1. Introduction
Thank you for choosing the Tzumi Super Bass Mini Wireless Speaker. This compact and portable speaker is designed to deliver enhanced audio quality with convenient wireless connectivity. Please read this manual thoroughly to ensure proper use and to maximize your listening experience.
Figure 1: Tzumi Super Bass Mini Wireless Speaker in its packaging, highlighting its features.
2. Setup
2.1 Charging the Speaker
Before initial use, fully charge the speaker.
- Connect the small end of the included USB charging cable to the charging port on the speaker.
- Connect the larger end of the USB cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate, typically red, during charging.
- Once fully charged, the indicator light will change color or turn off (refer to specific product behavior if different). A full charge typically takes approximately 2-3 hours.
Figure 2: Side view of the speaker, illustrating the location of the charging port and other connections.
2.2 Bluetooth Pairing
To connect your speaker wirelessly to a device:
- Ensure the speaker is fully charged and powered off.
- Press and hold the power button (location may vary, typically on the side or bottom) for a few seconds until you hear an audible prompt or see a blinking LED light, indicating it is in pairing mode.
- On your audio device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "Tzumi Super Bass" or a similar name from the list of found devices.
- Once paired, the speaker will emit a confirmation sound, and the LED indicator will typically stop blinking and remain solid.
- The speaker should automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.
2.3 Line-In (AUX) Connection
For devices without Bluetooth, or for a wired connection:
- Connect one end of a 3.5mm audio cable (not included) to the AUX-in port on the speaker.
- Connect the other end of the 3.5mm audio cable to the headphone jack or audio output port of your device.
- The speaker will automatically switch to AUX mode, or you may need to press a mode button (if available).
3. Operation
3.1 Power On/Off
- To power on: Press and hold the power button until the indicator light illuminates and you hear a power-on sound.
- To power off: Press and hold the power button again until the indicator light turns off and you hear a power-off sound.
3.2 Volume Control
Volume is primarily controlled via your connected audio device. Some speakers may have physical volume buttons (+/-) on the unit itself.
- Increase Volume: Press the '+' button (if available) or increase volume on your connected device.
- Decrease Volume: Press the '-' button (if available) or decrease volume on your connected device.
3.3 Audio Playback
Once connected via Bluetooth or AUX, audio playback is controlled directly from your source device.
- Play/Pause: Use the play/pause controls on your connected device. Some speakers may have a multi-function button for this purpose.
- Skip Tracks: Use the track navigation controls on your connected device.
Figure 3: Top view of the speaker, showing the speaker grille where sound is emitted.
4. Maintenance
4.1 Cleaning
- Wipe the speaker with a soft, dry cloth.
- Do not use abrasive cleaners, waxes, or solvents.
- Avoid getting moisture into any openings. The speaker is not waterproof.
4.2 Storage
- Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery periodically (e.g., every 3-6 months) to maintain battery health.
4.3 Battery Care
- Do not expose the battery to excessive heat, such as direct sunlight or fire.
- Do not attempt to replace the battery yourself. Contact customer support if battery issues arise.
- Dispose of the battery according to local regulations.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted. | Charge the speaker fully. |
| Cannot pair via Bluetooth. | Speaker is not in pairing mode; device Bluetooth is off; speaker is already paired to another device; device is out of range. | Ensure speaker is in pairing mode. Turn on Bluetooth on your device. Disconnect from other devices. Move device closer to speaker (within 33 feet/10 meters). |
| No sound or low volume. | Volume on speaker or device is too low; speaker is not properly connected; incorrect input mode. | Increase volume on both speaker and connected device. Re-pair Bluetooth or re-connect AUX cable. Ensure correct input mode is selected. |
| Sound distortion or crackling. | Device is too far from speaker; interference; low battery. | Move device closer to speaker. Avoid obstacles. Charge the speaker. |
6. Specifications
- Model: 1886 B/JCP
- Brand: Tzumi
- Connectivity Technology: Bluetooth
- Speaker Maximum Output Power: 5 Watts
- Power Source: Battery Powered
- Item Weight: 10.4 ounces (approx. 295 grams)
- Package Dimensions: 4.4 x 3.8 x 2.9 inches (approx. 11.2 x 9.7 x 7.4 cm)
- Recommended Uses: Music
- Compatible Devices: Smartphone
- Waterproof: No
- UPC: 817243018866
- Manufacturer: Tzumi
- Date First Available: March 3, 2015
7. Warranty & Support
For warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. Tzumi products typically come with a limited warranty.
For technical support or further assistance, please visit the official Tzumi website or contact their customer service department.
Manufacturer: Tzumi
Website: www.tzumi.com (Note: This is a placeholder URL, please verify the official Tzumi support website.)
