1. Product Overview
The KRUPS F088 Aqua Filter System Water Filtration Cartridge is designed to enhance the taste of your coffee and extend the lifespan of your KRUPS coffee machine. This cartridge effectively reduces limescale, chlorine, impurities, lead, copper, and pesticides from your water, while preserving essential minerals and trace elements. Regular use ensures optimal water quality for superior coffee flavor and protects your appliance from mineral buildup.

Image 1.1: KRUPS F088 Aqua Filter System Water Filtration Cartridge (3-Pack) packaging and individual filters.
Key Features:
- Reduces limescale and mineral deposits.
- Improves overall water quality for better coffee taste.
- Prolongs the operational life of your coffee machine.
- Utilizes anti-scale substance and active carbon filtration.
- Preserves beneficial minerals and trace elements in water.
2. Compatibility
The KRUPS F088 Water Filtration Cartridge is specifically designed for use with KRUPS Precise Tamp espresso machines and fully automatic coffee machines. Compatible models include, but are not limited to:
- XP5220
- XP5240
- XP5280
- XP5620
- EA82 series
- EA9000 series
Always refer to your specific coffee machine's user manual for confirmation of filter compatibility.
3. Installation Instructions
Follow these steps to correctly install the KRUPS F088 water filtration cartridge into your compatible coffee machine:

Image 3.1: Top view of the KRUPS F088 filter, showing the connection point.
- Unpack the Filter: Remove one KRUPS F088 water filtration cartridge from its packaging.
- Rinse the Filter: Hold the filter under cold running tap water for approximately 2-3 minutes. This helps to remove any loose carbon particles and prepares the filter for use.
- Locate Filter Compartment: Refer to your KRUPS coffee machine's user manual to identify the water tank and the designated compartment for the water filter. This is typically located within the water tank itself.
- Insert the Filter: Carefully insert the rinsed filter into the filter holder or directly into the water tank's designated slot. Ensure it is securely seated and properly aligned according to your machine's instructions. Some models may require twisting the filter into place.
- Fill Water Tank: Fill the water tank with fresh, cold water up to the maximum fill line.
- Prime the System: Follow your coffee machine's specific instructions for initial filter activation or water system priming. This usually involves running a certain amount of water through the system without coffee to flush out air and activate the filter.

Image 3.2: Side view of the KRUPS F088 filter, illustrating its cylindrical shape.
4. Usage Guidelines
Once installed, the KRUPS F088 water filtration cartridge operates passively within your coffee machine's water system. It continuously filters the water used for brewing, ensuring that only purified water comes into contact with your coffee grounds. No specific user operation is required after installation, beyond ensuring the water tank is filled and the filter is replaced as recommended.
5. Maintenance and Replacement
To maintain optimal water quality and protect your coffee machine, regular filter replacement is essential. The KRUPS F088 water filtration cartridge should be replaced at least every two months. This recommendation may vary based on your local water hardness and frequency of machine use. Your coffee machine may also indicate when a filter change is due.
Replacement Procedure:
- Turn off and unplug your coffee machine.
- Remove the water tank from the machine.
- Carefully remove the used filter from its compartment.
- Dispose of the used filter responsibly.
- Install a new KRUPS F088 filter by following the 'Installation Instructions' in Section 3.
- Reset the filter indicator on your coffee machine, if applicable, according to your machine's manual.
6. Troubleshooting
If you encounter issues related to water quality or machine performance after installing the filter, consider the following:
- Reduced Water Flow: Ensure the filter is correctly seated and not clogged. If the filter is old, it may need replacement.
- Unusual Taste or Odor: Verify that the filter was rinsed thoroughly before installation. Check the filter's age; if it's past the recommended replacement period, replace it with a new one.
- Machine Error Message: If your coffee machine displays an error related to the water system, consult your machine's specific user manual. Ensure the filter is compatible with your model and correctly installed.
- Filter Not Activating: Confirm that the priming process (flushing water through the system) was completed as per your coffee machine's instructions.
For persistent issues, refer to your KRUPS coffee machine's comprehensive troubleshooting guide or contact KRUPS customer support.
7. Technical Specifications
| Specification | Detail |
|---|---|
| Model Number | F088 |
| Brand | KRUPS |
| Material | Carbon, Copper |
| Unit Count | 3 Count (per pack) |
| Item Weight (per filter) | 0.96 ounces |
| Product Dimensions (3-pack) | 9.3 x 1.6 x 9.1 inches |
| External Testing Certification | NSF |
| UPC | 797936374878 |
| Recommended Replacement | At least every two months |
8. Warranty and Customer Support
For detailed warranty information regarding your KRUPS F088 Aqua Filter System Water Filtration Cartridge, please refer to the documentation included with your original KRUPS coffee machine or visit the official KRUPS website. Warranty terms typically cover manufacturing defects.
Should you require further assistance, have questions about installation, usage, or need to report a product issue, please contact KRUPS customer service through their official website or the contact information provided in your coffee machine's manual.





