Moen Brantford 1/2-Inch Diverter Tub Spout

Product Overview

The Moen 3814ORB Brantford Diverter Tub Spout is designed to restore your bathing area's functionality and aesthetic. Featuring an Oil-Rubbed Bronze finish, it offers a rich, dark brown appearance with striking light and dark accents, complementing traditional bathroom designs. This tub spout includes a lift rod for diverting water flow between the tub and a showerhead, ensuring versatile use.

Constructed from corrosion-resistant metal, this spout is built for durability and designed for straightforward installation. It accommodates most bathtubs with its 7.25-inch length.

Image: Moen Brantford 1/2-Inch Diverter Tub Spout, Oil Rubbed Bronze finish.

Setup and Installation

This section provides general guidance for installing the Moen 3814ORB tub spout. While designed for hassle-free installation, professional plumbing assistance is recommended if you are unfamiliar with plumbing work.

Important Note on Connection Type:

Please be aware that despite the product title, this tub spout features a threaded connection, not a slip-fit connection. Ensure your existing plumbing is compatible or prepared for a threaded installation. This may require a brass nipple and appropriate coupler if replacing a rear-threaded spout.

1. Prepare the Area: Turn off the main water supply to your bathroom. Drain any remaining water from the pipes by opening the existing tub spout and shower valve.
2. Remove Old Spout: Depending on your current spout type, you may need to unscrew it or loosen a set screw underneath. Clean the pipe and wall area thoroughly.
3. Prepare the Pipe: Ensure the pipe extending from the wall is clean and free of debris. For threaded connections, apply plumber's tape (Teflon tape) clockwise around the threads of the pipe to ensure a watertight seal.
4. Install New Spout: Carefully thread the Moen 3814ORB tub spout onto the pipe. Turn clockwise until it is hand-tight, then use a wrench to tighten it an additional quarter to half turn, ensuring the spout is level and facing forward. Do not overtighten.
5. Test for Leaks: Slowly turn the main water supply back on. Check for any leaks around the base of the new tub spout. If leaks occur, turn off the water, tighten slightly, and re-test.

Operating Instructions

The Moen Brantford Diverter Tub Spout is designed for simple operation to switch between tub filling and showering.

• Tub Filling: To fill the bathtub, ensure the diverter lift rod on top of the spout is in the down position. Water will flow directly from the spout into the tub.
• Showering: To divert water to your showerhead, pull the lift rod upwards. This will redirect the water flow from the tub spout to the connected showerhead. Once you are finished showering, push the lift rod back down to resume water flow to the tub spout.

Maintenance and Care

To maintain the beauty and functionality of your Moen Brantford Oil-Rubbed Bronze tub spout, follow these care guidelines:

• Regular Cleaning: Clean the spout regularly with a soft, damp cloth. For stubborn spots, use a mild soap and water solution. Rinse thoroughly and dry with a soft cloth to prevent water spots.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, harsh chemicals, ammonia-based products, or polishing agents, as these can damage the Oil-Rubbed Bronze finish and void the warranty.
• Protect the Finish: The Oil-Rubbed Bronze finish is designed to be durable and corrosion-resistant. Avoid scratching the surface with sharp objects or abrasive materials.
• Check for Leaks: Periodically inspect the connection point for any signs of leaks. Address any leaks promptly to prevent water damage.

Troubleshooting

This section addresses common issues you might encounter with your tub spout.

Specifications

• Brand: Moen
• Model Name: Brantford
• Part Number: 3814ORB
• Color: Oil Rubbed Bronze
• Material: Metal
• Mounting Type: Wall Mount
• Spout Length: 7.25 inches (accommodates most bathtubs)
• Connection Type: Threaded (1/2-Inch)
• Included Components: Tub Spout
• Item Weight: 1.37 pounds
• Product Dimensions: 11.75 x 5.88 x 3.69 inches
• Special Features: Intricate Architectural Details, Diverter Function
• UPC: 026508251065

Warranty and Support

The Moen 3814ORB Brantford Diverter Tub Spout is backed by Moen's Limited Lifetime Warranty. This warranty covers defects in material and manufacturing for the original consumer purchaser.

For detailed warranty information, product support, or to contact customer service, please visit the official Moen website or refer to the warranty documentation included with your purchase.

Moen Official Website: www.moen.com