Information
Jandy products are manufactured to high standards and come with a limited warranty. Please note that for the warranty to be valid, installation of the PSB220 blower must be performed by a licensed professional. Self-installation may void the manufacturer's warranty. Refer to the official Jandy warranty documentation for complete terms and conditions.
Support
For technical assistance, replacement parts, or warranty claims, please contact Jandy customer support or visit their official website:
- Website: www.jandy.com
- Phone: 1-800-822-7933
- Address: Zodiac Pool Systems, Inc., 2620 Commerce Way, Vista, CA 92081
