Plantronics Voyager Legend Bluetooth Headset User Manual

Introduction

The Plantronics Voyager Legend is a Bluetooth headset designed for clear communication and ease of use. It features advanced noise and wind cancellation, voice command capabilities, and smart sensor technology to enhance your calling experience. This manual provides detailed instructions for setting up, operating, and maintaining your headset.

Product Overview

The Voyager Legend headset integrates multiple features for optimal performance.

Figure 1: Plantronics Voyager Legend Bluetooth Headset. This image displays the headset's over-ear design, microphone boom, and integrated control buttons for volume and power.

Key features include:

• Triple Microphones: Designed to cancel noise and wind for clear audio.
• Voice Commands: Allows for hands-free control, such as answering calls.
• Smart Sensor Technology: Detects when the headset is worn to automatically answer calls or route audio.
• Caller Announce: Announces the name of incoming callers.

Package Contents

Upon opening the package, verify that all components are present.

Figure 2: Plantronics Voyager Legend product packaging. The box highlights features such as Smart Call Routing, Precision Audio, Voice Commands, and Caller Announce.

The standard package typically includes:

• Plantronics Voyager Legend Bluetooth Headset
• USB Charging Cable
• Ear tips (various sizes)
• User Guide (this document)

Setup

1. Charging the Headset

Before initial use, fully charge your headset. Connect the USB charging cable to the headset's charging port and plug the other end into a USB power source (e.g., computer, wall adapter). The LED indicator on the headset will show charging status. A full charge provides approximately 7 hours of talk time.

2. Pairing with a Bluetooth Device

1. Activate Pairing Mode: With the headset off, press and hold the Power button until the LED flashes red and blue, indicating pairing mode.
2. Enable Bluetooth on Your Device: On your smartphone or other Bluetooth-enabled device, go to the Bluetooth settings menu.
3. Select the Headset: From the list of available devices, select "PLT_Legend" or "Plantronics Legend".
4. Confirm Pairing: If prompted for a passcode, enter "0000" (four zeros). Once paired, the headset LED will stop flashing and you will hear a confirmation tone.

Operating Instructions

Power On/Off

• To power on, slide the Power switch to the "on" position.
• To power off, slide the Power switch to the "off" position.

Making and Receiving Calls

• Answering a Call: When an incoming call is announced, say "Answer" or tap the Call button.
• Ending a Call: Tap the Call button.
• Rejecting a Call: Say "Ignore" when an incoming call is announced, or press and hold the Call button for 2 seconds.
• Redialing: Double-tap the Call button to redial the last number.

Volume Control

Use the Volume Up (+) and Volume Down (-) buttons located on the headset to adjust the listening volume during calls or media playback.

Voice Commands

The Voyager Legend supports various voice commands. To activate voice commands, tap the Voice button (usually located on the microphone boom). You can then say commands such as "Check battery," "Redial," or "Pair mode."

Maintenance

• Cleaning: Gently wipe the headset with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the headset regularly, even if not in use for extended periods.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official Plantronics website or contact their customer service. Keep your proof of purchase for warranty claims.

Online Support: Visit the Plantronics Support Page for FAQs, troubleshooting guides, and software downloads.