1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Inspire One-Light LED Flush Mount, Model P3696-2030K9. Please read these instructions thoroughly before beginning installation and retain them for future reference. This fixture features an antique bronze finish, an etched glass diffuser, and an off-white linen shade, designed for indoor residential use.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with electrical wiring.
- Use only UL/cUL listed wire connectors.
- This product is designed for indoor use only. Do not install in wet locations.
- Ensure the fixture is securely mounted to a structurally sound part of the ceiling.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product.
- LED Flush Mount Fixture (P3696-2030K9)
- Mounting Hardware Kit
- Installation Sheet (this document)
Figure 1: Progress Lighting Inspire LED Flush Mount Fixture (P3696-2030K9) in Antique Bronze. This image shows the complete assembled light fixture.
4. Specifications
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims improperly. |
|
|
| Fixture does not sit flush with the ceiling. |
|
|
Figure 2: Dimensional drawing of the Inspire LED Flush Mount, showing a 13-inch diameter and 6-inch height.
5. Setup and Installation
Before You Begin: Ensure power is disconnected at the circuit breaker. Gather necessary tools (screwdriver, wire strippers, electrical tape, safety glasses).
- Prepare Mounting Plate: Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure it is secure.
- Electrical Connections:
- Connect the green or bare copper ground wire from the fixture to the green or bare copper ground wire from the junction box using a wire connector.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire connector.
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire connector.
- Ensure all connections are tight and secure.
- Mount the Fixture: Carefully push the wired fixture up to the ceiling, aligning the mounting holes on the fixture with the screws on the mounting plate. Secure the fixture with the decorative nuts or screws provided.
- Install Shade and Diffuser: Place the etched glass diffuser into the fixture, followed by the off-white linen shade. Secure them according to the specific design of your fixture (e.g., with a finial or retaining ring).
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker.
Note: For detailed diagrams, refer to the separate installation sheet included with your product.
6. Operating Instructions
The Progress Lighting Inspire LED Flush Mount is operated via a standard wall switch. If connected to a compatible dimmer switch, the light output can be adjusted to your desired brightness level.
- Turning On/Off: Flip the wall switch connected to the fixture to turn the light on or off.
- Dimming Function: If a compatible dimmer switch is installed, rotate or slide the dimmer control to adjust the light intensity. Ensure your dimmer switch is rated for LED lighting.
7. Maintenance
To ensure the longevity and appearance of your fixture, follow these maintenance guidelines:
- Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- Shade Care: The linen shade can be gently dusted with a soft brush or vacuumed with a brush attachment. Avoid getting the shade wet.
- LED Light Source: The integrated LED light source is designed for long-term use and is not user-replaceable.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims improperly. |
|
|
| Fixture does not sit flush with the ceiling. |
|
|
9. Warranty and Support
This Progress Lighting product is covered by a 5-year Limited Warranty. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.
For warranty claims, technical assistance, or missing parts, please contact Progress Lighting customer service. Refer to the official Progress Lighting website for current contact information.
Online Resources: Visit the Progress Lighting Store on Amazon
