Rolex Submariner "Hulk" Green Dial Men's Luxury Watch

Introduction

Welcome to the user manual for your Rolex Submariner "Hulk" Green Dial Men's Luxury Watch, Model 116610LV. This iconic timepiece is renowned for its robust construction, exceptional precision, and distinctive green dial and Cerachrom bezel. Designed for professional divers, it combines functionality with timeless elegance, making it suitable for both underwater exploration and everyday wear. This manual provides essential information on setting up, operating, maintaining, and troubleshooting your watch to ensure its longevity and optimal performance.

Front view of the Rolex Submariner 'Hulk' watch, showcasing its distinctive green dial and bezel.

Setup

Before wearing your Rolex Submariner, it is important to properly set the time and date, and ensure the watch is adequately wound.

1. Winding the Watch

1. Unscrew the Winding Crown: Gently unscrew the Triplock winding crown counter-clockwise until it springs free from the case.
2. Manual Winding: Turn the crown clockwise approximately 25-30 times. This will fully wind the mainspring, providing the watch with its maximum power reserve.
3. Automatic Winding: Once wound, the watch will continue to wind itself automatically through the movement of your wrist while worn.

2. Setting the Time and Date

1. Pull the Crown to Position 2: After unscrewing, pull the crown out to the first notch. This is the quick-set date position. Turn the crown clockwise or counter-clockwise to set the date.
2. Pull the Crown to Position 3: Pull the crown out to the second notch. The seconds hand will stop, allowing for precise time setting. Turn the crown to set the hour and minute hands. Ensure the AM/PM is correctly set by observing when the date changes (it should change around midnight).
3. Screw Down the Crown: Once the time and date are set, push the crown back in and screw it down clockwise firmly against the case. This ensures the watch's water resistance.

Side profile of the Rolex Submariner 'Hulk', highlighting the winding crown and case.

Operating the Watch

Your Rolex Submariner is engineered for high performance and durability, especially in demanding environments.

1. Unidirectional Rotatable Bezel

• The Submariner features a unidirectional rotatable bezel with 60-minute graduations. This allows divers to accurately monitor their dive time and decompression stops.
• To use, align the zero marker on the bezel with the minute hand at the start of your dive. The elapsed time can then be read directly from the bezel.
• The unidirectional design prevents accidental rotation in the wrong direction, which could lead to an overestimation of remaining dive time.

2. Chromalight Display

• The hour markers and hands are coated with a luminescent material that emits a long-lasting blue glow in dark conditions, ensuring excellent legibility.

Close-up of the Rolex Submariner 'Hulk' dial, showing the luminous hour markers and hands.

Maintenance

Proper care and maintenance will preserve the beauty and functionality of your Rolex Submariner for generations.

1. Cleaning Your Watch

• After exposure to saltwater or chlorine, rinse your watch thoroughly with fresh water.
• Clean the watch regularly using a soft cloth and soapy water. Ensure the winding crown is fully screwed down before cleaning.
• Dry the watch with a soft, lint-free cloth.

2. Regular Servicing

• Rolex recommends having your watch serviced approximately every 10 years by an authorized Rolex service center.
• Regular servicing ensures the movement remains lubricated, gaskets are replaced, and water resistance is maintained.

3. General Care

• Avoid exposing your watch to extreme temperatures (above 60°C / 140°F or below 0°C / 32°F) or sudden temperature changes.
• Protect your watch from strong magnetic fields, which can affect its accuracy.
• While robust, avoid unnecessary shocks or impacts to the watch.

Rear view of the Rolex Submariner 'Hulk', displaying the solid Oystersteel case back.

Troubleshooting

If you encounter any issues with your Rolex Submariner, please refer to the following common troubleshooting tips. For complex issues, always consult an authorized Rolex service center.

• Watch Not Running: Ensure the watch is fully wound. If it has been stationary for an extended period, manually wind it by turning the crown clockwise 25-30 times. If the issue persists, it may require servicing.
• Date Not Changing at Midnight: This usually indicates the watch's time is set incorrectly for AM/PM. Pull the crown to Position 3 and advance the hour hand past 12 o'clock to see if the date changes. Adjust accordingly.
• Condensation Under Crystal: If you notice condensation inside the watch, it indicates a breach in water resistance. Immediately take the watch to an authorized Rolex service center to prevent further damage to the movement.
• Loss of Accuracy: A slight deviation in timekeeping is normal for mechanical watches. However, if your watch is consistently gaining or losing significant time, it may require regulation or servicing.

Specifications

Warranty and Support

Your Rolex watch is covered by a five-year international guarantee, covering proper functioning and manufacturing defects. This guarantee is a testament to Rolex's commitment to quality and reliability.

1. Activating Your Guarantee

• The guarantee card provided with your watch is activated by the Official Rolex Retailer at the time of purchase. Keep this card in a safe place as it is essential for any warranty claims.

2. Contacting Support

For any service, repair, or warranty inquiries, please contact an Official Rolex Retailer or an authorized Rolex Service Centre. You can find the nearest authorized location by visiting the official Rolex website:

www.rolex.com

Only authorized Rolex Service Centres are equipped with the necessary tools, training, and genuine Rolex parts to maintain your watch to the brand's exacting standards.