Tommee Tippee Natural Start Baby's First Bottle and Pacifier Set Instruction Manual

1. Introduction

Thank you for choosing the Tommee Tippee Natural Start Baby's First Bottle and Pacifier Set. This manual provides essential information for the safe and effective use, care, and maintenance of your product. Please read these instructions carefully before first use and retain them for future reference.

What's Included:

• 2 x 5oz (150ml) Natural Start Anti-Colic BPA Free Bottles
• 2 x 9oz (260ml) Natural Start Anti-Colic BPA Free Bottles
• 2 x Extra Slow Flow Nipples (0m+)
• 2 x Medium Flow Nipples (3m+)
• 2 x 0-6 Month Pacifiers

2. Important Safety Information

For your child's safety and health, always follow these instructions:

• Always use this product with adult supervision.
• Never use feeding nipples as a soother.
• Continuous and prolonged sucking of fluids will cause tooth decay.
• Always check food temperature before feeding.
• Keep all components not in use out of reach of children.
• Before each use, inspect the nipple and pull it in all directions. Discard at the first signs of damage or weakness.
• Do not store with or allow to come into contact with solvents or harsh chemicals.
• Do not leave a feeding nipple in direct sunlight or heat, or leave in disinfectant (sterilizing solution) for longer than recommended, as this may weaken the nipple.
• All components are BPA-free.

3. Product Components and Features

The Tommee Tippee Natural Start bottles are designed to facilitate a seamless transition between breast and bottle feeding. Key features include:

• Breast-like Nipple: The silicone nipple mimics the flexibility and stretch of a breast, promoting natural latching.
• Anti-Colic Valve: Integrated into the nipple, this valve helps reduce air ingestion, minimizing discomfort.
• 100% Leakproof Design: When assembled correctly, the bottles are designed to be completely leakproof.

4. Assembly Instructions

Before first use, disassemble all parts and clean thoroughly. Refer to the 'Cleaning and Sterilization' section for detailed instructions.

Bottle Assembly:

1. Insert the nipple into the screw ring until it clicks into place.
2. Place the assembled nipple and screw ring onto the bottle.
3. Ensure the nipple and screw ring are securely fastened to the bottle to prevent leaks.
4. Place the cap over the nipple to keep it hygienic.

5. Cleaning and Sterilization

Proper cleaning and sterilization are crucial for your baby's health.

Cleaning:

• Wash all components in warm soapy water immediately after each use.
• Rinse thoroughly with clean water.
• All bottle components are dishwasher safe (top rack only).
• For thorough cleaning, use a bottle brush to clean the inside of the bottle and a nipple brush for the nipple.

Sterilization:

The Tommee Tippee Natural Start bottles are designed for convenient self-sterilization in a microwave.

1. Add 50ml of water to the bottle.
2. Rest the assembled hood, screw ring, and nipple on top of the bottle (do not fasten).
3. Heat in the microwave for 3 minutes.

Alternatively, you can sterilize using a steam sterilizer, boiling water, or cold water sterilization tablets according to the manufacturer's instructions.

6. Operating Instructions (Feeding)

The Natural Start bottles are designed to support paced feeding, allowing your baby to feed comfortably at their own pace.

Feeding Guidance:

• Prepare formula or breast milk according to guidelines.
• Always check the temperature of the feed before offering it to your baby.
• Hold the bottle at an angle that ensures the nipple is full of milk, minimizing air intake.
• Allow your baby to control the pace of feeding, taking breaks as needed.

Choosing the Right Nipple Flow:

Selecting the appropriate nipple flow is important for comfortable feeding:

7. Care and Storage

Care:

• Inspect nipples regularly for wear and tear. Replace nipples every 2-3 months or at the first sign of damage.
• Ensure all components are completely dry before storing to prevent mold or mildew.

Storage:

• Store bottles and pacifiers in a clean, dry, and covered container.
• Avoid storing in direct sunlight or near heat sources.

8. Troubleshooting

Common Issues and Solutions:

• Leakage:

  Ensure the nipple is correctly inserted into the screw ring and the screw ring is tightly fastened to the bottle. Check for any damage to the nipple or bottle rim.

• Baby Refuses to Feed or Gags:

  This may indicate the nipple flow is too fast. Consider switching to an extra slow flow nipple. Also, ensure the feeding position is comfortable for the baby.

• Sour Milk Smell After Washing:

  Even after washing, residual milk proteins can cause odors. Try soaking components in a solution of equal parts white vinegar and water for 30 minutes before washing. Rinse thoroughly.

9. Product Specifications

10. Warranty and Support

For information regarding warranty, product support, or to purchase replacement parts, please visit the official Tommee Tippee website or contact their customer service department. Contact details can typically be found on the product packaging or the brand's official website.