1. Introduction
Thank you for choosing the hofstein Biot LED Floor Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before assembly and operation, and retain them for future reference.
The Biot LED Floor Lamp features a main uplight with 18 Watts and 1620 Lumens, and an adjustable reading light with 5 Watts and 450 Lumens, both emitting a warm white light at 3000 Kelvin. It is designed for indoor use and includes a stepless dimmer function.
Image 1.1: Fully assembled hofstein Biot LED Floor Lamp.
2. Safety Instructions
- Ensure the power supply is disconnected before assembly, cleaning, or maintenance.
- This product is for indoor use only. Do not expose to moisture or extreme temperatures.
- Do not attempt to modify or repair the lamp. Repairs should only be performed by qualified personnel.
- The LED bulbs are non-replaceable. Do not attempt to remove or replace them.
- Keep packaging materials out of reach of children to prevent choking hazards.
- Position the lamp on a stable, level surface to prevent tipping.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, contact customer support before proceeding.
- Lamp Base
- Main Lamp Pole Sections (typically 2-3 sections)
- Uplight Head with integrated LED
- Reading Light Arm with integrated LED
- Power Cable with Foot Switch
- Assembly Tools (if applicable, e.g., small wrench)
Image 3.1: All components included in the package.
4. Setup and Assembly
Follow these steps to assemble your hofstein Biot LED Floor Lamp:
- Attach the Lamp Pole Sections: Carefully screw the pole sections together, starting from the base. Ensure each section is securely tightened to prevent wobbling.
- Connect the Uplight Head: Attach the uplight head to the top pole section. Ensure the electrical connection is firm.
- Install the Reading Light: Secure the reading light arm to the designated point on the main pole. The arm is adjustable for optimal positioning.
- Position the Lamp: Place the assembled lamp in your desired location, ensuring it is stable and the power cable can reach an outlet without tension.
- Connect to Power: Plug the power cable into a standard electrical outlet.
Image 4.1: Dimensional diagram and key components for assembly.
5. Operating Instructions
The hofstein Biot LED Floor Lamp is operated via a foot switch located on the power cable.
- Power On/Off: Press the foot switch once to turn the lamp on or off.
- Dimming Function: The lamp features a stepless dimmer. To adjust brightness, press and hold the foot switch. The light intensity will gradually increase or decrease. Release the switch when the desired brightness is reached.
- Adjusting the Reading Light: The reading light arm is flexible. Gently bend the arm to direct the light as needed.
Image 5.1: Visual representation of the dimming capabilities from 100% to off.
Image 5.2: Detail of the integrated stepless dimmer switch.
6. Maintenance
To ensure the longevity and optimal performance of your lamp, follow these maintenance guidelines:
- Cleaning: Disconnect the lamp from the power supply before cleaning. Use a soft, dry cloth to wipe the metal and glass surfaces. Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish.
- Inspection: Periodically check the power cable and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
- LED Care: The integrated LED modules are designed for long life and do not require replacement. Avoid touching the LED surfaces directly.
7. Troubleshooting
If you encounter issues with your lamp, refer to the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | No power supply | Check if the plug is securely inserted into the outlet. Test the outlet with another device. |
| Lamp flickers or dims unexpectedly | Loose connection or power fluctuation | Ensure all pole sections are tightly screwed. Try plugging into a different outlet. |
| Dimming function not working | Incorrect operation | Ensure you are pressing and holding the foot switch for dimming, not just pressing it briefly. |
If the problem persists after attempting these solutions, please contact hofstein customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | hofstein |
| Model Number | H165424 |
| Product Dimensions (L x W x H) | 28 x 28 x 181 cm |
| Material | Metal, Glass |
| Color | Antique Brass |
| Style | Country, Modern |
| Number of Bulbs | 2 (integrated LED) |
| Main Uplight Power | 18 Watts |
| Main Uplight Luminous Flux | 1620 Lumens |
| Reading Light Power | 5 Watts |
| Reading Light Luminous Flux | 450 Lumens |
| Total Luminous Flux | 2070 Lumens |
| Color Temperature | 3000 Kelvin (Warm White) |
| Dimmable | Yes (Stepless dimmer via foot switch) |
| Bulbs Replaceable | No (Integrated LED) |
| Switch Type | Foot Switch |
| Energy Efficiency Class | F |
| Specific Uses | Indoor use |
Image 8.1: Energy efficiency label for the product.
9. Warranty and Support
hofstein products are manufactured with quality and durability in mind. For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official hofstein website. You can also contact the seller directly through the platform where the purchase was made.
For further assistance, please visit the hofstein Brand Store.