DEWALT 20V MAX* XR Leaf Blower (DCBL722P1) Instruction Manual

1. Important Safety Information

WARNING: This product produces noise above 70 dB(A). Prolonged exposure may cause hearing damage. Always wear appropriate hearing protection. Be aware of your surroundings and others nearby when using this product to avoid injury from propelled debris.

Always read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

• Wear eye protection, respiratory protection, and hearing protection.
• Store the tool indoors when not in use.
• Use only with DEWALT 20V MAX* batteries.
• Keep children and bystanders away while operating.
• Do not operate in wet conditions.

2. Product Overview

The DEWALT 20V MAX* XR Leaf Blower (DCBL722P1) is designed for efficient debris clearing with its powerful brushless motor. This handheld blower offers a balance of performance and user comfort, making it suitable for various outdoor tasks.

Figure 2.1: DEWALT 20V MAX* XR Leaf Blower, including the main unit, 20V MAX* XR 5.0Ah battery, and charger.

Key Features:

• Up to 450 CFM of air volume and up to 125 Mph with concentrator.
• Innovative axial fan design that maximizes on air output and run time.
• Low noise during operation - 62 dB(A), ideal for noise sensitive regions and properties.
• High-efficiency brushless motor helps extend run time and motor life.
• Lightweight and ergonomic design allows for easy control and arm movement.
• Variable trigger and speed lock for precise power control.

3. Setup

3.1 Attaching the Concentrator Nozzle

The blower comes with a removable concentrator nozzle. Align the nozzle with the blower's air outlet and push firmly until it clicks into place. Ensure it is securely attached before operation.

Figure 3.1: The removable concentrator nozzle with a built-in scraper for enhanced debris removal.

3.2 Battery Installation and Charging

The DEWALT DCBL722P1 operates on a 20V MAX* Lithium Ion battery. Ensure the battery is fully charged before first use.

1. To install the battery, align the battery pack with the receptacle on the blower handle and slide it in until it locks securely.
2. To remove the battery, press the release button on the battery pack and slide it out.
3. To charge the battery, insert it into the provided DEWALT charger (DCB115). Refer to the charger's manual for specific charging instructions and indicator lights.

Figure 3.2: Battery inserted into the blower, with visible battery charge indicator lights.

Figure 3.3: Battery removed from the blower, illustrating the battery compartment.

4. Operating Instructions

4.1 Starting and Stopping the Blower

• To start the blower, ensure a charged battery is installed, then depress the variable speed trigger.
• To stop the blower, release the variable speed trigger.

4.2 Variable Speed Control and Speed Lock

The blower features a variable speed trigger and a speed lock for precise control over air output.

• Variable Speed Trigger: The amount of trigger depression controls the air speed. Press lightly for lower speeds, and fully for maximum speed.
• Speed Lock: For continuous operation at a desired speed, depress the trigger to the desired speed, then push the speed lock lever forward. To disengage the speed lock, depress the trigger fully and release.

Figure 4.1: Detail of the variable speed trigger and speed lock for customized airflow.

4.3 General Operation Tips

• Always direct the air flow away from yourself and others.
• Use the concentrator nozzle for stubborn debris or to create a focused air stream.
• For optimal battery life, use lower speeds for lighter debris and only engage full power when necessary.
• Avoid operating the blower in dusty conditions without proper respiratory protection.

5. Maintenance

5.1 Cleaning

• Always remove the battery pack before performing any cleaning or maintenance.
• Use a clean, damp cloth to wipe down the exterior of the blower. Do not use harsh chemicals or abrasive cleaners.
• Keep the air intake vents clear of debris to ensure proper airflow and prevent overheating.

5.2 Storage

• Store the blower in a cool, dry place, away from direct sunlight and moisture.
• Remove the battery pack from the blower before storing for extended periods.
• Store battery packs in a cool, dry location, away from metal objects that could short the terminals.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information, service, or technical support, please refer to the official DEWALT website or contact DEWALT customer service directly. Keep your proof of purchase for warranty claims.

Visit the official DEWALT website: DEWALT Store