Introduction
This manual provides detailed instructions for the mophie Wireless Charging Car Vent Mount. This device allows for hands-free use and wireless charging of compatible mophie cases with Charge Force wireless power in your vehicle. The magnetic attachment ensures secure placement and automatic charging upon contact. It also supports easy rotation for optimal viewing, enhancing convenience and safety while driving.
Setup
1. Package Contents
- Charge Force Vent Mount
- USB Car Charger
- Micro USB Cable
- Quick Start Guide
2. Installation
2.1 Attaching the Vent Mount
Carefully insert the vent mount's prongs into a suitable air vent in your vehicle. Ensure a secure fit to prevent movement during driving. The rubberized grip helps protect your vehicle's air vent. Adjust the mount's angle for optimal viewing before placing your device.
Image: The mophie Wireless Charging Car Vent Mount, showing the vent attachment mechanism and the micro USB port for power.
2.2 Connecting Power
Connect the provided micro USB cable to the vent mount's power input port. Plug the other end of the micro USB cable into the included USB car charger. Insert the USB car charger firmly into your vehicle's 12V power outlet (cigarette lighter socket). A power indicator light on the mount may illuminate to confirm power connection.
Operating Instructions
1. Wireless Charging
Ensure your mobile device is equipped with a compatible mophie case featuring Charge Force wireless power. Once the vent mount is powered, simply place your mophie-cased device against the magnetic surface of the vent mount. Charging will begin automatically upon contact. The magnetic attraction will securely hold your device in place, allowing for convenient hands-free use.
Image: A smartphone in a mophie case magnetically attached to the vent mount, displaying a charging indicator.
2. Device Orientation
The magnetic design allows for easy rotation of your device from portrait to landscape orientation while it is mounted. This feature is ideal for navigation, media viewing, or hands-free calls, providing flexibility without detaching the device.
Image: A side view of a smartphone in a mophie case attached to the vent mount, illustrating the secure magnetic connection and rotational capability.
Maintenance
1. Cleaning
To clean the vent mount, first disconnect it from the power source. Wipe the surface with a soft, slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the device. Ensure the mount is completely dry before reconnecting power or attaching a device.
Troubleshooting
1. Device Not Charging
- Power Connection: Ensure the vent mount is properly connected to a powered 12V outlet in your vehicle. Verify that the micro USB cable is securely connected to both the mount and the car charger.
- Compatibility: Confirm your device has a compatible mophie case with Charge Force wireless power. This mount is designed specifically for mophie Charge Force cases.
- Alignment: Reposition the device on the mount to ensure proper alignment with the internal charging coils. Slight adjustments may be necessary.
2. Device Not Holding Securely
- Mount Installation: Ensure the vent mount is firmly installed in the vehicle's air vent. A loose connection to the vent can cause instability.
- Magnetic Interference: Check that the mophie case on your device and the mount's surface are free from debris or obstructions that might interfere with the magnetic connection. The magnetic plates in the mophie wireless case and the mount must align perfectly for a secure hold.
3. Intermittent Charging
- Device Position: This can occur if the device is not perfectly aligned or if there is slight movement. Try adjusting the device's position on the mount to find the optimal charging spot.
- Power Output: Ensure the car charger is providing sufficient power (up to 1.0A). If the issue persists, try a different 12V outlet or USB car charger to rule out power supply problems.
Specifications
| Product Dimensions | 2.64 x 1.87 x 3.74 inches |
| Item Weight | 6.2 ounces |
| Item Model Number | 3452_WRLS-VENT-BLK |
| Connectivity Technologies | USB, Wireless |
| Special Features | Magnetic, Wireless Charging |
| Color | Black |
| Amperage | 1 Amps |
| Total USB Ports | 1 |
| Wattage | 10 watts |
| Compatible Phone Models | juice pack wireless cases with charge force |
| Included Components | Charge force vent mount, USB car charger, micro USB cable, quick start guide |
Warranty Information
For detailed warranty information regarding your mophie Wireless Charging Car Vent Mount, please refer to the documentation included with your product at the time of purchase. You may also visit the official mophie website for the most current warranty terms and conditions.
Customer Support
Should you require further assistance, have questions about your product, or need technical support, please visit the official mophie support page. Contact details for customer service, including phone numbers and email addresses, can typically be found on their website.