1. Introduction and Safety Information
Thank you for choosing the ProfiCook PC-SM 1094 Immersion Blender. This manual provides important information for the safe and efficient use of your appliance. Please read it thoroughly before first use and keep it for future reference.
Important Safety Instructions:
- Always unplug the appliance from the power supply before assembly, disassembly, or cleaning.
- Do not immerse the motor unit in water or other liquids.
- Keep hands and utensils out of the container while blending to prevent injury and damage to the appliance.
- Blades are sharp. Handle with extreme care during assembly, disassembly, and cleaning.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Ensure the voltage indicated on the appliance corresponds to your local mains voltage before connecting.
- Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- Avoid contact with moving parts.
- Do not use outdoors.
2. Product Overview and Components
The ProfiCook PC-SM 1094 is a powerful immersion blender designed for efficient blending, chopping, and pureeing. It features a robust stainless steel construction and an ergonomic design for comfortable handling.
Key Features:
- Powerful 1000 W professional motor for long-lasting performance.
- Stainless steel housing with ergonomic soft-touch handle.
- Four-blade stainless steel system for quick and fine results.
- Extra-long blending shaft (approx. 27 cm) suitable for tall and narrow containers.
- Extra-wide blending head for splash-free operation.
- Variable speed control for precise blending.
- Illuminated power switch.
- Removable blending shaft for easy cleaning.
- Space-saving spiral power cable.
Components:
- Motor Unit with Control Panel
- Blending Shaft with 4-Blade System
Image 1: The ProfiCook PC-SM 1094 immersion blender, showcasing its design and a prepared smoothie.
Image 2: Detailed view of the four-blade stainless steel system, designed for efficient blending.
Image 3: A user holding the immersion blender, demonstrating its ergonomic soft-touch handle and sleek design.
3. Setup and First Use
Unpacking and Initial Cleaning:
- Carefully remove all packaging materials.
- Before first use, clean the blending shaft with warm soapy water. Rinse thoroughly and dry.
- Wipe the motor unit with a damp cloth. Do not immerse the motor unit in water.
Assembly:
- Align the blending shaft with the motor unit.
- Push the blending shaft onto the motor unit and twist clockwise until it locks securely into place. Ensure it is firmly attached before use.
4. Operating Instructions
General Operation:
- Prepare your ingredients and place them in a suitable container. The extra-long shaft is ideal for deep pots and narrow vessels.
- Attach the blending shaft to the motor unit as described in the 'Setup' section.
- Plug the appliance into a suitable power outlet (220-240V, 50/60Hz).
- Immerse the blending head into the ingredients before switching on the appliance to prevent splashing.
- Press the power button (blue illuminated) to start blending.
Variable Speed Control:
The immersion blender features variable speed control, allowing you to adjust the blending intensity for different ingredients and desired consistencies.
- Rotate the speed dial located on the top of the motor unit to increase or decrease the blending speed.
- Start with a lower speed for delicate ingredients or to prevent splashing, and gradually increase for tougher ingredients or finer results.
Image 4: The immersion blender in use, demonstrating its capability for blending ingredients directly in a pot.
Image 5: A detailed view of the speed control dial, allowing users to adjust blending intensity.
Image 6: The immersion blender blending in a bowl, illustrating the effectiveness of its extra-wide blending head for splash-free operation.
5. Cleaning and Maintenance
Proper cleaning and maintenance will ensure the longevity and optimal performance of your ProfiCook PC-SM 1094 Immersion Blender.
Cleaning Instructions:
- Always unplug the appliance before cleaning.
- To detach the blending shaft, twist it counter-clockwise and pull it off the motor unit.
- Wash the blending shaft (including the blades) immediately after use with warm soapy water. Use a brush to safely clean around the blades. Rinse thoroughly and dry.
- Wipe the motor unit with a damp cloth. Never immerse the motor unit in water or place it under running water.
- Do not use abrasive cleaning agents, scouring pads, or harsh chemicals, as these can damage the surfaces.
Storage:
Store the cleaned and dried appliance in a dry, safe place, out of reach of children.
6. Troubleshooting
If you encounter any issues with your immersion blender, please refer to the following common problems and solutions before contacting customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | Not plugged in correctly. No power from outlet. Blending shaft not securely attached. | Check power connection. Test outlet with another appliance. Ensure blending shaft is locked into place. |
| Motor runs, but blades do not rotate. | Blending shaft not properly attached to motor unit. | Detach and re-attach the blending shaft, ensuring it clicks into place. |
| Poor blending results or motor struggles. | Too many ingredients. Ingredients are too hard. Speed setting too low. | Reduce the amount of ingredients. Cut hard ingredients into smaller pieces. Increase the speed setting. |
| Excessive splashing during operation. | Blending head not fully immersed. Speed setting too high initially. | Ensure blending head is fully submerged before starting. Begin with a lower speed and gradually increase. |
7. Technical Specifications
| Specification | Detail |
|---|---|
| Brand | ProfiCook |
| Model Number | PC-SM 1094 |
| Color | Black/Silver |
| Power | 1000 Watts |
| Voltage | 220-240 V, 50/60 Hz |
| Material | Stainless Steel |
| Number of Speeds | Variable (5 settings indicated on dial) |
| Product Dimensions (L x W x H) | 0.14 x 0.07 x 0.37 cm (approx. 46.5 cm total length) |
| Item Weight | 1.3 Kilograms |
| Special Feature | Automatic shut-off (as per feature list, though not explicitly detailed in operation) |
8. Warranty and Support
Warranty Information:
This ProfiCook appliance is covered by a manufacturer's warranty for a period of 2 years from the date of purchase, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper use, neglect, or unauthorized repairs.
Customer Support:
For further assistance, technical support, or warranty claims, please contact your retailer or the official ProfiCook customer service. Contact details can typically be found on the manufacturer's website or on the product packaging.
