PETZL Attache Carabiner Instruction Manual

1. Product Overview

The PETZL Attache Carabiner is a compact, lightweight, and asymmetrical locking carabiner designed for various climbing and mountaineering applications. Its design prioritizes ease of use, durability, and safety, making it a reliable component in your gear system.

Key Features:

• Compact, lightweight asymmetrical design for optimal handling.
• Keylock system to prevent the carabiner from snagging on ropes, slings, or gear loops during maneuvers.
• Wider contact surfaces for improved rope glide and reduced wear on the carabiner.
• SCREW-LOCK locking sleeve for secure and effective locking, providing a visual indicator of its status.
• Certified to CE EN 12275 type H and UIAA standards, ensuring compliance with safety requirements.

2. Setup and Initial Inspection

Before each use, perform a thorough inspection of your Attache Carabiner to ensure it is in proper working condition. This is crucial for safety and optimal performance.

2.1. Visual Inspection

• Check the carabiner body for any signs of cracks, deformation, sharp edges, or excessive wear that could compromise its strength.
• Inspect the gate for proper opening and closing. Ensure it springs back fully and smoothly when released.
• Examine the SCREW-LOCK sleeve. It should turn smoothly and fully engage the gate. Look for any damage, cross-threading, or debris that might impede its function.
• Verify that the red visual indicator on the SCREW-LOCK sleeve is clearly visible when unlocked and completely covered when fully locked.
• Ensure there is no corrosion or excessive dirt accumulation, especially in the gate mechanism.

3. Operating Instructions

The PETZL Attache Carabiner is designed for secure and efficient handling within climbing and mountaineering systems. Always ensure correct operation for safety.

3.1. Locking and Unlocking the Gate

1. To unlock, rotate the SCREW-LOCK sleeve downwards (away from the gate opening) until the red visual indicator is fully visible.
2. To open the gate, push the gate inwards.
3. To close the gate, release the gate. It should automatically spring shut.
4. To lock, rotate the SCREW-LOCK sleeve upwards (towards the gate opening) until it is fully tightened and the red visual indicator is completely covered. Always ensure the carabiner is locked during use.

3.2. Proper Use

• Always ensure the carabiner is correctly oriented and loaded along its major axis. Avoid cross-loading or loading the gate, as this significantly reduces its strength.
• Use the carabiner only for its intended purpose in climbing, mountaineering, and related safety systems.
• Regularly check that the SCREW-LOCK sleeve remains fully locked throughout its use, especially after any movement or impact.
• The Keylock system is designed to prevent snagging on ropes, slings, or gear loops, facilitating smoother operations.

4. Maintenance and Care

Proper maintenance extends the lifespan of your carabiner and ensures its continued reliability and safety.

4.1. Cleaning

• Clean the carabiner with fresh water and a mild soap if it becomes dirty, especially after exposure to saltwater, sand, or mud.
• Rinse thoroughly to remove all soap residue and allow it to air dry completely in a shaded area.
• For the screw mechanism, a small amount of silicone-based lubricant can be applied if it becomes stiff, but avoid over-lubrication which can attract dirt.

4.2. Storage

• Store the carabiner in a dry, cool place, away from direct sunlight, corrosive chemicals, and extreme temperatures.
• Avoid storing it with corrosive materials or sharp objects that could cause damage or wear.

5. Troubleshooting

This section addresses common issues you might encounter with your Attache Carabiner.

5.1. Gate or Lock Mechanism Sticking

If the gate or SCREW-LOCK sleeve becomes stiff or sticky:

1. Inspect for dirt, sand, or debris lodged in the mechanism. Clean thoroughly as described in the Maintenance section.
2. Ensure no foreign objects are physically obstructing the gate or screw.
3. Apply a small amount of silicone-based lubricant to the screw threads and pivot points, then work the mechanism repeatedly to distribute it.
4. If the issue persists after cleaning and lubrication, discontinue use and consult a qualified professional or PETZL customer support.

5.2. Red Indicator Visible When Locked

If the red visual indicator is still visible after tightening the SCREW-LOCK sleeve:

1. Ensure the sleeve is fully tightened by rotating it firmly upwards until it stops.
2. Check for any obstruction preventing the sleeve from fully engaging and covering the red indicator.
3. If the sleeve cannot be fully tightened to completely cover the red indicator, the carabiner is not securely locked. Do not use it in this condition.

6. Technical Specifications

7. Warranty and Customer Support

For information regarding warranty coverage, product returns, or technical assistance, please contact PETZL directly through their official website or authorized distributors.

Always refer to the official PETZL documentation for the most up-to-date safety information and usage guidelines, as these instructions are general and may not cover all specific scenarios.

Official Website: www.petzl.com