Grado SR80e Prestige Series Headphones User Manual

Introduction

The Grado SR80e Prestige Series Headphones are designed to deliver superb sound quality with an open-stage experience. Featuring an upgraded driver design and comfortable ear cushions, these headphones provide an improved bass resonance and overall detailed audio. Their open-back design helps prevent heat buildup during extended listening sessions, ensuring comfort.

Figure 1: Front view of the Grado SR80e Prestige Series Headphones, showcasing the open-back earcups and adjustable headband.

What's in the Box

Your Grado SR80e Prestige Series Headphones package includes the following items:

• 1 pair of Grado SR80e headphones
• Mini stereo plug with 1/4-inch adaptor

Setup

1. Connect the Headphones: Plug the 3.5mm mini stereo plug into your audio device. If your device requires a larger connection, use the included 1/4-inch adaptor.
2. Adjust the Headband: Gently slide the earcups up or down along the metal bands until they rest comfortably over your ears.
3. Position the Ear Cushions: Ensure the large ear cushions fully cover your ears for optimal sound and comfort. The open-back design allows for air circulation, preventing your ears from getting hot during prolonged use.

Figure 2: Side view of the Grado SR80e headphones, highlighting the adjustable headband and earcups.

Operating Instructions

The Grado SR80e headphones are designed for straightforward operation. Once connected to your audio source, simply adjust the volume on your device to your preferred listening level. The open-back design provides a natural soundstage and allows you to remain somewhat aware of your surroundings while enjoying your audio.

The headphones feature a standard copper voice coil wire and connecting cord, ensuring reliable audio transmission. The vented diaphragm and absence of a resonant air chamber contribute to the clear and detailed sound profile.

Maintenance

To ensure the longevity and optimal performance of your Grado SR80e headphones, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe down the exterior of the headphones. Avoid using harsh chemicals or abrasive materials.
• Ear Cushions: The large ear cushions are designed for comfort and can be gently removed for cleaning or replacement if necessary. Refer to the manufacturer's instructions for specific guidance on removing and reattaching ear cushions.
• Cable Care: The standard copper connecting cord is durable. Avoid sharp bends or excessive pulling to prevent damage.
• Storage: Store your headphones in a clean, dry place away from extreme temperatures and direct sunlight when not in use.

Troubleshooting

If you encounter any issues with your Grado SR80e headphones, consider the following:

• No Sound:
  • Ensure the 3.5mm plug (or 1/4-inch adaptor) is fully inserted into your audio device.
  • Check the volume level on your audio device.
  • Test the headphones with a different audio device to rule out a device-specific issue.
• Poor Sound Quality:
  • Verify the audio source is playing high-quality audio.
  • Ensure the ear cushions are properly seated over your ears.
  • Inspect the cable for any visible damage.
• Discomfort:
  • Adjust the headband and earcup position to find the most comfortable fit.
  • The open-back design is intended to minimize heat, but if discomfort persists, take short breaks.

For further assistance, please refer to the manufacturer's official support channels.

Specifications

Warranty and Support

All warranty, legal, and other product concerns should be referred to the manufacturer, GRADO. Please visit their official website or contact their customer support for detailed warranty information and assistance.