Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Rev-A-Shelf 4WCSC-1550DM-1 Single 50 Qt Pullout Trash Can. Please read these instructions carefully before beginning installation or use to ensure proper function and longevity of your product.
The Rev-A-Shelf pullout waste container system is designed to maximize kitchen space by keeping your waste and recycling container hidden yet easily accessible within your kitchen cabinet. It features a durable maple wood construction and a soft-close slide system for smooth operation.
Safety Information
- Always wear appropriate safety gear, such as safety glasses, during installation.
- Ensure the cabinet is stable and securely mounted before installing the unit.
- Do not overload the waste container. Refer to the specifications for maximum capacity.
- Keep small children and pets away from the installation area.
- Exercise caution when using power tools.
Setup and Installation
1. Measure Your Cabinet Space
Accurate measurements are crucial for proper fit and function. This unit is designed for a cabinet opening width of 12" to 15" and requires a full-height cabinet (no drawer above the door).
Image: Cabinet Measurement Guide
- Width (W): Measure the minimum width of your cabinet opening.
- Depth (D): Measure from the back of the cabinet door to the back wall. Ensure there are no obstructions like plumbing.
- Height (H): Measure the minimum height of your cabinet opening.
Important: Consider any potential obstructions such as door hinges or plumbing that might interfere with the pullout unit's movement.
Video: How to Measure Your Cabinet
Video: This video demonstrates how to accurately measure your cabinet opening to ensure compatibility with Rev-A-Shelf products, covering both face frame and frameless cabinet types.
2. Tools Needed for Installation
- Power Drill
- Pencil
- Screwdriver
- Tape Measure
3. Installation Steps
The unit comes with a pre-assembled maple wood frame and mounting hardware for straightforward installation. Follow the specific instructions provided in the packaging for detailed steps, which typically involve:
- Positioning the unit: Place the pullout unit inside the cabinet opening.
- Securing the base: Mount the unit to the cabinet floor using the provided screws.
- Attaching the door: Use the included adjustable door-mount brackets to attach your cabinet door to the pullout unit. Ensure the door is level and aligned.
Image: Rev-A-Shelf Pullout Unit with Bin
Operating Instructions
Using the Pullout System
To access the waste container, gently pull the cabinet door attached to the unit. The BLUMotion undermount soft-close full-extension concealed slide system will allow the unit to glide smoothly out of the cabinet.
Image: Pullout Unit Partially Extended
To close the unit, gently push the cabinet door back into place. The soft-close mechanism will engage, ensuring a quiet and smooth return to the closed position.
Image: Soft-Close Slides Feature
Changing the Waste Bin
The 50-quart waste container can be easily lifted out of the wood frame for emptying and cleaning. Simply pull the unit out fully, grasp the bin by its handles, and lift it vertically.
Image: Pullout Unit Fully Extended with Removable Bin
Maintenance and Care
Cleaning the Unit
- Wood Frame: Wipe the maple wood frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Dry immediately.
- Waste Bin: The plastic waste bin can be washed with soap and water. Ensure it is completely dry before placing it back into the unit.
- Slides: Periodically check the soft-close slides for any debris. Wipe them clean with a dry cloth. Avoid lubricating the slides unless specifically instructed by the manufacturer.
General Care
- Ensure the unit is not subjected to excessive force when pulling or pushing.
- Regularly check all mounting screws to ensure they remain tight.
- Optional Rev-A-Shelf lids are available separately to help contain odors and keep the bin contents out of sight.
Image: Optional Waste Container Lids (Sold Separately)
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not slide smoothly. | Debris in slides, misaligned installation, overloaded bin. | Clean slides, check for proper alignment and re-adjust if necessary, reduce bin load. |
| Soft-close mechanism not engaging. | Obstruction, damaged slides, improper installation. | Check for obstructions, ensure unit is installed level, contact customer support if slides are damaged. |
| Cabinet door is not aligned with adjacent doors. | Door-mount brackets need adjustment. | Adjust the door-mount brackets as per installation instructions to achieve proper alignment. |
| Bin is difficult to remove or insert. | Bin is not seated correctly, debris in the frame. | Ensure the bin is placed squarely in the frame. Clear any debris from the bottom of the frame. |
Specifications
- Model Number: 4WCSC-1550DM-1
- Product Dimensions (W x D x H): 12" x 22.03" x 23.38"
- Designed for Cabinet Opening Width: 12" to 15"
- Capacity: 50 Quarts (Single Bin)
- Material: Maple Wood (Frame), Plastic (Bin)
- Finish Type: Natural Maple
- Opening Mechanism: Pull-Out
- Special Feature: BLUMotion Undermount Soft-Close Full-Extension Concealed Slide System
- Included: (1) Silver 50 quart waste container with Wood frame and mounting hardware
Image: Detailed Product Specifications
Warranty Information
Rev-A-Shelf products are manufactured to high-quality standards and are backed by a limited lifetime warranty against defects in material and workmanship. For specific warranty details, terms, and conditions, please refer to the warranty card included with your product or visit the official Rev-A-Shelf website.
Customer Support
If you have any questions regarding the installation, operation, or maintenance of your Rev-A-Shelf pullout trash can, please contact Rev-A-Shelf customer support. Contact information can typically be found on the product packaging or the official Rev-A-Shelf website.
Online Resources: For additional product information, installation videos, and FAQs, please visit the Rev-A-Shelf Store on Amazon.
