Active Era Premium Single Air Mattress User Manual

1. Introduction

Thank you for choosing the Active Era Premium Single Air Mattress. This manual provides essential information for the safe and efficient use, setup, and maintenance of your air mattress. Please read it thoroughly before first use and retain it for future reference.

This premium single air mattress is designed for comfort and convenience, featuring a built-in electric pump and an integrated pillow. It is suitable for indoor use, camping, or as an extra bed for guests.

2. Safety Information

• Do not overinflate the mattress. Overinflation can cause damage and is not covered by warranty.
• Keep sharp objects away from the mattress surface.
• Ensure the area around the mattress is clear of hazards before inflation and use.
• Do not use the mattress near open flames or heat sources.
• This mattress is designed for sleeping and lounging. Avoid jumping on it.
• Maximum weight capacity: 120 kg (264 lbs). Do not exceed this limit.
• Keep the electric pump dry and away from water. Do not operate the pump with wet hands.
• Unplug the pump from the power outlet when not in use or during cleaning.
• Children should be supervised when near the air mattress.

3. Setup and Inflation

3.1 Unpacking

Carefully remove the air mattress from its packaging. Unroll it and lay it flat on a clean, level surface, ensuring there are no sharp objects underneath.

This image illustrates the quick setup process, showing how the mattress can be unfolded and prepared for inflation. The original image text translates to 'Quick Setup. Unfolds in minutes for stress-free nights and unexpected guests.'

3.2 Inflation using the Built-in Electric Pump

1. Locate the built-in electric pump on the side of the mattress.
2. Ensure the power cord is fully extended and plug it into a standard electrical outlet.
3. Turn the pump dial or switch to the 'INFLATE' position. The pump will begin to inflate the mattress.
4. The mattress will fully inflate in approximately 90 seconds to 1 minute 30 seconds. Monitor the inflation to achieve your desired firmness.
5. Once the desired firmness is reached, turn the pump dial or switch to the 'OFF' position.
6. Unplug the power cord and store it in its designated compartment on the pump.

This image shows the integrated electric pump and the manual valve. The original image text translates to 'Ready Before You Are. Inflates completely while you get ready for bed.' It also highlights 'Manual Valve' and 'Integrated Electric Pump' with a 3-minute inflation time indicator.

This image provides a detailed view of the integrated quick inflation pump, showing the 'INFLATE' and 'DEFLATE' functions. The original image text translates to 'Integrated Quick Inflation Pump. An easy-to-use integrated electric pump allows the air mattress to be inflated to the desired firmness in 90 seconds.'

3.3 Manual Inflation (Optional)

If an electrical outlet is not available, the mattress can be inflated using a manual foot pump (not included). Open the manual valve and use a compatible pump to inflate. Close the valve securely once inflated.

4. Operating the Air Mattress

4.1 Using the Mattress

Once inflated, the mattress is ready for use. The integrated raised pillow provides head and neck support for enhanced comfort. The 21 structured air coils ensure even weight distribution and spinal alignment.

This image illustrates the air mattress's ability to maintain inflation throughout the night, providing consistent comfort. The text on the image translates to 'Stays inflated all night. The comfort of a real bed, wherever you are.'

This image highlights the internal structure of the mattress with 21 air coils designed to prevent stiffness and aches by offering superior spinal support. The original image text translates to 'No More Stiffness and Aches. Designed with 21 internal coils to offer the support of a real mattress.'

This image demonstrates the absolute comfort provided by the 21 air coils, which ensure uniform weight distribution and optimal spinal alignment for a restorative night's sleep. The original image text translates to 'Absolute Comfort. Designed with 21 air coils to allow uniform weight distribution and optimal spinal alignment for a restorative night's sleep.'

4.2 Deflation and Storage

1. Ensure the mattress is clean and dry before deflating.
2. Plug the electric pump into an electrical outlet.
3. Turn the pump dial or switch to the 'DEFLATE' position. The pump will begin to extract air from the mattress.
4. Once the mattress is mostly deflated, you can gently press on it to help expel any remaining air.
5. Turn the pump to 'OFF' and unplug it.
6. Fold the mattress neatly and place it into the included carry bag for compact storage.

This image shows the air mattress neatly folded and stored in its carry bag, emphasizing its portability and ease of storage. The original image text translates to 'Store It. Carry It. Folds into an included carry bag for easy storage.'

5. Maintenance and Care

5.1 Cleaning

To clean the mattress, wipe the flocked surface and PVC sides with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners. Allow the mattress to air dry completely before storing.

This image highlights the soft, skin-friendly flocked surface and its ease of cleaning. The original image text translates to 'Sleep Like a Baby. Soft and pleasant surface for the skin with integrated pillow for divine sleep.' It also shows 'Soft Flocked Top' and 'Easy to Clean.'

5.2 Repairing Punctures

A repair patch kit is included with your mattress. In case of a small puncture:

1. Locate the puncture. You can do this by applying soapy water to the deflated mattress and looking for bubbles when pressure is applied.
2. Ensure the area around the puncture is clean and dry.
3. Cut a patch from the repair kit slightly larger than the puncture.
4. Apply the patch firmly over the puncture, ensuring no air bubbles are trapped underneath.
5. Allow the adhesive to cure for several hours before reinflating the mattress.

This image emphasizes the mattress's durability and includes a visual of the repair patches. The original image text translates to 'Built to Last. With 10% thicker material to withstand the test of time.' It also states 'The mattress supports up to 120kg' and 'Repair Patches Included.'

6. Troubleshooting

• Mattress not inflating: Check if the power cord is securely plugged in and the pump dial is set to 'INFLATE'. Ensure the manual valve is closed.
• Mattress deflating slowly: This can be normal over extended periods due to temperature changes or material stretching. If deflation is rapid, check for punctures using the soapy water method described in Section 5.2. Ensure the pump dial is in the 'OFF' position and the manual valve is fully closed.
• Pump is noisy: A certain level of noise is normal for electric pumps. If the noise is excessive or unusual, ensure the pump is clear of obstructions.
• Unpleasant odor: New PVC products may have a slight odor initially. This typically dissipates after a few days of airing out.

7. Specifications

This image displays the dimensions of the single air mattress: Height 35.5cm, Length 187cm, Width 100cm. Note: Dimensions may vary slightly by model iteration or inflation level. The variant title specifies 187 x 99 x 53cm.

8. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Active Era website. Keep your proof of purchase for any warranty claims.