Introduction
This manual provides detailed instructions for the safe and efficient use of your VARTA LCD Plug Charger. Please read this manual thoroughly before operating the device and keep it for future reference.
Safety Information
To ensure safe operation and prevent damage, observe the following safety guidelines:
- Use only rechargeable NiMH batteries. Do not attempt to charge alkaline or other non-rechargeable batteries, as this may cause leakage, rupture, or explosion. The charger includes alkaline battery detection.
- Do not disassemble, modify, or short-circuit the charger or batteries.
- Keep the charger away from water, moisture, and high temperatures.
- Ensure proper polarity when inserting batteries. The charger features wrong polarity protection.
- Unplug the charger from the power outlet when not in use or before cleaning.
- The charger is equipped with a Minus Delta U cut-off and a safety timer to prevent overcharging.
- In case of short-circuit, the charger will automatically shut off.
- Keep out of reach of children.
Package Contents
Verify that all items are present in your package:
- 1 x VARTA LCD Plug Charger
- 4 x VARTA AA 2100 mAh Rechargeable Batteries (Ready-to-Use)
Product Overview

Image: The VARTA LCD Plug Charger, featuring a clear LCD display at the top, four slots for AA/AAA batteries, and a 9V battery slot. The image also highlights key features like USB output, bad cell detection, Minus Delta V cut-off, timer cut-off, and wrong polarity protection. Four VARTA AA 2100 mAh rechargeable batteries are shown inserted.
The VARTA LCD Plug Charger is designed for convenient and safe charging of various battery types. Key components include:
- LCD Display: Shows the charging status for each battery slot, 9V battery, and USB output. The display is backlit for easy readability.
- AA/AAA Battery Slots: Four slots for charging AA or AAA NiMH rechargeable batteries.
- 9V Battery Slot: One slot for charging a 9V NiMH rechargeable battery.
- USB Output Port: Located on the side, allows charging of USB-powered devices.
- Integrated Wall Plug: For direct connection to a power outlet.
Setup
- Unpack: Carefully remove the charger and included batteries from the packaging.
- Inspect: Check the charger and batteries for any visible damage. Do not use if damaged.
- Plug In: Insert the charger directly into a standard wall power outlet. The LCD display will illuminate briefly.
Operating Instructions
Charging AA/AAA Batteries
- Insert 2 or 4 AA or AAA NiMH rechargeable batteries into the designated slots, observing the correct polarity (+ and -). The charger is designed to charge batteries in pairs.
- The LCD display will show the charging status for each inserted battery. A flashing battery icon indicates charging, while a solid icon indicates fully charged.
- Charging time for 4 AA 2100 mAh batteries is approximately 4 hours.
- Once fully charged, the charger will automatically switch to trickle charge or stop charging to prevent overcharging.
- Remove the batteries from the charger once charging is complete.
Charging 9V Batteries
- Insert one 9V NiMH rechargeable battery into the dedicated 9V slot, ensuring correct polarity.
- The LCD display will show the charging status for the 9V battery.
- Remove the 9V battery once charging is complete.
Using the USB Output
- Connect your USB-powered device (e.g., smartphone, tablet) to the USB output port on the side of the charger using a compatible USB cable.
- The charger can charge AA/AAA/9V batteries and a USB device simultaneously.
- The LCD display will indicate when the USB output is active.
Maintenance
- Cleaning: Disconnect the charger from the power outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: Store the charger and batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging NiMH batteries frequently. Recharge them when they are low.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not working / LCD not illuminating. | No power supply. | Ensure the charger is securely plugged into a live power outlet. Check the outlet with another device. |
| Batteries not charging. | Incorrect battery insertion (polarity). Non-rechargeable batteries inserted. Damaged or faulty batteries. | Re-insert batteries with correct polarity. Ensure only NiMH rechargeable batteries are used. Replace faulty batteries. |
| Charging stops prematurely. | Battery fully charged (Minus Delta U cut-off). Safety timer activated. | This is normal operation. Remove batteries once charging is indicated as complete. |
| USB device not charging. | USB cable faulty. Device not compatible or requires higher current. | Try a different USB cable. Ensure your device is compatible with 5V USB charging. |
Specifications
| Brand: | VARTA |
| Model Number: | 57677101 (also referred to as 2269397-6) |
| Color: | Black/Anthracite |
| Product Dimensions (DxWxH): | 7.7P x 11.5l x 5.7H cm (approximately 3.03 x 4.53 x 2.24 inches) |
| Item Weight: | 138 Grams (approximately 4.87 ounces) |
| Input Voltage: | 9 Volt (AC input via wall plug) |
| Output Voltage (Battery Charging): | 9 Volt (for 9V battery) |
| Output Current (Rated): | 4 Ampere (total, distributed across charging channels) |
| USB Output: | 5V, up to 900mA |
| Battery Charge Time: | Approximately 4 Hours (for 4x AA 2100 mAh batteries) |
| Compatible Battery Types: | NiMH AA, AAA, 9V rechargeable batteries |
| Compatible Devices (USB Out): | Smartphones and other USB-powered devices |
| Number of Ports: | 4 (AA/AAA slots) + 1 (9V slot) + 1 (USB output) |
| Safety Features: | Minus Delta U cut-off, Safety Timer, Short-circuit Protection, Alkaline Battery Detection, Wrong Polarity Protection |
| Certifications: | CE |
Warranty
The VARTA LCD Plug Charger comes with a product warranty of 3 years. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Support
For further assistance, technical support, or warranty inquiries, please contact VARTA customer service. Refer to the official VARTA website or product packaging for the most up-to-date contact information.
You can also visit the official VARTA store on Amazon for more product information: VARTA Store







