Introduction
Thank you for choosing the Schlage F51A ACC 619 Accent Keyed Entry Door Lever. This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your new door lever. Please read all instructions carefully before beginning installation to ensure proper function and safety.
Safety Information
- Always wear appropriate safety gear, such as safety glasses, during installation.
- Keep small parts away from children to prevent choking hazards.
- Ensure all screws are tightened securely, but do not overtighten, as this may damage the hardware.
- If you are unsure about any step, consult a qualified locksmith or professional installer.
Package Contents
Verify that all components are present before beginning installation:
- Exterior Lever Assembly with Key Cylinder
- Interior Lever Assembly with Thumb Turn
- Latch Bolt Assembly
- Strike Plate
- Mounting Screws
- 2 Keys
- Installation Instructions (this manual)
Setup and Installation
The Schlage F51A ACC 619 Accent Keyed Entry Door Lever is designed for easy installation on standard doors. A screwdriver is typically the only tool required for upgrading existing single bore hole doors.
1. Prepare the Door
Ensure your door meets the following specifications:
- Door Thickness: 1-3/8" to 1-3/4" (35mm to 44mm)
- Backset: Adjustable for 2-3/8" (60mm) or 2-3/4" (70mm)
- Cross Bore Hole Diameter: 2-1/8" (54mm)
- Latch Bore Diameter: 1" (25mm)
Image Description: A technical diagram illustrating the required measurements for door preparation, including the backset, cross bore hole diameter, latch bore diameter, and door thickness, ensuring compatibility with the Schlage door lever.
2. Install the Latch Bolt
Insert the latch bolt into the edge of the door, ensuring the bevel faces the door frame. Secure it with the provided screws. The universal latch slides easily into place without tools to fit standard backsets.
3. Install the Exterior and Interior Levers
Align the exterior lever assembly with the latch bolt, feeding the spindle through the latch. Then, align the interior lever assembly, ensuring the thumb turn is positioned correctly. Secure both assemblies with the mounting screws, utilizing the self-aligning screw holes for hassle-free installation.
Image Description: A close-up view of the exterior side of the Schlage Accent door lever in Satin Nickel, clearly showing the keyhole for keyed entry.
Image Description: A close-up view of the interior side of the Schlage Accent door lever in Satin Nickel, highlighting the thumb turn mechanism for locking and unlocking from inside.
4. Install the Strike Plate
Install the strike plate on the door frame, aligning it with the latch bolt. Secure it with the provided screws.
5. Test Operation
Test the lever's operation from both the interior and exterior to ensure smooth locking and unlocking. Use the key from the exterior and the thumb turn from the interior.
Video Description: An official Schlage brand video highlighting the company's commitment to security and quality, demonstrating the trust customers place in Schlage products for their homes.
Operating Instructions
Locking from the Exterior
Insert the key into the key cylinder and turn it to the locked position. Remove the key. The lever will now be locked from the exterior.
Unlocking from the Exterior
Insert the key into the key cylinder and turn it to the unlocked position. The lever will now operate freely.
Locking from the Interior
Rotate the thumb turn on the interior lever to the locked position. The lever will now be locked from the exterior.
Unlocking from the Interior
Rotate the thumb turn on the interior lever to the unlocked position. The lever will now operate freely. This keyed entry function allows for quick exit by simply rotating the interior lever.
Maintenance
To ensure the longevity and smooth operation of your Schlage door lever, follow these maintenance guidelines:
- Cleaning: Clean the lever with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Lubrication: Periodically apply a small amount of graphite-based lubricant to the key cylinder to maintain smooth key insertion and turning. Do not use oil-based lubricants.
- Tightening Screws: Check mounting screws periodically and tighten if necessary to prevent wobbling or misalignment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lever is stiff or hard to turn. | Lack of lubrication, misaligned components. | Apply graphite lubricant to the key cylinder. Check for proper alignment of the lever and latch bolt. |
| Key does not turn or is difficult to insert. | Debris in keyway, worn key, or cylinder issue. | Clean keyway with compressed air. Try a different key. If problem persists, contact support. |
| Lever is loose or wobbly. | Mounting screws are loose. | Tighten the mounting screws on both sides of the door. |
| Door does not latch properly. | Latch bolt or strike plate misalignment. | Adjust the position of the strike plate on the door frame. Ensure the latch bolt is fully extending. |
Specifications
- Model: F51AACC619
- Type: Keyed Entry Door Lever
- Finish: Satin Nickel
- Material: Metal
- Product Dimensions: 5.5"L x 2.25"W
- Door Thickness Range: 1-3/8" to 1-3/4"
- Backset: Adjustable 2-3/8" or 2-3/4"
- Security Rating: Grade 2/AAA Certified BHMA
- Hand Orientation: Universal
- Included Components: Installation Hardware, Installation Instructions, 2 Keys
Warranty & Support
Schlage locks are backed by a limited lifetime mechanical and finish warranty. This warranty covers defects in material and workmanship for the lifetime of the product for the original residential user. Additionally, a 3-year electronics warranty applies if applicable (this model is mechanical). For full details, please refer to the official Schlage warranty documentation or visit the Schlage website.
For technical assistance, troubleshooting, or warranty claims, please contact Schlage Customer Support:
- Website: www.schlage.com
- Phone: Refer to your regional Schlage support contact information.
