Rev-A-Shelf 33-inch Polymer Two-Tier Half Moon Susans Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Rev-A-Shelf 33-inch Polymer Two-Tier Half Moon Susans. This product is designed to optimize storage and accessibility within blind corner cabinets, enhancing kitchen organization.

Please read these instructions thoroughly before beginning installation to ensure proper setup and safe operation. Keep this manual for future reference.

Product Overview

The Rev-A-Shelf Two-Tier Half Moon Susans system consists of two almond-colored polymer shelves and a central pivot hardware assembly. It is specifically designed for blind corner cabinets, allowing the shelves to pivot in and out for easy access to stored items.

Key Features:

• Two Almond Polymer Half-Moon Shelves: Durable injection-molded plastic construction.
• Pivot Hardware: Enables smooth rotation and access within blind corner cabinets.
• Blind Corner Cabinet Compatibility: Designed for cabinets with a 16-1/8 inch opening, suitable for both blind left and blind right installations.
• Dimensions: Approximately 18.35 inches deep x 33 inches wide x 15.94 inches high.

Components Included:

• (2) Almond Polymer Half-Moon Shelves
• Pivot Hardware Assembly (includes central pole, mounting brackets, and fasteners)

Note: Drawer slides are not included and are not required for this pivoting unit.

Image: The Rev-A-Shelf 33-inch Polymer Two-Tier Half Moon Susans, featuring two almond-colored half-moon shelves connected by a central metal pole.

Image: Detailed view of the pivot hardware components, including the central pole, upper and lower mounting brackets, and various fasteners required for installation.

Setup and Installation

Proper installation is crucial for the functionality and longevity of your Half Moon Susans. Follow these steps carefully.

Tools Required:

• Measuring Tape
• Pencil
• Drill with appropriate drill bits
• Screwdriver (Phillips head)
• Level
• Safety Glasses

Installation Steps:

Refer to the provided instruction sheet for detailed diagrams and measurements. The general steps are outlined below:

Image: A black and white diagram illustrating the installation process for the Rev-A-Shelf Half Moon Lazy Susan, showing measurements and component placement within a blind corner cabinet.

1. Prepare the Cabinet: Ensure your blind corner cabinet has a minimum opening of 16-1/8 inches. Clear the cabinet of any obstructions.
2. Install Lower Mounting Bracket: Position the lower pivot bracket on the cabinet floor according to the instruction sheet's measurements. Mark and pre-drill holes, then secure the bracket with the provided screws. Ensure it is level and correctly oriented for either a blind left or blind right configuration.
3. Install Upper Mounting Bracket: Measure and mark the position for the upper pivot bracket on the cabinet ceiling. This bracket will support the top of the central pole. Pre-drill holes and secure it firmly.
4. Assemble the Pole and Shelves: Insert the central metal pole into the lower pivot bracket. Slide the two half-moon shelves onto the pole, ensuring they are oriented correctly. Adjust the height of each shelf as desired, typically with enough clearance for items on the lower shelf. Secure the shelves to the pole using the provided clips or set screws.
5. Secure the Pole: Insert the top of the central pole into the upper pivot bracket. Ensure the entire assembly is stable and the pole is vertical.
6. Test Operation: Gently pivot the shelves in and out of the cabinet opening to ensure smooth movement and proper clearance. Make any necessary adjustments to shelf height or bracket alignment.

Image: The Rev-A-Shelf Half Moon Susans fully installed in a kitchen blind corner cabinet, showcasing its functionality with various food items stored on the shelves.

Operating Instructions

Using your Rev-A-Shelf Half Moon Susans is straightforward:

• Accessing Items: Gently pull the front edge of the half-moon shelves towards you. The entire unit will pivot out of the blind corner, bringing the stored items into full view and easy reach.
• Storing Items: Place items on the shelves, distributing weight evenly. Push the shelves back into the cabinet until they are fully retracted into the blind corner.
• Weight Capacity: Avoid overloading the shelves. While durable, excessive weight can strain the pivot mechanism and potentially damage the unit or cabinet.

Maintenance

Regular cleaning and occasional checks will ensure your Half Moon Susans remain in optimal condition.

• Cleaning: Wipe the polymer shelves with a damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals, as these can damage the polymer finish. Dry thoroughly.
• Hardware Check: Periodically inspect the pivot hardware and mounting screws to ensure they are secure. Tighten any loose screws.
• Lubrication: If the pivoting action becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points of the hardware. Avoid oil-based lubricants, which can attract dust and grime.

Troubleshooting

Specifications

Warranty and Support

Rev-A-Shelf products are manufactured to high standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Rev-A-Shelf website.

For technical assistance, replacement parts, or further inquiries, please contact Rev-A-Shelf customer support:

• Website: www.rev-a-shelf.com
• Phone: (800) 626-1126
• Address: 12400 Earl Jones Way, Louisville, KY 40299