1. Introduction
This manual provides essential information for the safe and efficient use of your Philips Lighting 458224 PL-T Linear Compact Fluorescent Lamp. This 18-watt lamp features a 4-pin GX24q-2 base, providing 1200 lumens of 3500K white light with an 82 CRI. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Information
- WARNING: Risk of Electric Shock. Always disconnect power before installing, removing, or servicing the lamp.
- Ensure the lamp is cool before handling. Hot lamps can cause burns.
- Do not use this lamp in wet locations unless the fixture is specifically designed for such environments.
- This lamp is designed for use with a compatible electronic ballast. Using an incompatible ballast may damage the lamp or fixture.
- Do not attempt to disassemble or modify the lamp. There are no user-serviceable parts inside.
- Dispose of fluorescent lamps according to local regulations, as they contain small amounts of mercury.
3. Package Contents
- 1 x Philips Lighting 458224 PL-T Linear Compact Fluorescent Lamp
4. Setup and Installation
Follow these steps to safely install your Philips PL-T Compact Fluorescent Lamp:
- Turn off Power: Locate the circuit breaker or fuse box that controls the power to the fixture where the lamp will be installed. Turn off the power completely. Verify that the power is off before proceeding.
- Remove Old Lamp (if applicable): If replacing an existing lamp, allow it to cool down. Gently grasp the old lamp near its base and pull it straight out from the socket. Do not twist the lamp body.
- Inspect Fixture: Ensure the fixture's socket is clean and free from debris. Confirm that the fixture is designed for a GX24q-2 4-pin base and is compatible with an 18-watt CFL.
- Install New Lamp: Align the four pins on the base of the new Philips 458224 lamp with the corresponding slots in the GX24q-2 socket. Gently push the lamp straight into the socket until it is firmly seated. Do not force the lamp, as this can damage the pins or the socket.
- Restore Power: Once the lamp is securely installed, restore power at the circuit breaker or fuse box.
- Test Lamp: Turn on the light switch to confirm the lamp is functioning correctly.
Figure 1: Philips PL-T Compact Fluorescent Lamp. This image shows the overall design of the lamp, highlighting its tubular shape and the 4-pin GX24q-2 base, which is crucial for proper installation into compatible fixtures.
5. Operating Instructions
The Philips 458224 PL-T Compact Fluorescent Lamp operates like any standard light bulb once installed correctly. Simply use the wall switch or fixture control to turn the light on or off. Allow a brief warm-up period for the lamp to reach full brightness, which is typical for fluorescent technology.
6. Maintenance
- Cleaning: Ensure the power is off and the lamp is cool before cleaning. Gently wipe the lamp with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the lamp's surface or internal components.
- Replacement: When the lamp reaches the end of its life (indicated by flickering, dimming, or failure to light), follow the installation steps in Section 4 to safely replace it. Remember to turn off the power before removal.
7. Troubleshooting
If your Philips 458224 lamp is not functioning as expected, consider the following:
- Lamp Does Not Light:
- Check if the power switch is on.
- Verify that the circuit breaker has not tripped.
- Ensure the lamp is fully and correctly seated in the socket.
- Confirm the fixture's ballast is compatible and functioning.
- If possible, test the lamp in another compatible fixture or try a new lamp in the current fixture to isolate the problem.
- Lamp Flickers:
- Flickering can indicate an aging lamp or a failing ballast.
- Ensure the lamp is securely installed.
- If flickering persists, consider replacing the lamp or having the ballast checked by a qualified electrician.
- Dim Light Output:
- The lamp may be nearing the end of its operational life.
- Ensure the lamp and fixture are clean, as dust can reduce light output.
8. Specifications
Detailed technical specifications for the Philips Lighting 458224 PL-T Linear Compact Fluorescent Lamp:
| Feature | Specification |
|---|---|
| Brand | Philips |
| Model Number | 458224 |
| Light Type | CFL (Compact Fluorescent Lamp) |
| Wattage | 18 Watts |
| Base Type | GX24q-2 (4-Pin) |
| Brightness | 1200 Lumens |
| Color Temperature | 3500 Kelvin (White) |
| Color Rendering Index (CRI) | 82 |
| Voltage | 120 Volts |
| Bulb Shape Size | T (Tubular) |
| Material | Copper |
| Item Weight | 2 Pounds |
| Special Feature | Energy Efficient |
| UPC | 046677458225 |
Figure 2: Energy Efficiency Label. This image displays the energy efficiency information for the Philips 458224 lamp, indicating its performance and environmental impact.
9. Warranty and Support
For information regarding warranty coverage, technical support, or service for your Philips Lighting 458224 PL-T Linear Compact Fluorescent Lamp, please refer to the official Philips Lighting website or contact Philips customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
