1. Introduction
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Sauder Palladia Armoire, Model 420608, in Vintage Oak finish. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Figure 1: Front view of the Sauder Palladia Armoire.
Video 1: A brief 8-second overview showcasing the Sauder Palladia Armoire rotating to display its design and finish.
2. Safety Information
For your safety and to prevent damage to the product, please observe the following:
- This armoire has been safety tested for stability to help reduce tip-over accidents.
- It complies with ASTM F2057-23 Standard Safety Specifications for Clothing Storage Units as required by the STURDY Act.
- Always ensure the armoire is placed on a level surface.
- Do not allow children to climb on the armoire or open drawers/doors simultaneously, as this may cause instability.
- Use the provided anti-tip hardware to secure the armoire to a wall, if applicable.
3. Parts List
Before beginning assembly, verify that all components are present and undamaged. Each part is typically labeled for easy identification during assembly.
Components:
- Engineered Wood Panels (various sizes for sides, top, bottom, back, doors, drawer)
- Garment Rod
- Adjustable Shelf
- Drawer Slides (metal)
- Door Hinges (metal)
- Door Knobs (metal)
- Drawer Pulls (metal)
- Various Fasteners (screws, cam locks, dowels, etc.)
- Anti-tip Hardware
Tools Required (not included):
- Phillips Head Screwdriver
- Hammer
4. Assembly Instructions
Assembly typically requires approximately 45 minutes to 2 hours, depending on experience. It is recommended to assemble the unit in the room where it will be used due to its weight and size once assembled.
General Steps:
- Unpack and Organize: Lay out all parts on a soft, clean surface to prevent scratches. Group similar parts and hardware. Refer to the included assembly guide for part identification.
- Assemble the Base: Follow the instructions to connect the bottom panel and side supports.
- Construct the Main Frame: Attach the side panels to the base and then secure the top panel. Ensure all cam locks and screws are tightened appropriately. Caution: Do not overtighten screws, especially when attaching hinges, as this can crack the engineered wood. Tighten firmly but avoid excessive force.
- Install Drawer Slides: Attach the metal drawer slides to the interior side panels of the armoire and to the drawer box.
- Assemble the Drawer: Construct the drawer box and attach the drawer pulls. Insert the drawer into the installed slides.
- Attach Doors: Secure the metal hinges to the armoire doors and then attach the doors to the main frame. Install the door knobs.
- Install Garment Rod and Shelf: Place the garment rod in its designated supports. Insert the adjustable shelf at your desired height.
- Attach Back Panel: Secure the back panel to the armoire using the provided fasteners.
- Adjust Doors and Drawer: After assembly, minor adjustments to the door hinges and drawer slides may be necessary to ensure proper alignment and smooth operation. Hinges typically have screws for adjusting vertical position and depth (how close the door sits to the frame). Drawer slides often have a slotted hole for fine-tuning the front panel alignment.
- Secure to Wall: For enhanced safety, attach the armoire to a wall using the anti-tip hardware provided.
Figure 2: Dimensional diagram of the armoire, indicating overall height, width, depth, and internal storage measurements.
5. Usage
The Sauder Palladia Armoire is designed to provide versatile storage for various items.
Hanging Storage:
The upper section features a garment rod, ideal for hanging clothing such as blouses, slacks, dresses, and jackets. This helps keep garments wrinkle-free and easily accessible.
Figure 3: The armoire with its doors open, revealing the garment rod and an open drawer below.
Drawer Storage:
The spacious bottom drawer operates on smooth metal runners, providing convenient storage for items like shoes, spare blankets, folded clothing, or other accessories. The drawer pulls are designed for easy access.
Figure 4: A close-up view of the armoire's drawer, shown open and containing soft items.
Adjustable Shelf:
An adjustable shelf is included, allowing you to customize the internal storage space to suit your needs. This shelf can be positioned at various heights to accommodate different item sizes.
6. Maintenance
To maintain the appearance and longevity of your armoire, follow these simple care instructions:
- Cleaning: Wipe the surfaces with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the Vintage Oak finish.
- Spills: Clean spills immediately to prevent staining.
- Hardware: Periodically check all fasteners and hardware to ensure they remain tight. Tighten as necessary, but do not overtighten.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
7. Troubleshooting
If you encounter any issues with your armoire, refer to the following common solutions:
Doors Not Aligning Properly:
- Check that the armoire is on a level surface.
- Adjust the door hinges. Most hinges have multiple adjustment screws to move the door up/down, left/right, and in/out relative to the frame. Loosen the appropriate screws slightly, make small adjustments, and then re-tighten.
Drawer Not Sliding Smoothly:
- Ensure the drawer slides are correctly installed and aligned.
- Check for any obstructions in the drawer tracks.
- Verify that the drawer box itself is assembled squarely.
Unit Feels Unstable:
- Confirm all assembly fasteners are securely tightened.
- Ensure the armoire is placed on a flat, stable floor.
- Utilize the provided anti-tip hardware to anchor the unit to a wall.
8. Specifications
| Brand | Sauder |
| Model Number | 420608 |
| Finish Type | Vintage Oak Finish |
| Product Dimensions (D x W x H) | 21.42" x 36.3" x 66.77" |
| Item Weight | 130 Pounds |
| Material | Engineered Wood |
| Number of Shelves | 1 (Adjustable) |
| Storage Options | Hanging space, Drawer storage, Concealed storage |
| Assembly Required | Yes |
| Country/Region Of Origin | Vietnam |
Figure 5: The Sauder Palladia Armoire in a bedroom setting, showcasing its Vintage Oak finish.
9. Warranty and Support
Warranty Information:
Your Sauder Palladia Armoire (Model 420608) is protected by a 5-year limited warranty covering parts. Please refer to the warranty documentation included with your product for full terms and conditions.
Customer Support:
For assistance with assembly, missing parts, or any other product-related inquiries, please contact Sauder customer service. Contact information can typically be found on the Sauder website or in the packaging materials.
