1. Introduction
The Crux SWRCR-59 is an aftermarket radio installation interface designed to integrate a new car stereo into select 2004-2013 Chrysler, Dodge, and Jeep vehicles. This interface ensures the retention of essential factory features, including steering wheel controls, and provides necessary navigational outputs for a seamless upgrade.
Image 1.1: The Crux SWRCR-59 radio replacement kit, designed for integrating aftermarket radios while retaining vehicle features.
2. Product Features
- Factory Feature Retention: Retains select factory features when installing an aftermarket radio in compatible Chrysler, Dodge, and Jeep vehicles.
- Steering Wheel Control (SWC) Retention: Maintains functionality of factory steering wheel controls via a built-in, pre-programmed interface.
- Amplified and Non-Amplified System Support: Compatible with both factory amplified and non-amplified audio systems.
- Navigational Outputs: Provides outputs for Reverse gear, Illumination, Parking Brake, and Speed signal, crucial for aftermarket navigation units.
- EIA Color-Coded Wiring: Features industry-standard EIA color-coded wiring for simplified installation.
- Durable Construction: Built with high-quality, fireproof ABS plastic for long-lasting performance.
Image 2.1: Visual representation of the Crux SWRCR-59 highlighting its key product features, including steering wheel control retention and navigational outputs.
3. Package Contents
The Crux SWRCR-59 package includes the following components:
- Crux SWRCR-59 Interface Module
- 1st Generation Wiring Harness
- 2nd Generation Wiring Harness
- Audio Filter
- SWC (Steering Wheel Control) Cables
- Installation Instructions
- Owner's Manual
Image 3.1: All components included in the Crux SWRCR-59 kit, showing the main module, wiring harnesses, audio filter, and SWC cables.
4. Vehicle Compatibility
The SWRCR-59 interface is compatible with select Chrysler, Dodge, Jeep, Mitsubishi, and Volkswagen vehicles from 2004-2017. Refer to the table below for specific models and years.
Image 4.1: A detailed compatibility chart for the Crux SWRCR-59, listing compatible Chrysler, Dodge, Jeep, Mitsubishi, and Volkswagen models and their respective year ranges.
Compatibility Notes:
- Front and Rear fading are NON-Adjustable on amplified systems.
- Supports radio replacement in vehicles with 4.3" and 8.4" color screens.
- Does not retain Uconnect.
- If your vehicle is not equipped with Steering Wheel Controls, use part # SOOCR-26.
- If you require a dash kit with SWC interface, use part # DKCR-59K.
5. Setup and Installation
Installation of the SWRCR-59 involves connecting the interface module to your aftermarket radio and vehicle's wiring harness. It is recommended to consult the detailed installation instructions included in the package for specific wiring diagrams and steps for your vehicle model.
Key Installation Steps:
- Prepare Wiring: Connect the SWRCR-59 wiring harness to your aftermarket radio's harness according to the EIA color codes.
- Module Connection: Connect the prepared harness to the SWRCR-59 module.
- Vehicle Connection: Connect the vehicle-specific harness to the factory wiring in your dashboard.
- Dip Switch Configuration: The SWRCR-59 module features a small dip switch. If steering wheel controls do not function after initial installation, adjust the dip switch from the 5V position to the 3V position. This adjustment is critical for proper SWC operation in some vehicles.
- Test Functionality: Before fully reassembling the dashboard, test all functions of the aftermarket radio and steering wheel controls.
For optimal results and to avoid potential damage, professional installation is highly recommended.
Image 5.1: Illustration depicting the straightforward plug-and-play installation process of the Crux SWRCR-59, simplifying aftermarket radio integration.
6. Operating Instructions
Once installed, the Crux SWRCR-59 allows your factory steering wheel controls to operate your new aftermarket radio. The functionality typically includes:
- Volume Control: Increase or decrease audio volume.
- Track/Station Selection: Skip tracks or change radio stations.
- Mode/Source Selection: Switch between audio sources (e.g., radio, USB, Bluetooth).
- Hands-Free Calling: Answer or end calls if your aftermarket radio supports this feature and is connected to your phone.
Refer to your aftermarket radio's manual for specific button assignments and customization options.
Image 6.1: Demonstrates how the Crux SWRCR-59 helps maintain full functionality of the vehicle's steering wheel controls with an aftermarket radio.
7. Maintenance
The Crux SWRCR-59 is designed for reliable, long-term performance with minimal maintenance. To ensure continued functionality:
- Keep Connections Secure: Periodically check that all wiring connections remain tight and free from corrosion.
- Avoid Moisture: Ensure the module is installed in a dry environment, away from direct exposure to water or excessive humidity.
- Clean Gently: If necessary, gently wipe the module with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
Image 7.1: Highlights the durable materials and precision engineering of the Crux SWRCR-59, ensuring reliable and uninterrupted performance.
8. Troubleshooting
If you encounter issues with your SWRCR-59 interface, consider the following troubleshooting steps:
- No Steering Wheel Control Functionality:
- Verify all SWC cables are securely connected to both the SWRCR-59 module and the aftermarket radio.
- Check the dip switch setting on the SWRCR-59 module. If SWC is not working, try switching it from the 5V position to the 3V position, or vice-versa, as required by your specific vehicle and radio.
- Ensure your aftermarket radio is configured to recognize external steering wheel controls. Consult your radio's manual.
- No Audio or Intermittent Audio:
- Confirm all power and speaker wires are correctly connected and making good contact.
- Check the audio filter connection, especially if your vehicle has a factory amplified system.
- No Power to Aftermarket Radio:
- Verify the constant 12V and accessory 12V connections from the vehicle harness to the SWRCR-59 harness.
- Check vehicle fuses.
For more complex issues, refer to the complete installation guide or contact Crux technical support.
9. Specifications
| Model Number | SWRCR-59D |
| Brand | CRUX |
| Connectivity Technology | Wired |
| Power Source | Vehicle Powered |
| Material | Fireproof ABS Plastic |
| Item Weight | 8 ounces |
| Special Features | Retains Steering Wheel Controls, Navigational Outputs |
| UPC | 850058234014 |
10. Warranty Information
The Crux SWRCR-59 interface comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
11. Support
For technical assistance, detailed installation guides, or warranty inquiries, please visit the official Crux website or contact their customer support. You can also find additional resources and product information on the Crux Amazon Store.
