1. Important Safety Information
Please read all instructions carefully before beginning installation. Failure to follow these instructions may result in electrical shock, fire, or other hazards that could cause injury or property damage.
- WARNING: Risk of electrical shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with electrical wiring.
- Do not install this fixture in wet locations. For indoor use only.
- Ensure all connections are secure and properly insulated.
- Do not exceed the maximum wattage specified for the light bulbs.
- Handle glass components with care to prevent breakage.
2. Product Overview
The EGLO Ella Ceiling Light, Model 90418A, is a flush mount fixture designed for indoor use. Its simplistic design with a round white opal glass shade provides a clean and uniform illumination, suitable for various interior styles.
2.1. Package Contents
- Ella Ceiling Light Fixture (Model 90418A)
- Mounting Hardware Kit
- Instruction Manual
2.2. Product Features
- Simple and clean flush mount design.
- Requires 3 x 60W Incandescent A-19 bulbs (not included).
- Mounts to either a wall or ceiling.
- Opal white glass shade for diffused light.
Figure 1: The EGLO Ella Ceiling Light Model 90418A, showcasing its minimalist design and diffused light output.
3. Setup and Installation
3.1. Tools Required
- Phillips Head Screwdriver
- Wire Strippers
- Electrical Tape
- Ladder (if installing on ceiling)
- Safety Glasses
3.2. Mounting Instructions
- Turn off power: Locate the circuit breaker or fuse box that controls the power to the installation location. Turn off the power completely.
- Prepare mounting surface: Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- Attach mounting bracket: Secure the fixture's mounting bracket to the electrical box using the screws provided in the hardware kit.
- Make electrical connections: Connect the fixture's wires to the corresponding household wires. Typically, black to black (live), white to white (neutral), and bare copper or green to bare copper or green (ground). Use wire nuts to secure connections and electrical tape for added insulation.
- Secure the fixture: Carefully align the fixture base with the mounting bracket and secure it in place using the provided screws or fasteners.
- Install light bulbs: Insert three A-19 incandescent bulbs (max 60W each) into the sockets. Do not overtighten.
- Attach glass shade: Carefully place the opal glass shade onto the fixture and secure it according to the specific design (e.g., twist-lock or screw-on).
- Restore power: Turn the power back on at the circuit breaker or fuse box. Test the light fixture.
Figure 2: Product dimensions for the EGLO Ella Ceiling Light Model 90418A. Length: 18 inches, Height: 5.82 inches.
4. Operating Instructions
The EGLO Ella Ceiling Light is operated via a standard wall switch connected to the electrical circuit. It does not feature integrated dimming or remote control functionality unless connected to an external compatible system.
4.1. Powering On/Off
Use the wall switch connected to the fixture to turn the light on or off.
4.2. Light Source Replacement
To replace bulbs:
- Turn off power to the fixture at the circuit breaker.
- Carefully remove the glass shade.
- Allow old bulbs to cool before unscrewing them.
- Screw in new A-19 incandescent bulbs (max 60W each).
- Reattach the glass shade.
- Restore power and test.
5. Maintenance
5.1. Cleaning
To clean the fixture:
- Ensure power is turned off at the circuit breaker before cleaning.
- Wipe the metal parts with a soft, dry cloth.
- The glass shade can be cleaned with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners.
- Do not spray cleaner directly onto electrical components.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connections. Faulty bulb. | Check circuit breaker. Verify all wire connections are secure (with power off). Replace bulb. |
| Light flickers. | Loose bulb. Loose wire connection. Incorrect bulb type/wattage. | Tighten bulb. Check wire connections (with power off). Ensure correct bulb type and wattage are used. |
| Glass shade is difficult to attach/remove. | Misalignment. Debris in threads/grooves. | Ensure proper alignment. Clean threads/grooves. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | EGLO |
| Model Number | 90418A |
| Color | White |
| Material | Glass (Shade), Iron (Fixture) |
| Style | Contemporary |
| Light Fixture Form | Close to Ceiling / Flush Mount |
| Room Type | Hallway, Utility Room, General Indoor |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Control Method | Wall Switch (Remote if external system used) |
| Light Source Type | A-19 Incandescent (Bulbs not included) |
| Number of Light Sources | 3 |
| Voltage | 120 Volts |
| Max Wattage per Bulb | 60 Watts |
| Total Wattage | 180 Watts (3 x 60W) |
| Item Dimensions (L x W x H) | 18"L x 18"W x 5.82"H (approximate) |
| Item Weight | 7 Pounds |
| UPC | 010973175520 |
8. Warranty and Support
8.1. Warranty Information
All EGLO products purchased are covered by a 1-year warranty, effective from the original shipping date. This warranty covers all items and conditions specified in the original manufacturer's warranty. Additionally, a 30-day replacement parts policy is in place to ensure a fully functional item upon receipt.
The warranty does not cover loss, theft, water damage, customer abuse, or finish deterioration due to UV or coastal exposure.
8.2. Customer Support
For technical assistance, replacement parts, or warranty claims, please contact EGLO customer support. Refer to your purchase documentation or the official EGLO website for current contact information.
You can also visit the EGLO Store on Amazon for more product information and support resources.
