1. Introduction
The Brook Super Converter is a versatile adapter designed to enhance your gaming experience by allowing you to use modern game controllers with classic consoles and PC. This device bridges the gap between contemporary controllers like Switch Pro, Xbox One, PS3, PS4, and PS5 gamepads/joysticks and older systems such as PlayStation 1, PlayStation 2, PlayStation Classic, and PC (X-Input).
This manual provides comprehensive instructions for setting up, operating, and maintaining your Brook Super Converter, ensuring optimal performance and compatibility.
2. Product Overview
The Brook Super Converter is a compact, USB-sized device that offers a seamless connection between your preferred modern controller and legacy gaming systems. It features automatic controller registration, optimal button mapping, and vibration support, providing a familiar and responsive gaming experience.
Figure 1: Brook Super Converter device with PS2 and XID switch.
Figure 2: Brook Super Converter with PC and P3/P4 USB ports.
3. Package Contents
- 1 x Brook Super Converter
- 1 x 27cm Split Line Cable
- 1 x Gam3Gear Keychain (promotional item, not essential for function)
Figure 3: The 27cm Split Line Cable for controller connection.
4. Setup Instructions
- Connect the Converter: Plug the Brook Super Converter into the controller port of your PlayStation 1, PlayStation 2, or PlayStation Classic console. For PC use, connect it to a USB port.
- Connect Your Controller:
- Wired Connection: Connect your compatible controller (e.g., PS3, PS4, Switch Pro, Xbox One) to the USB port on the Brook Super Converter using a USB cable.
- Wireless Connection (PS4/PS5/WiiU Pro/Switch Pro only): For initial setup, connect your PS4 or PS5 controller to the adapter via USB cable to register it. Once registered, it should connect automatically for wireless use.
- Mode Selection: Ensure the switch on the converter is set to the correct mode (PS2 for PlayStation consoles, XID for PC).
- Power On: Turn on your console or PC. The converter's LED indicator will show its status.
Figure 4: Connection diagram for various controllers and consoles.
5. Operating Instructions
5.1. Default Button Configuration
The Brook Super Converter automatically maps buttons for optimal compatibility. Refer to the table below for the default button assignments:
Figure 5: Default button configuration across different platforms.
5.2. Button Remapping
You can customize button assignments on your controller using the remapping function.
Remap Setting for PS4 Controller:
Video 1: Instructions on how to remap buttons on a PS4 controller using the Brook Super Converter.
Cancel Remap Setting for PS4 Controller:
Video 2: Instructions on how to cancel button remapping on a PS4 controller.
Remap Setting for PS3 Controller:
Video 3: Instructions on how to remap buttons on a PS3 controller using the Brook Super Converter.
Cancel Remap Setting for PS3 Controller:
Video 4: Instructions on how to cancel button remapping on a PS3 controller.
5.3. Turbo Setting
Activate turbo functions for rapid button presses.
Turbo Setting for PS4 Controller:
Video 5: Instructions on how to set up turbo function on a PS4 controller.
Cancel Turbo Setting for PS4 Controller:
Video 6: Instructions on how to cancel turbo function on a PS4 controller.
Cancel Turbo Setting for PS3 Controller:
Video 7: Instructions on how to cancel turbo function on a PS3 controller.
6. Compatibility
The Brook Super Converter is compatible with a wide range of controllers and consoles:
- Compatible Controllers: Switch Pro, Xbox One (wireless use only), PS3, PS4, PS5 gamepads and joysticks.
- Compatible Consoles: PlayStation 2, PlayStation 1, PlayStation Classic, and PC (X-Input).
- Features Supported: Auto-register controllers, optimal button mapping, vibration support, hot swapping.
Important Note:
- Each Brook Super Converter can only handle one controller at a time.
- PS3/PS4 controllers must be connected with a USB cable for first-time registration.
- Wireless use is compatible with PS4 / PS5 / WiiU Pro / Switch Pro controllers.
- Does NOT support headset/headphone functionality.
- NOT compatible with Qanba Q2.
- Please check the compatibility list on the official Brook website before purchase, as not all brands or models of controllers/wheels/joysticks are guaranteed to be compatible.
7. Firmware Updates
To ensure the best performance and compatibility with new controllers or system updates, it is recommended to regularly check for and install the latest firmware for your Brook Super Converter. Firmware updates can typically be found on the official Brook website. Please update to the latest firmware for PS Classic compatibility.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Brook |
| Model Number | SHELF A20 |
| Item Weight | 3.52 ounces |
| Package Dimensions | 7.01 x 3.31 x 1.89 inches |
| Color | Black |
| Connector Type | USB Type B |
| Number of Ports | 1 |
| Power Plug Type | No Plug |
| GTIN / UPC | 781055983851 |
9. Troubleshooting
- Controller Not Connecting: Ensure the converter is firmly plugged into the console/PC. For wireless controllers, confirm initial USB registration has been completed. Check the converter's mode switch (PS2/XID).
- No Vibration: Verify that the game supports vibration and that the feature is enabled in the game or console settings. Ensure your controller model supports vibration.
- Input Lag/Dropped Inputs: Ensure your controller's battery is charged if using wirelessly. Try a different USB cable for wired connections. Update the converter's firmware to the latest version.
- Incompatible Controller: Refer to the official Brook website for an updated list of compatible controllers. Not all third-party controllers are guaranteed to work.
- No Headset/Headphone Support: This adapter does not support headset or headphone functionality.
10. Warranty and Support
For warranty information, technical support, or further assistance, please visit the official Brook website or contact their customer service directly. Keep your proof of purchase for any warranty claims.