Introduction
The Case-Mate Universal pocket offers a practical solution for carrying identification and credit cards. Constructed from durable materials, this pocket securely holds two cards using a strong adhesive. Its straightforward application is suitable for smooth surfaces, allowing users to consolidate their essential items with their phone for convenience.
Setup
Application Instructions
- Prepare Surface: Ensure the back of your phone or phone case is clean, dry, and free of dust or oils. A clean surface is crucial for optimal adhesive performance.
- Position the Wallet: Carefully align the stick-on wallet to your desired position on the back of your device.
- Remove Adhesive Backing: Peel off the protective film from the 3M adhesive on the back of the wallet.
- Apply Firmly: Press the wallet firmly onto the prepared surface for at least 30 seconds to ensure a strong bond. Allow the adhesive to set for a few hours before inserting cards for best results.
Installation Video
This short video demonstrates the application and use of the Case-Mate stick-on credit card wallet.
Operating Instructions
Inserting and Removing Cards
- Card Capacity: The wallet is designed to securely hold up to two standard-sized cards, such as an ID card and a credit card.
- Inserting Cards: Gently slide your cards into the designated slots. The material is designed to hold cards snugly.
- Removing Cards: To remove a card, gently push it upwards from the bottom or pull it from the top edge.
Maintenance
Cleaning Your Wallet
To maintain the appearance and cleanliness of your Case-Mate stick-on credit card wallet, follow these simple cleaning instructions:
- Wet Wipe Clean: Use a soft, damp cloth or a wet wipe to gently clean the surface of the wallet.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the material and finish.
- Air Dry: Allow the wallet to air dry completely before re-inserting cards or using your device.
Troubleshooting
Common Issues and Solutions
- Cards are too tight: The wallet is designed for a snug fit. Over time, with regular use, the material may stretch slightly to accommodate cards more easily. Avoid forcing multiple cards beyond the recommended capacity.
- Cards feel loose or might fall out: If the wallet has been consistently overfilled, the material may have stretched excessively. Consider replacing the wallet if cards no longer feel secure.
- Wallet is not sticking properly: Ensure the application surface was thoroughly cleaned and dry before initial application. If the adhesive has lost its effectiveness, the wallet may need to be replaced.
- Edges are lifting: This can occur if the surface was not clean during application or if the wallet experiences frequent friction. Re-pressing the edges firmly may help, but if the adhesive is compromised, replacement might be necessary.
Specifications
| Feature | Detail |
|---|---|
| Brand | Case-Mate |
| Model Number | CM035992 |
| Color | Black Iridescent Glitter |
| Material | Thermoplastic Polyurethane (TPU) |
| Wallet Compartment Type | Credit Card, ID Card |
| Closure Type | No closure (open top) |
| Number of Compartments | 2 |
| Number of Pockets | 2 |
| Wallet Card Slot Count | 2 |
| Item Weight | 8 Grams |
| Item Dimensions | 4 x 0.28 x 8 inches |
| Product Care Instructions | Wet Wipe Clean |
Warranty Information
This Case-Mate product is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
For warranty claims or further details, please refer to the official Case-Mate website or contact their customer support directly.
Support
For additional assistance, product inquiries, or technical support, please visit the official Case-Mate support page or contact their customer service team. Contact information can typically be found on the manufacturer's website.
Online Support: Visit Case-Mate Support