BANDAI Hobby Resistance X-Wing Star Fighter Model Kit User Manual

1. Product Overview

The BANDAI Hobby Resistance X-Wing Star Fighter is a 1/72 scale plastic model kit based on the iconic starfighter from "Star Wars: The Force Awakens." This kit is designed for enthusiasts to assemble a highly detailed replica of the Resistance X-Wing, featuring faithful recreation of details, including landing gear and movable wings.

Key Features:

• Skill Level: Intermediate
• Wings open and close for dynamic display
• Includes a dedicated display base to replicate various scenes
• Comes with laser effect parts for enhanced realism

2. Safety Precautions

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

This model kit contains small components that may pose a choking hazard. Keep all parts and packaging away from young children. Recommended for ages 15 years and up due to the complexity and small size of parts.

3. Package Contents

Verify that all components are present before beginning assembly:

• 1x Instruction Manual
• 4x Runners (plastic parts frames)
• 1x Water-transfer Decal Sheet
• 1x Marking Sticker Sheet
• 1x Dedicated Display Base
• 1x 1/72 BB-8 Part
• 1x 1/72 Pilot (seated)
• 2x Laser Effect Parts
• 1x Landing Gear Set

4. Assembly Guide (Setup)

This model kit features a snap-together design, meaning no glue is typically required for assembly. Carefully follow the step-by-step diagrams provided in the included instruction manual. Although the manual may be in Japanese, the visual instructions are comprehensive and easy to follow.

1. Preparation: Identify all runners and parts. Use a hobby nipper (not included) to carefully remove parts from the runners, ensuring clean cuts to avoid damaging the plastic.
2. Main Body Assembly: Begin by assembling the core fuselage and cockpit sections as indicated in the manual. Pay close attention to part orientation.
3. Wing Assembly: Assemble the four wings, ensuring the movable mechanisms are correctly installed if applicable.
4. Engine Nacelles: Attach the engine nacelles to the wings.
5. Detail Parts: Install smaller detail parts such as the pilot figure into the cockpit, and the BB-8 unit into its designated slot.
6. Decals/Stickers: Apply the water-transfer decals or marking stickers according to the guide in the manual for added detail and authenticity.
7. Final Assembly: Connect the assembled wings and other major components to the main body.
8. Display Base: Assemble the dedicated display base and attach the completed model to it for display.

Figure 4.1: Fully assembled Resistance X-Wing Star Fighter model on its display base.

5. Operating and Display Features

The Resistance X-Wing Star Fighter model offers several dynamic display options and interactive features:

• Adjustable S-Foils (Wings): The model's wings can be manually adjusted to be in either the open (attack) position or the closed (flight/landing) position. Gently move the wings to switch between modes.
• Display Base: The included dedicated display base allows for various flight poses. The arm of the stand can be articulated to position the model at different angles and heights, simulating in-flight maneuvers.
• Interchangeable Landing Gear: For a grounded display, the model includes a set of landing gear parts that can be attached to the underside of the fuselage and engine nacelles. The landing gear covers can be removed to install these parts.
• Laser Effect Parts: Two clear red laser effect parts are included. These can be inserted into the laser cannons on the wingtips to simulate firing.
• Pilot and BB-8: The seated pilot figure can be placed inside the cockpit, and the 1/72 scale BB-8 part fits into the droid slot behind the cockpit. These parts can be removed or left in place as desired.

Figure 5.1: Model displayed with laser effect parts attached to the wing cannons.

Figure 5.2: Detailed view of the cockpit with the canopy open, revealing the pilot figure.

Figure 5.3: The model can be displayed in a landed configuration using the included landing gear.

6. Maintenance and Care

Proper care will help maintain the appearance and integrity of your model kit:

• Cleaning: Gently dust the model regularly using a soft, dry brush or a microfiber cloth. Avoid using water, harsh chemicals, or abrasive cleaners, as these can damage the plastic or paint/decals.
• Storage: Store the model in a cool, dry environment away from direct sunlight and extreme temperatures. Prolonged exposure to sunlight can cause plastic to yellow or decals to fade.
• Handling: Always handle the model by its sturdy parts, such as the main fuselage or wings, to avoid putting stress on delicate components. Avoid dropping the model.
• Decals/Stickers: If water-slide decals or stickers have been applied, avoid rubbing or excessive moisture on these areas to prevent peeling or damage.

7. Troubleshooting

Here are some common issues encountered during model kit assembly and display, along with potential solutions:

• Parts Not Fitting:
  Ensure you are using the correct parts as indicated by the instruction manual's diagrams and part numbers. Some snap-fit parts may require firm, even pressure to click into place. Do not force parts, as this can cause breakage. Check for any excess plastic (flash) on the connection points and carefully trim if necessary.
• Loose Parts:
  If a snap-fit connection feels too loose, a very small amount of plastic model cement (not included) can be applied to the connection point to secure it. Use sparingly to avoid damaging the plastic.
• Decal/Sticker Peeling or Bubbling:
  For water-slide decals, ensure the surface is clean and smooth before application. Use a decal setting solution to help the decal conform to the surface and adhere better. For stickers, ensure the surface is completely dry and free of dust or oils before applying. Press firmly to remove air bubbles.
• Missing Parts:
  Thoroughly check all runners and the inside of the packaging. Small parts can sometimes become dislodged during shipping. If a part is genuinely missing, contact BANDAI Hobby customer support with your proof of purchase and the specific part number.

8. Product Specifications

9. Warranty and Customer Support

As a plastic model kit, this product typically does not come with an extensive warranty beyond initial manufacturing defects. BANDAI Hobby products are known for their high quality and precision.

For any issues related to missing or defective parts, please retain your proof of purchase and contact BANDAI Hobby customer support directly. They can provide assistance with part replacement or guidance on assembly challenges.

For further information or to find contact details, please visit the official BANDAI Hobby website or the website of your regional distributor.