Yaheetech 69-Inch Extra Large Bird Cage Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech 69-Inch Extra Large Bird Cage, Model YT-2105. Designed for mid-sized parrots, cockatiels, conures, parakeets, lovebirds, budgies, finches, and other small animals like sugar gliders, rats, and squirrels, this cage offers a spacious and secure environment.

Image: The Yaheetech 69-Inch Extra Large Bird Cage, fully assembled, showcasing its multi-tiered design and spacious interior.

Safety Instructions

• Ensure all parts are securely fastened before placing pets inside the cage.
• Regularly inspect the cage for any damaged or loose components that could pose a risk to your pets.
• Keep small children and other household pets away from the cage during assembly to prevent injury.
• Do not hang heavy objects on the cage structure.
• Position the cage on a flat, stable surface to prevent tipping.

Package Contents

Verify that all components are present before beginning assembly. The package includes:

• Metal cage panels (various sizes)
• Base with pull-out tray
• Rolling stand with storage shelf
• Ladders (2 units)
• Wooden perches (6 units)
• Feeding bowls (8 units)
• Rope toy with bell (1 unit)
• Assembly hardware (screws, nuts, washers)
• Assembly tool (wrench/screwdriver)

Image: Diagram illustrating the overall dimensions of the cage and individual components like ladders and panels.

Setup and Assembly

Assembly typically requires two people and approximately one hour. An illustrated assembly guide is included in the package. For visual assistance, an assembly video may be available from the manufacturer.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all parts against the package contents list.
2. Assemble the Rolling Stand: Attach the four caster wheels to the base frame of the stand. Secure the bottom storage shelf to the stand frame using the provided hardware.
3. Construct the Cage Base: Place the main cage base onto the assembled rolling stand. Ensure it sits securely. Insert the pull-out tray into its designated slot.
4. Attach Side Panels: Connect the side panels to the cage base and to each other using the provided clips or screws. Ensure the door panels are correctly oriented.
5. Install Interior Platforms and Ladders: Position the interior platforms at the desired heights. Connect the ladders between the platforms to create a multi-tiered environment.
6. Secure Top Panel: Place and secure the top panel of the cage.
7. Insert Perches and Accessories: Place the wooden perches through the cage bars at various levels. Attach the feeding bowls to the small access doors. Hang the rope toy.
8. Final Check: Double-check all connections and locks to ensure the cage is stable and secure.

Image: Interior view of the cage showing the multi-level design with ladders connecting different sections and perches installed.

Image: The rolling stand component of the bird cage, featuring a lower storage shelf and caster wheels for mobility.

Operating Instructions

• Main Doors: The cage features two large front doors (53.5 x 25 cm / 21.1 x 9.8 inches) secured with crescent locks. To open, slide the lock mechanism and pull the door outwards. Ensure doors are securely latched when closed to prevent escape.
• Small Access Doors: Ten smaller doors are located on the sides and front for easy access to feeders, breeding boxes, or birdbaths. These doors are designed with an arc-shaped wire lock to prevent pets from lifting them.
• Feeding Bowls: Place food and water in the provided feeding bowls and insert them into the small access doors.
• Perches and Toys: Utilize the wooden perches and rope toy to provide enrichment and varied resting spots for your birds. Consider adding additional appropriate toys and natural perches for optimal bird health.
• Mobility: The cage is equipped with 360-degree swivel caster wheels on the stand, allowing for easy relocation. Lock the wheels when the cage is in its desired position to prevent accidental movement.

Image: Close-up view of the secure crescent lock mechanism on the main cage door, designed to prevent birds from opening it.

Image: Birds inside the cage, demonstrating the use of perches, a rope toy, and a feeder, highlighting the spacious interior.

Maintenance

• Cleaning the Tray: The pull-out tray located at the bottom of the cage can be easily removed for cleaning. Slide it out, empty debris, and wash with water and a mild, pet-safe cleaner. Ensure it is completely dry before reinserting.
• Cage Cleaning: Periodically wipe down the cage bars and surfaces with a damp cloth and a pet-safe disinfectant. Rinse thoroughly and allow to air dry completely before returning pets.
• Perch and Accessory Cleaning: Clean perches and toys regularly to maintain hygiene. Replace wooden perches if they become excessively soiled or damaged.

Image: Close-up of the pull-out tray mechanism, showing how it can be easily removed for cleaning.

Troubleshooting

• Bent Parts: If any metal parts are slightly bent upon arrival, gently straighten them by hand or with appropriate tools. Avoid excessive force to prevent damage.
• Unstable Cage: Ensure all screws and connections are tightened. Verify the cage is placed on a level surface.
• Doors Not Closing Securely: Check for any obstructions in the door frame or latch mechanism. Ensure the crescent locks are fully engaged.

Specifications

Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please contact Yaheetech customer service. Refer to the contact information provided with your purchase or visit the official Yaheetech website.

Note: The manufacturer provides an assembly video to assist with installation. Please check the product page or manufacturer's website for availability.