1. Introduction
Thank you for choosing the allen + roth 18-Inch 3-Speed Oscillation Indoor Outdoor Wall Fan. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your fan. Please read these instructions thoroughly before use and retain them for future reference.
This fan is designed for both indoor and outdoor use, offering three speed settings and an oscillation feature to provide optimal air circulation.
2. Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:
- Read all instructions before using this fan.
- Ensure the power source matches the electrical requirements of the fan (120 Volts).
- Always unplug the fan from the power outlet before cleaning, servicing, or relocating.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Do not insert fingers or foreign objects into any ventilation or exhaust opening.
- Do not use this fan with any solid-state speed control device.
- This fan is suitable for indoor and outdoor use. When used outdoors, ensure the power outlet is rated for outdoor use and protected from moisture.
- Mount the fan securely to a wall stud or appropriate structural support to prevent it from falling.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- 18-Inch Wall-Mounted Fan Unit
- Mounting Bracket
- Mounting Hardware (screws, anchors)
- Power Cord
- Instruction Manual (this document)
4. Installation Instructions
Proper installation is crucial for the safe and effective operation of your wall fan. If you are unsure about any step, consult a qualified electrician or installer.
- Select Mounting Location: Choose a sturdy wall location capable of supporting the fan's weight (approximately 21.9 lbs or 9.96 kg). Ensure there is adequate clearance around the fan for air circulation and oscillation. Avoid areas where the fan could be easily bumped or where the power cord could be a tripping hazard.
- Mark Drilling Points: Hold the mounting bracket against the wall at the desired height and use a pencil to mark the drilling points for the mounting screws.
- Drill Pilot Holes: Drill pilot holes at the marked locations. Use appropriate drill bits for your wall material (e.g., wood stud, drywall with anchors, masonry).
- Attach Mounting Bracket: Securely fasten the mounting bracket to the wall using the provided screws and anchors. Ensure the bracket is level and firmly attached.
- Mount Fan Unit: Carefully lift the fan unit and attach it to the installed mounting bracket according to the specific design of the bracket. Ensure all locking mechanisms or screws are tightened to secure the fan in place.
- Adjust Fan Angle: Loosen the adjustment knob(s) on the fan head to tilt the fan to your desired angle. Tighten the knob(s) firmly once the angle is set.
- Connect Power: Plug the power cord into a grounded 120-Volt electrical outlet. Ensure the outlet is suitable for the fan's indoor/outdoor rating.
5. Operating Instructions
Your allen + roth wall fan features three speed settings and an oscillation function, controlled via push buttons or a touch interface.
- Power On/Off: Locate the power button, typically marked with an 'O' or 'I' symbol. Press once to turn the fan on, and press again to turn it off.
- Adjust Fan Speed: The fan offers three speed settings (Low, Medium, High). Use the speed control buttons (often labeled 1, 2, 3 or with fan blade icons) to cycle through the desired speed.
- Activate Oscillation: To enable the oscillation feature, press the oscillation button (often marked with a circular arrow icon). The fan head will begin to sweep from side to side. Press the button again to stop oscillation at a desired direction.
6. Maintenance
Regular cleaning and proper storage will extend the life of your fan.
- Cleaning:
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe down the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- For dust accumulation on the fan blades or inside the grille, use a vacuum cleaner with a brush attachment or compressed air. If necessary, the front grille may be removable for deeper cleaning (refer to specific product diagrams if available).
- Ensure all parts are completely dry before plugging the fan back in.
- Storage:
- If storing the fan for an extended period, clean it thoroughly.
- Store the fan in its original packaging or cover it to protect it from dust and moisture.
- Store in a cool, dry place.
7. Troubleshooting
If you experience issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power to the unit. Power cord not fully plugged in. Circuit breaker tripped. | Ensure the fan is plugged into a live outlet. Check the power cord connection. Reset the circuit breaker if necessary. |
| Fan is noisy or vibrates excessively. | Loose components. Fan not securely mounted. Debris in fan blades. | Check all screws and connections for tightness. Ensure the mounting bracket is firmly attached to the wall. Unplug the fan and carefully remove any debris from the blades. |
| Oscillation function is not working. | Oscillation mechanism jammed. Oscillation button not activated. | Unplug the fan and check for any obstructions around the oscillation mechanism. Press the oscillation button to activate the feature. |
If the problem persists after attempting these solutions, contact customer support.
8. Specifications
- Brand: allen + roth
- Model Name: 742574214093
- ASIN: B01INZYZHC
- Size: 18 Inch
- Color: Bronze
- Number of Blades: 3
- Speed Settings: 3 RPM (Low, Medium, High)
- Voltage: 120 Volts
- Wattage: 100 watts
- Power Source: Corded Electric
- Control Method: Touch / Push Button
- Special Feature: Oscillating
- Indoor/Outdoor Usage: Indoor, Outdoor
- Item Weight: 21.9 pounds (9.96 Kilograms)
- Package Dimensions: 23.5 x 23.5 x 12 inches
9. Warranty and Support
This product is typically covered by a manufacturer's limited warranty. Please refer to the warranty card included with your purchase or visit the official allen + roth website for detailed warranty terms and conditions.
For technical support, replacement parts, or further assistance, please contact allen + roth customer service. Contact information can usually be found on the product packaging or the manufacturer's official website.
